Browse Articles
Discover research articles across all indexed journals
Adrenomedullin triggers insulin resistance
Isolated Metal Centers Activate Small Molecule Electrooxidation: Mechanisms and Applications
Abstract Electrochemical oxidation of small molecules shows great promise to substitute oxygen evolution reaction (OER) or hydrogen oxidation reaction (HOR) to enhance reaction kinetics and reduce energy consumption, as well as produce high‐valued chemicals or serve as fuels. For these oxidation reactions, high‐valence metal sites generated at oxidative potentials are typically considered as active sites to trigger the oxidation process of small molecules. Isolated atom site catalysts (IASCs) have been developed as an ideal system to precisely regulate the oxidation state and coordination environment of single‐metal centers, and thus optimize their catalytic property. The isolated metal sites in IASCs inherently possess a positive oxidation state, and can be more readily produce homogeneous high‐valence active sites under oxidative potentials than their nanoparticle counterparts. Meanwhile, IASCs merely possess the isolated metal centers but lack ensemble metal sites, which can alter the adsorption configurations of small molecules as compared with nanoparticle counterparts, and thus induce various reaction pathways and mechanisms to change product selectivity. More importantly, the construction of isolated metal centers is discovered to limit metal d‐electron back donation to CO 2p * orbital and reduce the overly strong adsorption of CO on ensemble metal sites, which resolve the CO poisoning problems in most small molecules electro‐oxidation reactions and thus improve catalytic stability. Based on these advantages of IASCs in the fields of electrochemical oxidation of small molecules, this review summarizes recent developments and advancements in IASCs in small molecules electro‐oxidation reactions, focusing on anodic HOR in fuel cells and OER in electrolytic cells as well as their alternative reactions, such as formic acid/methanol/ethanol/glycerol/urea/5‐hydroxymethylfurfural (HMF) oxidation reactions as key reactions. The catalytic merits of different oxidation reactions and the decoding of structure–activity relationships are specifically discussed to guide the precise design and structural regulation of IASCs from the perspective of a comprehensive reaction mechanism. Finally, future prospects and challenges are put forward, aiming to motivate more application possibilities for diverse functional IASCs.
2025 ACC/AHA/ACEP/NAEMSP/SCAI Guideline for the Management of Patients With Acute Coronary Syndromes: A Report of the American College of Cardiology/American Heart Association Joint Committee on Clinical Practice Guidelines
Aim: The “2025 ACC/AHA/ACEP/NAEMSP/SCAI Guideline for the Management of Patients With Acute Coronary Syndromes” incorporates new evidence since the “2013 ACCF/AHA Guideline for the Management of ST-Elevation Myocardial Infarction” and the corresponding “2014 AHA/ACC Guideline for the Management of Patients With Non–ST-Elevation Acute Coronary Syndromes” and the “2015 ACC/AHA/SCAI Focused Update on Primary Percutaneous Coronary Intervention for Patients With ST-Elevation Myocardial Infarction.” The “2025 ACC/AHA/ACEP/NAEMSP/SCAI Guideline for the Management of Patients With Acute Coronary Syndromes” and the “2021 ACC/AHA/SCAI Guideline for Coronary Artery Revascularization” retire and replace, respectively, the “2016 ACC/AHA Guideline Focused Update on Duration of Dual Antiplatelet Therapy in Patients With Coronary Artery Disease.” Methods: A comprehensive literature search was conducted from July 2023 to April 2024. Clinical studies, systematic reviews and meta-analyses, and other evidence conducted on human participants were identified that were published in English from MEDLINE (through PubMed), EMBASE, the Cochrane Library, Agency for Healthcare Research and Quality, and other selected databases relevant to this guideline. Structure: Many recommendations from previously published guidelines have been updated with new evidence, and new recommendations have been created when supported by published data.
Linear regulation of perovskite work function through organic molecular layer surface modification
Surface modification via organic molecular layers is an effective strategy for experimentally regulating the work function (Φ) of perovskites. However, achieving precise control over Φ of perovskites remains a significant challenge. In this study, Φ of the FAPbI3 perovskite surface is quantitatively regulated using anilinium (An) and its derivatives. Three factors contribute to the change in Φ (ΔΦ): surface structure relaxation, surface charge exchange, and modified layer potential difference (ΔV). After the modification of perovskite surface with anilinium (An) and its derivatives, ΔΦ of FAPbI3 correlates linearly with ΔV of the modified layer, as the contribution of surface structure relaxation to ΔΦ is negligible, and the contribution of interfacial charge exchange to ΔΦ remains constant. The experimental results also demonstrated that Φ of perovskite surface can be linearly regulated. In addition, the linear relationship between ΔΦ and ΔV applies to other organic groups and their derivatives, as well as other metal halide perovskites. This methodology offers a practical computational strategy to precisely regulate Φ of the perovskite surface by designing ΔV of the modified layer.
A platform for personalized ASO therapeutics
Paternal Cardiac Lesion Induces Cardiac Adaptation in Offspring
On-chip integration and strong coupling between ScAlN thin-film surface acoustic wave resonators and superconducting qubits
Thin-film surface acoustic wave (SAW) devices exhibit high quality factors and are promising candidates for quantum transducers, with significant potential for on-chip integration with high-coherence superconducting quantum circuits and optical resonators. However, the experimental demonstration of strong coupling between thin-film SAWs and superconducting qubits in the quantum regime remains a considerable challenge. In this study, we demonstrate strong coupling between a ScAlN thin-film SAW resonator and a high-coherence qubit on the same substrate, where the enhanced qubit coherence was achieved through selective ScAlN etching. Distinct multimode anticrossings are observed in both the qubit and SAW resonator frequency spectra, with extracted coupling strengths closely matching theoretical predictions. Additionally, we investigate qubit decay and the dissipation properties of the SAW resonator in the SAW-qubit hybrid system. Our results confirm the feasibility of integrating thin-film SAW devices with high-coherence superconducting circuits and offer valuable insights for optimizing the performance of such hybrid systems.
Reversing lysosomal dysfunction to treat PAH
Letter by Kakizaki and Räber Regarding Article, “Effect of Colchicine on Coronary Plaque Stability in Acute Coronary Syndrome as Assessed by Optical Coherence Tomography: The COLOCT Randomized Clinical Trial”
Record performance in intrinsic, impurity-free lateral diamond photoconductive semiconductor switches
Photoconductive semiconductor switches (PCSSs) are fabricated on type IIa diamond substrates with varying boron and nitrogen impurity levels (<1014–1016 cm−3). The photoresponse of lateral PCSS is reported over the incident laser wavelength range (212–240 nm), energy per pulse (5–65 μJ), and DC bias (−1.2 to +1.2 kV). The PCSS device with the lowest boron and nitrogen impurity concentration achieves the highest normalized responsivity of 9.1 × 10−8 A-cm/W-V, peak photocurrent of 8.0 A, and on/off ratio of 2.3 × 1011 at a DC bias of +1.2 kV with the potential for even higher currents at increased DC bias. All PCSS display fast rise times (<3 ns), limited by the laser's rise time. However, photoresponse measurements reveal that higher impurity levels reduce the photocurrent and decrease the on/off ratio. These results highlight the performance advantages of using low background concentration type IIa diamond substrates for PCSS fabrication and present a promising route toward advanced high-power, high-speed diamond-based switches.
Proximal cysteine residues in proteins promote Nε-carboxyalkylation of lysine residues by α-dicarbonyl compounds
The Future Is Now: Paradigm Shifts in Heart Transplantation in the United States
Enhancement-mode GaN/AlGaN p-channel field effect transistors with <i>I</i>D <b>&gt;</b> 110 mA/mm achieved through source/drain tunnel junction contacts
In this Letter, we present enhancement-mode (E-mode) GaN/AlGaN p-channel metal-oxide-semiconductor field effect transistors (MOSFETs) with excellent performance by introduction of polarization induced tunnel junctions to enhance the source/drain (S/D) contacts and lateral current spreading in the access regions. The S/D contact resistance (RC) of 19.84 Ω·mm at voltage of 5 V was obtained. The fabricated GaN p-MOSFET has a threshold voltage (VTH) of −0.86 V, a high drain current (ID) up to 115 mA/mm, a low on-resistance (Ron) of 52.6 Ω·mm, and an on/off current ratio (ION/IOFF) of 7.2 × 104. The monolithically fabricated GaN power high electron mobility transistor shows a breakdown voltage (BV) more than 1700 V. The proposed technology of GaN p-MOSFETs was promising in the applications of GaN logic and drivers for all-GaN monolithic power integrated circuits.
Androgen membrane receptor modulates muscle strength
Etchless InSe Cavities Based on Bound States in the Continuum for Enhanced Exciton‐Mediated Emission
Abstract Recently, fervent research interest is sparked to indium selenide (γ‐InSe) due to its dazzling optical and electronic properties. The direct bandgap in the near‐infrared (NIR) range ensures efficient carrier recombination in InSe, promoting impressive competency for lavish NIR applications. Nevertheless, the photoluminescence (PL) efficiency of InSe is significantly limited by out‐of‐plane (OP) excitons, adverse to practical devices. Herein, a facile and effective solution is proposed by introducing photonic bound‐states‐in‐the‐continuum (BIC) modes to enhance excitons in InSe through strengthened exciton‐photon coupling. This cavity is constructed simply by patterning a polymer grating onto the InSe flake without an etching process, achieving an impressive PL enhancement of over 200 times. By adjusting the cavity resonance wavelength, it can selectively amplify the exciton emission or the exciton‐exciton scattering process, which is not observable off‐cavity at room temperature. Additionally, the second harmonic generation (SHG) process in InSe can also be largely enhanced by over 400 times on the cavity. Notably, the etchless cavity design can be further extended to other nanostructures beyond grating. This research presents a feasible and efficient approach to enhancing the optical performance of OP excitons, paving a prospective avenue for advanced linear and nonlinear photonic devices.
A conserved phosphorylation mechanism for regulating the interaction between the CMG replicative helicase and its forked DNA substrate
Return to Play With Genetic Heart Disease: The Importance of Developing a Personalized Emergency Action Plan
Optical fractional topological spatial differentiation
Optical spatial differentiations hold the capability of ultrahigh speed and low power consumption, providing an efficient solution for edge detection, feature extraction, and pattern recognition. However, existing optical spatial differentiators predominantly focus on integer-order operations, and fractional spatial differentiation remains challenging. In this work, we demonstrate fractional topological spatial differentiation through complex amplitude modulation in Fourier space. We derive and reveal the transfer function for fractional spatial differentiation, characterized by fractional power amplitude and fractional spiral phase. This distinctive feature is validated theoretically and experimentally in both spatial and frequency domains, and the underlying mechanism driving fractional differential imaging is elucidated. We apply fractional spatial differentiation to image texture and edge detection, resulting in enhanced texture features and dynamic edge evolution. This proof-of-principle study introduces a paradigm for optical fractional spatial differentiators, with potential applications in artificial intelligence, machine learning, and biomedical imaging.
A Novel Coating‐Extrusion Method Enabled, High Energy, Power Density, and Scalable Production in Monolithically Integrated Energy Storage Fibers
AbstractThe rise of wearable electronics demands flexible energy storage solutions like flexible fiber energy storage devices (FESDs), known for their flexibility and portability. However, it remains difficult for existing fabrication methods (typically, finite‐coating, thermal‐drawing, and solution‐extrusion) to simultaneously achieve desirable electrochemical performances and fast production of FESDs. Here, a new scalable coating‐extrusion method is developed, utilizing a novel extruded spinneret with tapered apertures to create dual pressure zones. These attributes reduced porosity, enhanced electrode materials loading, and stabilized the interface between the fiber electrode and gel electrolyte of FESDs, enabling the integration of three functional electrodes for the fabrication of both fiber LMO‐LTP batteries and fiber LMO/LTP‐AC hybrid supercapacitor within a single energy storage device. The resultant multifunctional device achieved a high specific capacity of 89.4 mAh g−1 in battery mode and demonstrated excellent rate performance of 20 C with nearly 50% capacity retention in supercapacitor mode, with a production rate of 6000 km year−1.