Browse Articles
Discover research articles across all indexed journals
Multi‐Objective Optimization of Ionic Polymer Electrolytes for High‐Voltage Fast‐Charging and Versatile Lithium Batteries
Abstract Designing ionic polymer electrolytes (IPEs) for high‐voltage and fast‐charging lithium batteries involves searching in a highly complex and discrete chemical space. Traditional material discovery processes struggle with this complexity due to high costs and long evaluation time. A kernel‐based Bayesian optimization is described to complete the multi‐objective optimization by considering ionic conductivity, electrochemical stability, and discharge capacity simultaneously. According to a recommender based on a union set of acquisition functions, promising IPEs through three iterations with only 2.8% of the chemical space is targeted. The achieved lithium metal batteries exhibit promising performance with ultrahigh cutoff voltage with NCM811 (LiNi 0.8 Co 0.1 Mn 0.1 O 2 , 4.8 V) and LNMO (LiNi 0.5 Mn 1.5 O 4 , 4.92 V). To further extend the versatility of IPEs and diminish the high cost associated with the glove‐box environment, an aqueous and high‐voltage lithium‐ion battery is developed by introducing water molecules in IPEs coupled with Li 4 Ti 5 O 12 ||LiMn 2 O 4 , a strong hydrogen bonding network formed between the rigid‐rod polyelectrolyte and the embedded water molecules, which effectively suppresses the water reactivity, meanwhile boosting the ionic conductivity. This work reveals an innovative multi‐objective optimization that effectively handles multi‐targets and discontinuous parameter space, offering critical insights to address complex challenges in material discovery and property optimization for advanced and versatile lithium batteries.
Red Phosphorescence at Elevated Temperatures Enabled by Dexter Energy Transfer in Polyaromatic Hydrocarbon‐Xanthone Systems
Abstract Organic materials with red persistent phosphorescence hold immense promise for biotechnology due to their excellent tissue permeability and high signal‐to‐background ratios. However, inefficient spin‐orbit coupling, high triplet susceptibility, and narrow energy gapspromoted nonradiative deactivations, pose a formidable obstacle to achieving efficient red phosphorescence. This study addresses these challenges by introducing xanthone (Xan)‐based host–guest systems. Utilizing polyaromatic hydrocarbons (PAHs) as guests, efficient red to near‐infrared (NIR) phosphorescent materials with ultralong lifetimes and high quantum yields of up to 821 ms and 2.32%, respectively, are successfully developed. Ultrafast spectroscopy and theoretical studies reveal that Dexter energy transfer (DET) is the dominant mechanism responsible for red phosphorescence. This DET process between Xan and PAHs not only effectively utilizes the dark triplet state of the Xan host but also significantly enhances the triplet generation of the PAH guests, transforming them into potent phosphorescent luminophores. Furthermore, the inherent rigidity of Xan and PAHs endows the resulting materials with excellent phosphorescence performance, even at elevated temperatures (e.g., 423 K). This strategy, proven to be general, paves the way for designing efficient red/NIR phosphorescent materials through the DET mechanism, enabling their applications in molecular imaging and advanced high‐temperature encryption.
Orbital Angular Momentum Correlated Charge to Spin Conversion in Metallic Antiferromagnet
AbstractCurrent‐induced spin‐orbit torque (SOT) allows efficient electrical manipulation on magnetization in spintronic devices. Maximizing the SOT efficiency is a key goal that is pursued via increasing the net spin generation and accumulation. However, spin transport in antiferromagnets is seriously restricted due to the strong antiferromagnetic coupling, which blocks the development of antiferromagnetic‐based devices. Here, a significant enhancement of SOT efficiency in Ir20Mn80 (IrMn)‐based heterostructure associated with the orbital effect of naturally oxidized Cu (Cu*) bottom layer is reported. Considering the weak spin–orbit coupling of Cu*, the enhancement results from an orbital current generated from charge current at the Cu*/IrMn interface that contributes to spin current in the IrMn layer due to the strong spin–orbit coupling. The SOT efficiency variation with IrMn thickness reveals the process of orbital angular momentum (OAM) transportation and conversion. Moreover, the contribution of orbital current is verified by the critical current density decreasing of SOT‐driven magnetization switching in Cu*/IrMn/[Co/Pt]3 heterostructure. This study opens a path to design high‐efficient SOT‐based spintronic devices combining the advantages of OAM and metallic antiferromagnets.
Engineered Living Memory Microspheroid‐Based Archival File System for Random Accessible In Vivo DNA Storage
Abstract Given its exceptional durability and high information density, deoxyribonucleic acid (DNA) has the potential to meet the escalating global demand for data storage if it can be stored efficiently and accessed randomly in exabyte‐to‐yottabyte‐scale databases. Here, this work introduces the Engineered Living Memory Microspheroid (ELMM) as a novel material for DNA data storage, retrieval, and management. This work engineers a plasmid library and devises a random access strategy pairing plasmid function with DNA data in a key‐value format. Each DNA segment is integrated with its corresponding plasmid, introduced into bacteria, and encapsulated within matrix material via droplet microfluidics within 5 min. ELMMs can be stored at room temperature following lyophilization and, upon rehydration, each type of ELMM exhibits specific functions expressed by the plasmids, allowing for physical differentiation based on these characteristics. This work demonstrates fluorescent expression as the plasmid function and employs fluorescence‐based sorting access image files in a prototype database. By utilizing N optical channels, to retrieve 2 N file types, each with a minimum of 10 copies. ELMM offers a digital‐to‐biological information solution, ensuring the preservation, access, replication, and management of files within large‐scale DNA databases.
Xylem embolism refilling revealed in stems of a weedy grass
Plant hydraulic dysfunction by embolism formation can impair photosynthesis, growth, and reproduction and, in severe cases, lead to death. Embolism reversal, or “refilling,” is a hypothesized adaptive process in which xylem functionality is rapidly and sustainably restored. This study investigated xylem embolism refilling during recovery from severe drought stress using entirely noninvasive measurements of the same plants. These results were considered in relation to functional traits to address long-standing gaps in understanding the consequences of severe drought stress. Leaf and stem xylem embolism as well as transpiration, photosynthesis, and stem water potential were characterized nondestructively on intact barnyard grass plants during an acute drought event. Plants were rewatered and returned to growth conditions for 10 d, during which time recovery of stem xylem embolism and transpiration were monitored. Leaf xylem embolism and declines in leaf gas exchange occurred mostly between −1.0 MPa and −2.0 MPa, whereas stem xylem embolism occurred mostly between −3.0 MPa and −4.0 MPa. In all measured plants, which included embolism levels up to 88%, stem xylem embolism reversed completely within 24 h after rewatering, and this refilling supported recovery of transpiration and growth after plants were returned to growth conditions. This study provides direct evidence of complete and functional stem xylem refilling. These results present a clear need to elucidate underlying mechanisms and the adaptive significance of this phenomenon as well as its prevalence in nature.
Anion Vacancies Coupling with Heterostructures Enable Advanced Aerogel Cathode for Ultrafast Aqueous Zinc‐Ion Storage
Abstract As a potential cathode material, manganese‐based sulfide has recently attracted increasing interest due to its many advantages in aqueous zinc‐ion storage. Unfortunately, some challenges such as sluggish kinetics, unstable structure, and controversial phase transition mechanism during the energy storage process hinder its practical application. Herein, inspired by density functional theory (DFT) calculations, a novel 3D sulfur vacancy‐rich and heterostructured MnS/MXene aerogel is designed, and used as a cathode for aqueous Zn‐ion batteries/hybrid capacitors (ZIBs/ZICs) for the first time. Thanks to the synergistic modification strategy of sulfur vacancies and heterostructures, the as‐constructed MnS/MXene//Zn ZIBs exhibit significantly enhanced electrochemical properties, especially outstanding rate capability and cyclic stability. More encouragingly, the as‐assembled MnS/MXene//porous carbon (PC) ZICs exhibit an ultrahigh energy density, a high power density, and a splendid cycling lifespan. Most notably, systematic kinetic analyses, ex situ characterizations, and DFT calculations illustrate that MnS/MXene first irreversibly converts into MnO x @ZnMnO 3 /MXene, and then undergoes a reversible conversion from MnO x @ZnMnO 3 /MXene to MnOOH@ZnMn 2 O 4 /MXene, accompanied by the co‐insertion/extraction of H + and Zn 2+ . The synergistic modification strategy of sulfur vacancies and heterostructures and the thorough mechanistic study proposed in this work offer valuable guidance for designing and exploiting high‐performance cathodes in aqueous zinc‐based energy storage devices.
CuPt Alloy Enabling the Tandem Catalysis for Reduction of HCOOH and NO <sub>3</sub> <sup>−</sup> to Urea at High Current Density
Abstract The formation of urea by electrocatalytic reduction of C 1 ‐reactants and NO 3 − is an attractive way to store renewable electricity, close the carbon cycle, and eliminate nitrate contaminants from wastewater. Involving insufficient supply of C 1 reactants and multiple electron transfers makes the reaction difficult to achieve high Faraday efficiency and high yield at high current density. Here, a urea synthesis approach is presented via electrocatalytic reductive coupling between liquid HCOOH and NO 3 − on copper foam (CF) loaded Cu 4 Pt catalyst with optimized ratios. A urea yield of 40.08 mg h −1 cm −2 is achieved with FE up to 58.1% at a current density of −502.3 mA cm −2 , superior to the productivity of previously reported catalysts. No degradation is observed over 120‐h continuous operation at such a high yield rate. The highly efficient activity of Cu 4 Pt/CF can be attributed to the synergetic effect between Pt and Cu sites via tandem catalysis, in which the doped Pt sites enrich liquid HCOOH reactants, promote HCOOH intermolecular dehydration, and form and adsorb large amounts of * CO key intermediates. The Cu sites can generate large quantities of the key intermediate * NH 2 . The Cu 4 Pt/CF adsorbed intermediates * CO and * NH 2 are the basis for subsequent thermodynamic spontaneous C─N coupling.
Metalloenzyme‐Inspired Cluster Fabrication within Mesoporous Channels Featuring Optimized Catalytic Microenvironments for Efficient Neutral pH H <sub>2</sub> O <sub>2</sub> Electrosynthesis
Abstract In nature, some metalloenzymes facilitate highly efficient catalytic transformations of small molecules, primarily attributed to the effective coupling between their metal cluster active sites and the surrounding microenvironment. Inspired by this, a thermotropic redispersion strategy to incorporate bismuth nanoclusters (Bi NCs) into mesoporous channels, mimicking metalloenzyme‐like catalysis to enhance the two‐electron oxygen reduction reaction (2e − ORR) for efficient neutral pH H 2 O 2 electrosynthesis, is developed. This model electrocatalyst exhibits exceptional 2e − ORR performance with >95% H 2 O 2 selectivity across 0.2–0.6 V vs RHE in neutral electrolyte. Notably, the system produces up to 7.2 wt% neutral H 2 O 2 solution at an industrially relevant current density of ≈320 mA cm −2 , with 90% Faradaic efficiency for H 2 O 2 over 120 h in a flow cell, demonstrating significant practical potential. Mechanistic insights reveal that the introduction of Bi NCs enhances the adsorption of the *OOH intermediate, facilitating a highly active 2e − ORR process. Moreover, the mesoporous channels of the carbon support create a favorable catalytic microenvironment for O 2 aeration and local alkalinity, further boosting H 2 O 2 productivity. This catalyst design mimics metalloenzymes by optimal integration of the active site with the surrounding microenvironment, offering valuable insights for the rational design of nature‐inspired small‐molecule catalysts.
Industrial‐current Ammonia Synthesis by Polarized Cuprous Cyanamide Coupled to Valorization of Glycerol at 4,000 mA cm<sup>−2</sup>
AbstractThe electrocatalytic nitrate reduction (NO3RR) holds significance in both NH3 synthesis and nitrate contamination remediation. However, achieving industrial‐scale current and high stability in membrane electrode assembly (MEA) electrolyzer remains challenging due to inherent high full‐cell voltage for sluggish NO3RR and water oxidation. Here, Cu2NCN with positive surface electrostatic potential VS(r) is applied as highly efficient NO3RR electrocatalysts to achieve industrial‐current and low‐voltage stable NH3 production in MEA electrolyzer with coupled anodic glycerol oxidation. This paired electro‐refinery (PER) system reaches 4000 mA cm−2 at 2.52 V and remains stable at industrial‐level 1000 mA cm−2 for 100 h with the NH3 production rate of 97000 µgNH3 h−1 cm−2 and a Faradaic efficiency of 83%. Theoretical calculations elucidate that the asymmetric and electron‐withdrawing [N−C≡N] units enhance polarization and VS(r), promoting robust and asymmetric adsorption of NO3* on Cu2NCN to facilitate O−N bond dissociation. A comprehensive techno‐economic analysis demonstrates the profitability and commercial viability of this coupled system. Our work opens a new avenue and marks a significant advancement in MEA systems for industrial NH3 synthesis.
Correction to Supporting Information for Schmidt et al., Archaeological adhesives made from <i>Podocarpus</i> document innovative potential in the African Middle Stone Age
Blue Perovskite Light‐Emitting Diodes Using Multifunctional Small Molecule Dopants
Abstract Unbalanced charge carrier injections and high densities of non‐radiative recombination channels are still major obstacles to advancing high‐efficiency blue perovskite light‐emitting diodes (LEDs). Here, a deep‐HOMO level p ‐type small molecule, (2‐(3,6‐dibromo‐9H‐carbazol‐9‐yl)ethyl)phosphonic acid, doped in blue perovskites for building a better‐balanced injection and controlling over defects is demonstrated. During the perovskite film deposition process, most small molecules are extruded from the precursor solution to the bottom and top surfaces of the perovskite films. This unique distribution of molecules can construct a better‐balanced carrier injection due to improved hole and retarded electron injection by its suitable energy‐level structure, along with modulation of all defects in bulk and at the surface of doped films due to the formation of covalent bonds by its functional moiety. With this approach, a series of blue perovskite LEDs is designed with external quantum efficiencies (EQEs) of up to 24.03% (at a luminance of 113 cd m −2 and emission peak of 485 nm), 16.61% (at a luminance of 51 cd m −2 and emission peak of 476 nm) and 8.55% (at a luminance of 30 cd m −2 and emission perk of 467 nm), and encouraging operational stability.
The Influence of Ionizing Radiation on Quantification for In Situ and Operando Liquid‐Phase Electron Microscopy
Abstract The ionizing radiation harnessed in electron microscopes or synchrotrons enables unique insights into nanoscale dynamics. In liquid‐phase transmission electron microscopy (LP‐TEM), irradiating a liquid sample with electrons offers access to real space information at an unmatched combination of temporal and spatial resolution. However, employing ionizing radiation for imaging can alter the Gibbs free energy landscape during the experiment. This is mainly due to radiolysis and the corresponding shift in chemical potential; however, experiments can also be affected by irradiation‐induced charging and heating. In this review, the state of the art in describing beam effects is summarized, theoretical and experimental assessment guidelines are provided, and strategies to obtain quantitative information under such conditions are discussed. While this review showcases these effects on LP‐TEM, the concepts that are discussed here can also be applied to other types of ionizing radiation used to probe liquid samples, such as synchrotron X‐rays.
Exploring the Mechanisms of Charge Transfer and Identifying Active Sites in the Hydrogen Evolution Reaction Using Hollow C@MoS<sub>2</sub>‐Au@CdS Nanostructures as Photocatalysts
AbstractPlasmonic metal–semiconductor nanocomposites are promising candidates for considerably enhancing the solar‐to‐hydrogen conversion efficiency of semiconductor‐based photocatalysts across the entire solar spectrum. However, the underlying enhancement mechanism remains unclear, and the overall efficiency is still low. Herein, a hollow C@MoS2‐Au@CdS nanocomposite photocatalyst is developed to achieve improved photocatalytic hydrogen evolution reaction (HER) across a broad spectral range. Transient absorption spectroscopy experiments and electromagnetic field simulations demonstrate that compared to the treated sample, the untreated sample exhibits a high density of sulfur vacancies. Consequently, under near‐field enhancement, photogenerated electrons from CdS and hot electrons generated by intra‐band or inter‐band transitions of Au nanoparticles are efficiently transferred to the CdS surface, thus significantly improving the HER activity of CdS. Additionally, in situ, Raman spectroscopy provided spectral evidence of S─H intermediate species on the CdS surface during the HER process, which is verified through isotope experiments. Density functional theory simulations identify sulfur atoms in CdS as the catalytic active sites for HER. These findings enhance the understanding of charge transfer mechanisms and HER pathways, offering valuable insights for the design of plasmonic photocatalysts with enhanced efficiency.
Cooling‐induced Strains in 2D Materials and Their Modulation via Interface Engineering
Abstract 2D materials exhibit unique properties for next‐generation electronics and quantum devices. However, their sensitivity to temperature variations, particularly concerning cooling‐induced strain, remains underexplored systematically. This study investigates the effects of cooling‐induced strain on monolayer MoSe 2 at cryogenic temperatures. It is emphasized that the mismatch in thermal expansion coefficients between the material and bulk substrate leads to significant external strain, which superimposes the internal strain of the material. By engineering the material‐substrate 2D‐bulk interface, the resulting strain conditions are characterized and reveal that substantial compressive strain induces new emission features linked to direct‐to‐indirect bandgap transition, as confirmed by photoluminescence and transient absorption spectroscopy studies. Finally, it is demonstrated that encapsulation with hexagonal boron nitride can mitigate the external strain by 2D–2D interfaces, achieving results similar to those of suspended samples. The findings address key challenges in quantifying and characterizing strain types across different 2D‐bulk interfaces, distinguishing cooling‐induced strain effects from other temperature‐dependent phenomena, and designing strain‐sensitive 2D material devices for extreme temperature conditions.
Immunotherapy combination shows longer progression‐free survival than chemotherapy alone for patients with a rare type of metastatic colorectal cancer
Triplet State Suppression for Energy Loss Reduction in 20% Nonhalogenated Solvent Processed Binary Organic Solar Cells
AbstractBoosting power conversion efficiency (PCE) of organic solar cells (OSCs) has been restricted by its undesirably high energy loss, especially for those nonhalogenated solvent‐processed ones. Here,a dichloro‐methoxylated terminal group in an asymmetric small molecular acceptor design, which realizes a significantly reduced non‐radiative energy loss (0.179 eV) compared to its symmetric counterpart (0.202 eV), is reported. Consequently, the device efficiency is improved by up to 20% for PM6:BTP‐eC9‐4ClO, without sacrificing the photon harvest or charge transport ability of the control system PM6:BTP‐eC9. Further characterizations reveal the asymmetric acceptor BTP‐eC9‐4ClO's blend film demonstrates a suppressed triplet state formation, enabled by an enhanced electron delocalization. In addition, the asymmetric BTP‐eC9‐4ClO is found to be thermally stabler than BTP‐eC9, and thus providing an improved device stability, whose T80 value reaches > 7800 h under 80 °C anneal in N2 via linear extrapolation. This work represents state‐of‐the‐art device performance for nonhalogenated solvent‐processed binary OSCs with certified results (19.45%).
Giant and Anisotropic Enhancement of Spin‐Charge Conversion in Graphene‐Based Quantum System
Abstract The ever‐increasing demand for efficient data storage and processing has fueled the search for novel memory devices. By exploiting the spin‐to‐charge conversion phenomena, spintronics promises faster and low power solutions alternative to conventional electronics. In this work, a remarkable 34‐fold increase in spin‐to‐charge current conversion is demonstrated when incorporating a 2D epitaxial graphene monolayer between iron and platinum layers by exploring spin‐pumping on‐chip devices. Furthermore, it is found that the spin conversion is also anisotropic. This enhancement and anisotropy is attributed to the asymmetric Rashba contributions driven by an unbalanced spin accumulation at the differently hybridized top and bottom graphene interfaces, as highlighted by ad‐hoc first‐principles theory. The improvement in spin‐to‐charge conversion as well as its anisotropy reveals the importance of interfaces in hybrid 2D‐thin film systems, opening up new possibilities for engineering spin conversion in 2D materials, leading to potential advances in memory, logic applications, or unconventional computing.
People experiencing homelessness face inpatient care disparities
Wrestling with the RAS cancer drug pipeline
An Adaptive Solid‐State Synapse with Bi‐Directional Relaxation for Multimodal Recognition and Spatio‐Temporal Learning
Abstract The brain's unique processing power, such as perception, understanding, and interaction with the multimodal world, is achieved through diverse synaptic functionalities, which include varied temporal responses and adaptation. Although specific functions in brain‐like computing have been successfully realized, emulating multimodal recognition and spatio‐temporal learning remain significant challenges due to the difficulties in achieving multimodal signal processing and adaptive long‐term plasticity in a single electronic synapse. Here, a purely electrically‐modulated ferroelectric tunnel junction (FTJ) memristive synapse which realizes multimodal recognition and spatio‐temporal pattern identification, through the integration of oxygen vacancies migration and ferroelectric polarization switching mechanisms, providing bi‐directional relaxation and adaptive long‐term plasticity simultaneously in the isolated device. The bi‐directional relaxation enables multimodal recognition in the purely electrically‐modulated FTJ device by encoding distinct sensory signals with different electrical polarities. The multimodal perception task is implemented with a multimodal computing system combining visual and speech pattern recognition. Moreover, the adaptive long‐term plasticity allows spatio‐temporal pattern recognition, which is demonstrated by identifying object orientation and direction of motion with a neural network incorporating the arrayed synapses. This work provides a feasible approach for designing bio‐realistic electronic synapses and achieving highly intelligent neuromorphic computing.