Browse Articles

Discover research articles across all indexed journals

Arylamine‐Linked Porous Organic Polymers with Abundant Redox‐Active Sites as High‐Capacity and High‐Rate Organic Cathodes for Lithium‐Ion Batteries

Advanced Materials Qiaoshuang Bai, Junlong Huang, Kehan Tang et al. Apr 01, 2025 DOI: 10.1002/adma.202416661

Abstract Redox‐active porous organic polymers (POPs) have emerged as promising and sustainable organic cathode materials (OCMs) for lithium‐ion batteries (LIBs). However, their performance is significantly limited by insufficient redox‐active sites and low intrinsic conductivity. Herein, a series of novel arylamine‐linked and bipolar POPs (denoted as HATN‐AQ, HATN‐BQ, HATN‐CBD, and HATN‐PTO) are designed and prepared as OCMs for LIBs. Benefiting from their high density of redox‐active sites, bipolar feature, and arylamine linkage, these POPs exhibited high capacity, high rate, and excellent long‐term cycling stability. Among them, HATN‐PTO displayed an ultrahigh reversible capacity of 329.6 mAh g −1 at 0.2 A g −1 with a high energy density of 716.7 Wh kg −1 , outstanding rate performance (208.7 mAh g −1 at 20 A g −1 ), and superior cycling stability (188.9 mAh g −1 capacity retained after 500 cycles at 1 A g −1 ). Furthermore, the HATN‐PTO//graphite full battery exhibited a high specific capacity of 227.3 mAh g −1 at 0.2 A g −1 and maintained a high capacity of 99.1 mAh g −1 after 200 cycles at 0.5 A g −1 . Ex situ FT‐IR and XPS spectra combined with theoretical calculations are employed to elucidate the dual‐ion storage mechanism. This work provides an effective strategy for designing POPs with high‐capacity and high‐rate for OCMs.

Correction to Supporting Information for Wang et al., Metabolomic insights into pathogenesis and therapeutic potential in adult acute lymphoblastic leukemia

Proceedings of the National Academy of Sciences Apr 01, 2025 DOI: 10.1073/pnas.2504173122

Nonlocal Conduction in a Metawire

Advanced Materials Julio Andrés Iglesias Martínez, Yi Chen, Ke Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202415278

Abstract Ohm's law of electric conduction is local in the sense that the current density at one position only depends on the electric field at that same position. For a nonlocal medium, the current density at one position depends on the electric field at other positions within the medium as well. As a result of Ohm's law, doubling the length of a wire doubles its resistance. Here, electrically conducting nonlocal architectures are discussed theoretically and experimentally for which changing the length of the metawire rather leads to a complex oscillatory behavior versus wire length. This oscillatory behavior is connected to local currents inside of the metawire flowing in the opposite direction than the externally applied field. The theoretical and experimental results for electric conduction can directly be transferred to thermal conduction or particle diffusion and may enable remote sensing applications.

Importance of metallic nanotube flexibility on its field emission characteristics

Applied Physics Letters Nathaniel Hernandez, Marc Cahay, Jonathan Ludwick et al. Apr 01, 2025 DOI: 10.1063/5.0257675

It is known that field electron emission (FE) characteristics of emitters are influenced by their flexibility, as bending under an applied electrostatic field, EP, can significantly increase their characteristic field enhancement factor and emission current. However, this effect has not been thoroughly studied. In this Letter, a numerical algorithm is developed to investigate the impact of electrostatic forces on the FE properties of a flexible metallic carbon nanotube (CNT), classically modeled as a cylinder with a hemi-spherical cap, as a function of EP, its sharpness aspect ratio, and its initial (assumed to be fixed) angle θ0 of inclination with the substrate, i.e., the horizontal emitter's plate. Our numerical simulations are based on an iterative process to include the mechanical stress problem and resulting bending of the CNT, taking into account its finite Young's modulus and the electrostatic problem due to the redistribution of surface charges on the emitter until a convergent solution is found. The process is repeated as a function of EP. Importantly, it is found that the emitted current of the bendable CNT can be several orders of magnitude larger than those for the case when the emitter is modeled as a rigid body. Moreover, the curvatures of the Murphy–Good plots predicted theoretically align with those observed experimentally in FE from carbon-based materials under the high EP limit, where protrusion deflection effects are likely to influence emission. Therefore, our findings highlight the necessity of considering the flexibility of nanoscale field emitters to accurately interpret their FE characteristics.

Top companies and drugs by sales in 2024

Nature Reviews Drug Discovery Paul Verdin Apr 01, 2025 DOI: 10.1038/d41573-025-00049-3

High‐Entropy Metal Sulfide Nanocrystal Libraries for Highly Reversible Sodium Storage

Advanced Materials Fei Zhang, Tianyi Gao, Ying Zhang et al. Apr 01, 2025 DOI: 10.1002/adma.202418890

AbstractControlled synthesis of high‐entropy materials offers a unique platform to explore unprecedented electrochemical properties. High‐entropy metal sulfides (HEMSs) have recently emerged as promising electrodes in electrochemical energy storage applications. However, synthesizing HEMSs with a tunable number of components and composition is still challenging. Here, a HEMS library is built by using a general synthetic approach, enabling the synthesis of HEMS with arbitrary combinations of 5 to 12 out of 28 elements in the periodic table. The formation of a solid solution of HEMS is attributed to the two‐step method that lowers the energy barrier and facilitates the sulfur diffusion during the synthesis. The hard soft acid base (HSAB) theory is used to precisely describe the conversion rates of the metal precursors during the synthesis. The HEMSs as cathodes in Na‐ion batteries (SIBs) is investigated, where 7‐component HEMS (7‐HEMS) delivers a promising rate capability and an exceptional sodium storage performance with reversible a capacity of 230 mAh g−1 over 3000 cycles. This work paves the way for the multidisciplinary exploration of HEMSs and their potential in electrochemical energy storage.

Generating Self‐Adjuvated Nanofiber Vaccines by Coating Bacterial Flagella with Antigens

Advanced Materials Zhenzhen Fu, Sisi Lin, Huan Chen et al. Apr 01, 2025 DOI: 10.1002/adma.202415887

Abstract Bacteria‐based vaccines have received increasing attention given the ability to induce strong systemic immune responses. However, the application of bacteria as therapeutic agents inevitably suffers from infection‐associated side effects due to the living characteristics. Here, the use of bacteria‐derived flagella is described to construct self‐adjuvated nanofiber vaccines. With the help of charge‐reversal mediated by decoration with cationic polymers, the flagella can be coated with negatively charged antigens through electrostatic interaction. By virtue of the large aspect ratio, the resulting nanofiber vaccines show prolonged retention at the injection site and increased uptake by dendritic cells and macrophages. Thanks to the innate immunogenicity, self‐adjuvated flagella robustly promote dendritic cell maturation and macrophage polarization, resulting in the elicitation of antigen‐specific T‐cell and B‐cell immune responses. In ovalbumin‐overexpressing melanoma‐bearing mice, immunization with ovalbumin‐carried vaccines not only exhibits a favorable tolerance, but also displays superior inhibition efficacies on tumor growth and metastasis separately under the therapeutic and prophylactic settings. The flexibility of this approach is further demonstrated for vaccine fabrication by coating with the SARS‐CoV‐2 Spike protein S1 subunit. Bacterial flagella‐based self‐adjuvated nanofiber platform proposes a versatile strategy to develop various vaccines for disease prevention and treatment.

Formation of Ni Schottky contact and quasi-vertical Schottky barrier diode on SnO2 thin film

Applied Physics Letters Fengxin Liu, Qi Zhang, Yue Chen et al. Apr 01, 2025 DOI: 10.1063/5.0239201

In the past, forming a Schottky contact on SnO2 with metal has been a significant challenge due to the surface electron accumulation layer on the SnO2 surface. In this study, we report a steady and reproducible Schottky contact between the Ni and the SnO2 (101) planes. Furthermore, we evaluate a quasi-vertical SnO2 Schottky diode. High-quality Nb:SnO2 and SnO2 single-crystal films with (101) plane orientation were grown sequentially on r-sapphire substrates by radio frequency magnetron sputtering in a mixed atmosphere of Ar and O2. By etching and liftoff, a Ni anode and an In cathode were deposited on SnO2 and Nb:SnO2, respectively, to make a Schottky diode. The diode has a Schottky barrier height of 0.64 eV and a specific on-resistance of 32 mΩ cm2, indicating good performance. X-ray photoelectron spectra reveal the upward band bending from bulk to surface of the (101) SnO2 film, which contributes to the formation of the Schottky contact with Ni.

Cancer statistics for African American and Black people, 2025

CA: A Cancer Journal for Clinicians Anatu H. Saka, Angela N. Giaquinto, Lauren E. McCullough et al. Apr 01, 2025 DOI: 10.3322/caac.21874

Abstract African American and other Black individuals (referred to as Black people in this article) have a disproportionate cancer burden, including the lowest survival of any racial or ethnic group for most cancers. Every 3 years, the American Cancer Society estimates the number of new cancer cases and deaths for Black people in the United States and compiles the most recent data on cancer incidence (herein through 2021), mortality (through 2022), survival, screening, and risk factors using population‐based data from the National Cancer Institute and the Centers for Disease Control and Prevention. In 2025, there will be approximately 248,470 new cancer cases and 73,240 cancer deaths among Black people in the United States. Black men have experienced the largest relative decline in cancer mortality from 1991 to 2022 overall (49%) and in almost every 10‐year age group, by as much as 65%–67% in the group aged 40–59 years. This progress largely reflects historical reductions in smoking initiation among Black teens, advances in treatment, and earlier detections for some cancers. Nevertheless, during the most recent 5 years, Black men had 16% higher mortality than White men despite just 4% higher incidence, and Black women had 10% higher mortality than White women despite 9% lower incidence. Larger inequalities for mortality than for incidence reflect two‐fold higher death rates for prostate, uterine corpus, and stomach cancers and for myeloma, and 40%–50% higher rates for colorectal, breast, cervical, and liver cancers. The causes of ongoing disparities are multifactorial, but largely stem from inequalities in the social determinants of health that trace back to structural racism. Increasing diversity in clinical trials, enhancing provider education, and implementing financial incentives to ensure equitable care across the cancer care continuum would help close these gaps.

Upcoming FDA approval decisions in Q2 2025

Nature Reviews Drug Discovery Andrew Shui-Jezierski Apr 01, 2025 DOI: 10.1038/d41573-025-00050-w

Formulation and Characterization of Novel Ionizable and Cationic Lipid Nanoparticles for the Delivery of Splice‐Switching Oligonucleotides

Advanced Materials Miina Ojansivu, Hanna M. G. Barriga, Margaret N. Holme et al. Apr 01, 2025 DOI: 10.1002/adma.202419538

AbstractDespite increasing knowledge about the mechanistic aspects of lipid nanoparticles (LNPs) as oligonucleotide carriers, the structure‐function relationship in LNPs has been generally overlooked. Understanding this correlation is critical in the rational design of LNPs. Here, a materials characterization approach is utilized, applying structural information from small‐angle X‐ray scattering experiments to design novel LNPs focusing on distinct lipid organizations with a minimal compositional variation. The lipid phase structures are characterized in these LNPs and their corresponding bulk lipid mixtures with small‐angle scattering techniques, and the LNP‐cell interactions in vitro with respect to cytotoxicity, hemolysis, cargo delivery, cell uptake, and lysosomal swelling. An LNP is identified that outperforms Onpattro lipid composition using lipid components and molar ratios which differ from the gold standard clinical LNPs. The base structure of these LNPs has an inverse micellar phase organization, whereas the LNPs with inverted hexagonal phases are not functional, suggesting that this phase formation may not be needed for LNP‐mediated oligonucleotide delivery. The importance of stabilizer choice for the LNP function is demonstrated and super‐resolution microscopy highlights the complexity of the delivery mechanisms, where lysosomal swelling for the majority of LNPs is observed. This study highlights the importance of advanced characterization for the rational design of LNPs to enable the study of structure‐function relationships.

Epitaxial Ferroelectric Hexagonal Boron Nitride Grown on Graphene

Advanced Materials Sheng‐Shong Wong, Zhen‐You Lin, Sheng‐Zhu Ho et al. Apr 01, 2025 DOI: 10.1002/adma.202414442

Abstract Ferroelectricity realized in van der Waals (vdW) materials with non‐centrosymmetric stacking configurations holds promise for future 2D devices with nonvolatile and reconfigurable functionalities. However, the epitaxial growth of ferroelectric vdW materials often struggles to achieve an energetically unfavorable stacking configuration that enables electric polarization. This challenge is particularly evident when performing heteroepitaxy on another vdW substrate to create versatile and scalable ferroelectric building blocks designed for large‐area, atomic‐scale thicknesses. Here, epitaxial hexagonal boron nitride (h‐BN) multilayer films are successfully grew on single‐crystal graphene synthesized on a miscut SiC (0001) substrate. Theoretical calculations illustrate that the moiré‐patterned h‐BN/graphene hetero‐interface intrinsically exhibits polarization, leading to a polarized AB stacking in multilayer h‐BN films to minimize the total formation energy, which is validated experimentally by the layer‐dependent band dispersions. The as‐grown multilayer h‐BN layers demonstrated robust, homogeneous ferroelectricity with switchable out‐of‐plane polarization via interlayer sliding. This study establishes an effective route for stacking‐controlled heteroepitaxy, enabling the large‐scale integration of vdW materials with ferroelectricity and versatile functionalities, offering a promising platform for next‐generation 2D ferroelectric devices.

Magnetic bimeron traveling on the domain wall

Applied Physics Letters Jiwen Chen, Laichuan Shen, Hongyu An et al. Apr 01, 2025 DOI: 10.1063/5.0249927

Domain wall bimerons are nanoscale spin textures residing within the magnetic domain walls of in-plane magnets. In this study, we employ both numerical and analytical methods to explore the stabilization of Néel-type domain wall bimerons and their dynamics when excited by spin–orbit torque. Our findings reveal two unique and intriguing dynamic mechanisms, which depend on the polarization direction of the spin current: In the first scenario, the magnetic domain wall serves as a track that confines the motion of the bimeron and effectively suppresses the skyrmion Hall effect. In the second scenario, pushing the magnetic domain wall triggers a rapid sliding of the bimeron along the wall. This process significantly enhances the dynamics of the bimeron, resulting in a velocity increase by approximately 40 times compared to skyrmions and bimeron solitons. Our results highlight the potential advantages of the skyrmion Hall effect in developing energy-efficient spintronic devices based on domain wall bimerons.

Engineered nasal bacteria slide drugs into the brain

Nature Reviews Drug Discovery M. Teresa Villanueva Apr 01, 2025 DOI: 10.1038/d41573-025-00048-4

Manipulating Molecular Stacking for Semitransparent Organic Photovoltaics Achieving Light Utilization Efficiency >6%

Advanced Materials Junyuan Ding, Hongyu Mou, Haiyang Chen et al. Apr 01, 2025 DOI: 10.1002/adma.202420439

Abstract The trade‐off between average visible transmittance (AVT) and power conversion efficiency (PCE), governed by the molecular stacking of the donor and acceptor materials in semitransparent organic solar cells (ST‐OSCs), significantly constrains improvements in light utilization efficiency (LUE). Here, simultaneous enhancement of AVT and PCE is achieved by meticulously designing host‐guest active layers to fine‐tune the molecular stacking. A systematic investigation of various host donor and guest material combinations reveals that the donor material (D18) with more electron‐deficient hydrogen atoms tends to form C─H···O interactions with the guest material (BTO‐BO) that features electron‐rich oxygen atoms. Hydrogen bonding interactions between host donor D18 and guest BTO‐BO facilitate the transition from mixed J ‐type and H ‐type molecular stacking modes of the donor to predominant J ‐type stacking during crystallization, significantly reducing visible absorption and enhancing hole transport. Additionally, BTO‐BO can act as a nucleation agent for the host acceptor BTP‐eC9 to increase the crystallinity and absorption coefficient of the active layer, thereby, enhancing near‐infrared light absorption. The resultant toluene‐processed ST‐OSCs with optical modulation exhibit simultaneous improvement in PCE and AVT, delivering record LUEs of 6.02%. Notably, this host‐guest active layer demonstrates exceptional compatibility with flexible devices and promising scalability for greenhouse photovoltaic applications.

Toward Intrinsically Stretchable OLEDs with High Efficiency

Advanced Materials Huanyu Zhou, Hyun‐Wook Kim, Woo Jin Jeong et al. Apr 01, 2025 DOI: 10.1002/adma.202420008

AbstractWearable electronics require stretchable displays that can withstand large and repeated mechanical deformation without failure. Intrinsically stretchable organic light‐emitting diodes (ISOLEDs) that operate under DC voltage provide promising candidates for wearable display applications. However, the lack of sophisticated stretchable materials and processing techniques suitable for ISOLEDs results in a significant deficit in the efficiency of state‐of‐the‐art ISOLEDs compared to industrial standards. The design of stretchable conducting and semiconducting materials poses a significant challenge because of trade‐off relationships between stretchability and properties such as conductivity and charge carrier mobility. To increase the efficiency of ISOLEDs to meet industrial standards, strategies to overcome these trade‐offs must be developed. This perspective discusses recent progress and challenges in designing stretchable electrodes, light‐emitting materials, transport materials, and potential applications of ISOLEDs. It provides a useful guide in this field to develop efficient ISOLEDs for system‐level integration.

Enhanced polarization locking in VCSELs

Applied Physics Letters Zifeng Yuan, Dewen Zhang, Lei Shi et al. Apr 01, 2025 DOI: 10.1063/5.0259836

While optical injection locking (OIL) of vertical-cavity surface-emitting lasers (VCSELs) has been widely studied in the past, the polarization dynamics of OIL have received far less attention. Recent studies suggest that polarization locking via OIL could enable novel computational applications such as polarization-encoded Ising computers. However, the inherent polarization preference and limited polarization switchability of VCSELs hinder their use for such purposes. To address these challenges, we fabricate VCSELs with tailored oxide aperture designs and combine these with bias current tuning to study the overall impact on polarization locking. Experimental results demonstrate that this approach reduces the required injection power (to as low as 3.6 μW) and expands the locking range. To investigate the impact of the approach, the spin-flip model is used to analyze the effects of amplitude anisotropy and bias current on polarization locking, demonstrating strong coherence with experimental results.

Bluebird Bio’s cut-price sale highlights challenges for gene therapy field

Nature Reviews Drug Discovery Asher Mullard Apr 01, 2025 DOI: 10.1038/d41573-025-00046-6

Smart Polydimethylsiloxane Materials: Versatility for Electrical and Electronic Devices Applications

Advanced Materials Xing Yang, Wenjie Huang, Hao Dong et al. Apr 01, 2025 DOI: 10.1002/adma.202500472

AbstractBio‐inspired autonomous smart polydimethylsiloxane (PDMS) and its composite materials hold immense promise for a wide range of applications in electrical and electronic devices. These materials mimic natural protective mechanisms with self‐healing, self‐reporting, and self‐cleaning properties, enabling innovative and efficient device design. Smart PDMS materials autonomously activate repair mechanisms in response to mechanical or electrical damage, achieving rapid structural and functional recovery and preventing failure due to the accumulation of minor damage. These materials can intuitively report their status through striking color changes, fluorescence, or luminescence when exposed to external stimuli, providing efficient and practical visual feedback for device health monitoring and fault warning. They also have the capacity to effectively eliminate contaminants and ice deposits from their surfaces, thereby ensuring stable device operation. This review aims to introduce the current research progress in self‐healing, self‐cleaning, and self‐reporting PDMS materials. The review systematically discusses the principles, methodological innovations, mechanistic analysis, and applications of these materials, highlighting their significant potential for applications in the field of electrical and electronic devices. Moreover, the review provides an in‐depth analysis of the key challenges facing current research and offers insights into future research directions and strategies.

Acoustic Valley Filter, Valve, and Diverter

Advanced Materials Hao Wu, Hailong He, Liping Ye et al. Apr 01, 2025 DOI: 10.1002/adma.202500757

Abstract The discovery of valley degrees of freedom in electronic and classical waves opened the field of valleytronics and offered the prospect for new devices based on valleys. However, the implementation of valley‐based devices remains challenging in practice. Here, by taking advantage of the flexibility of phononic crystals in design and fabrication, the realizations of valley devices, or filters, valves, and diverters for acoustic waves are reported. All the devices are configured as the structures of input and output ports bridged by channels. The phononic crystals serving as ports allow the propagation of both valley polarizations, whereas the phononic crystals serving as channels, as they are narrow, only allow the propagation of single polarizations. For valley filters that achieve valley‐polarized currents, the bridge channel is simply a straight single phononic crystal, but for valley valves that can turn off the valley‐polarized currents, the channel consists of two parts, allowing the propagation of opposite valley polarizations. The valley diverters have one input port, and two output ports, and thus a branched channel, and the three parts in the channel allow the propagation of the same valley polarizations, so that the energy flow can be partitioned. The results may serve as a basis for developing advanced acoustic valley devices.