Browse Articles

Discover research articles across all indexed journals

Dual Oxidation Suppression in Lead‐Free Perovskites for Low‐Threshold and Long‐Lifespan Lasing

Advanced Materials Yahui Li, Zhenzhu Li, Yanxin Han et al. Apr 01, 2025 DOI: 10.1002/adma.202418931

AbstractLow lasing threshold and long‐term operational stability are essential in advancing cost‐effective, efficient lead‐free (tin) halide perovskite lasers. However, the rapid crystallization of tin perovskites and oxidation of Sn2+ lead to substantial amounts of lattice defects, detrimental to laser performance enhancement. Herein, a dual oxidation suppression strategy is developed to suppress the oxidation of Sn2+ 2D tin halide perovskites, i.e., adopting an oxygen‐free two‐step growth to enhance the crystal quality and incorporating electron‐donating biuret molecules to coordinate with Sn2+ during the crystal growth, which led to the substantial reduction of lasing threshold to <1 µJ cm−2 in (PEA)2MASn2I7. This represents the lowest value in lead‐free perovskite nanolasers and approximately one order of magnitude lower than those previously reported for tin‐based nanolasers. Investigations into the spontaneous photoluminescence (PL) and stimulated lasing emission revealed that 2D tin perovskites exhibited superior photostability and lasing stability compared to their lead counterparts. Specifically, the lasing intensity of (PEA)2MA2Sn3I10 constantly increased by >300% under optical pumping and the lasing threshold decreased by ≈17%, which is not observed in their lead counterparts. The findings highlight the prospect of 2D tin halide perovskites as lead‐free gain materials and cavities for solution‐processed nanolasers with low lasing thresholds and exceptional stability.

Exploring Structure Diversity in Atomic Resolution Microscopy With Graph

Advanced Materials Zheng Luo, Ming Feng, Zijian Gao et al. Apr 01, 2025 DOI: 10.1002/adma.202417478

Abstract The emergence of deep learning (DL) has provided great opportunities for the high‐throughput analysis of atomic‐resolution micrographs. However, the DL models trained by image patches in fixed size generally lack efficiency and flexibility when processing micrographs containing diversified atomic configurations. Herein, inspired by the similarity between the atomic structures and graphs, a few‐shot learning framework based on an equivariant graph neural network (EGNN) to analyze a library of atomic structures (e.g., vacancies, phases, grain boundaries, doping, etc.) is described, showing significantly promoted robustness and three orders of magnitude reduced computing parameters compared to the image‐driven DL models, which is especially evident for those aggregated vacancy lines with flexible lattice distortion. Besides, the intuitiveness of graphs enables quantitative and straightforward extraction of the atomic‐scale structural features in batches, thus statistically unveiling the self‐assembly dynamics of vacancy lines under electron beam irradiation. A versatile model toolkit is established by integrating EGNN sub‐models for single structure recognition to process images involving varied configurations in the form of a task chain, leading to the discovery of novel doping configurations with superior electrocatalytic properties for hydrogen evolution reactions. This work provides a powerful tool to explore structure diversity in a fast, accurate, and intelligent manner.

Lab‐in‐Cell: A Covalent Photosensitizer Reverses Hypoxia and Evokes Ferroptosis and Pyroptosis for Enhanced Anti‐Tumor Immunity

Advanced Materials Bingnan Wang, Guiquan Zhang, Zhizai Chen et al. Apr 01, 2025 DOI: 10.1002/adma.202415673

Abstract Photodynamic immunotherapy presents a non‐invasive strategy characterized by spatiotemporal control and minimal side effects to induce immunogenic cell death (ICD). This approach significantly enhances the release of tumor‐associated antigens and damage‐associated molecular patterns, thereby improving cancer immunotherapy outcomes. However, hypoxia and antioxidant defenses at tumor sites considerably diminish the efficacy of photodynamic immunotherapy. In this work, a covalent warhead, alkyneamide, is introduced into an AIE photosensitizer to develop a novel covalent photosensitizer, MBTP‐PA, which targets redox systems and facilitates ferroptosis‐ and pyroptosis‐mediated photodynamic immunotherapy by thiol‐yne click reactions. The covalent photosensitizer interacts with intracellular thiol compounds such as cysteine and glutathione, disrupting the intracellular antioxidant system and alleviating hypoxia. This results in enhanced photodynamic therapy (PDT) efficacy compared to the non‐covalent photosensitizer MBTP‐A. Furthermore, in conjunction with PDT, this reaction therapy can activate ICD through ferroptosis and pyroptosis, thereby enhancing anti‐tumor immunity. Notably, in vivo injection of MBTP‐PA nanoparticles at the tumor site led to the elimination of primary tumors, inhibiting distal tumors and exhibiting minimal side effects. Therefore, this work not only integrates the thiol‐yne click reactions into cellular systems, significantly enhancing the efficacy of photodynamic immunotherapy but also paves the way for developing novel photosensitizers.

In‐liquid Superspreading Space‐confined Epitaxy on Superamphiphilic Surfaces for Pt(II) Complex Crystalline Film Growth

Advanced Materials Shan Jiang, Yun Xing, Mingyu Ma et al. Apr 01, 2025 DOI: 10.1002/adma.202415811

AbstractSolution‐based method is regarded as a promising approach to fabricate large‐area, high‐quality crystalline films, owing to its low‐cost manufacturing and facile features. However, traditional solution‐based methods still suffer from random simultaneous nucleation and uncontrollable crystal growth which result in polycrystalline films and coffee‐ring effect. Herein, it is proposed that an in‐liquid superspreading space‐confined epitaxy approach on a superamphiphilic surface to fabricate crystalline films with controllable initial nucleation and crystal morphology. With delicate control of the liquid environment, concentration, and superspreading space‐confined solvent film thickness, planar crystalline films with high crystallinity and smooth morphology are obtained. A controllable dewetting crystallization mechanism is proposed, indicating that the diffusion coefficient, regulated by liquid environment, can control the dewetting process during crystallization. With the balance of solvent diffusion and solute precipitation in crystallization, the ordered in‐plane and out‐of‐plane molecular stacking is achieved. And the as‐prepared planar Pt(II) complex crystalline film exhibits multi‐signal sensing ability, which can be further used to fabricate the reaffirmed sensing detector for precise gas sensing in complex and unstable conditions. This study demonstrates a facile approach for crystalline film fabrication with controllable nucleation and morphology in a liquid environment, which holds promising applications in the construction of oxygen or water‐sensitive organic/inorganic devices.

An Integrated Virtual Screening Platform to Identify Potent Co‐Assembled Nanodrugs for Cancer Treatment

Advanced Materials Bo Fang, Fei Pan, Tianyu Shan et al. Apr 01, 2025 DOI: 10.1002/adma.202414154

Abstract Co‐assembled nanodrugs provide significant advantages in cancer treatment and drug delivery, yet effective screening methods to identify molecular combinations for co‐assembly are lacking. This study presents a screening strategy integrating ligand‐based virtual screening (LBVS) and density functional theory (DFT) calculations to explore new molecular combinations with co‐assembly capabilities. The accuracy of this screening was validated by synthesizing various co‐assembled nanodrugs under mild conditions. Vinpocetine (Vin) and lenvatinib (Len) are representative co‐assembly combinations that can directly co‐assemble into nanoparticles (NPs) through hydrogen bonding, van der Waals forces, and π‐π interactions. These NPs were further functionalized with polyethylene glycol (PEG), resulting in PEG‐L/V NPs that exhibited enhanced stability and biocompatibility. In addition, PEG‐L/V NPs can respond to acidic conditions and release Vin and Len, working synergistically to induce cell cycle arrest and apoptosis in tumor cells in vitro while also inhibiting xenograft tumor growth in vivo. RNA sequencing (RNA‐seq) analysis revealed that the co‐assembled nanodrugs exhibited mechanisms that are distinct from those of single drugs. This study demonstrates the feasibility of utilizing a computational approach combining LBVS and DFT to identify small molecules with co‐assembly capabilities, leading to innovative anticancer strategies.

Correction to Supporting Information for Struve et al., Systematic changes in circumpolar dust transport to the Subantarctic Pacific Ocean over the last two glacial cycles

Proceedings of the National Academy of Sciences Apr 01, 2025 DOI: 10.1073/pnas.2504158122

Ultra‐Flexible Pixelated Perovskite Photodetectors Enabled by Honeycomb Polymer Grids for High‐Resolution Imaging

Advanced Materials Ding Zheng, Zhaoqian Xie, Wei Huang et al. Apr 01, 2025 DOI: 10.1002/adma.202415068

AbstractA nature‐inspired fabrication method based on a photolithography‐free flexible polymer grid is reported for high‐resolution pixelation of perovskite photodiode arrays with exceptional mechanical ductility and a morphology resembling that of natural compound eyes. The resulting pixelated perovskite photosensitive layer has a ≈1 µm pixel size with 2000 Pixels per inch (PPI) resolution when fully assembled as a photodetector array, delivering a detectivity of >1013 Jones while providing cross‐talk free imaging. Using a polymer grid effectively releases stress on the perovskite platform, greatly increasing the mechanical agility of the otherwise brittle perovskite film. This novel fabrication methodology and device design offer new possibilities for applications in robotics, biomedical imaging, and virtual and augmented reality.

Strong Proquinoidal Acceptor Enables High‐Performance Ambipolar Organic Electrochemical Transistors

Advanced Materials Xiran Pan, Zhibo Ren, Yiheng Chen et al. Apr 01, 2025 DOI: 10.1002/adma.202417146

Abstract Ambipolar organic electrochemical transistors (OECTs) can simplify manufacturing processes and reduce device footprints, yet their performance still lags behind their p‐type and n‐type counterparts due to limited molecular design strategies. Here, incorporating strong proquinoidal building blocks effectively addresses this challenge is demonstrated. Using a computational acceptor screening approach, three TBDOPV‐based polymers are designed and synthesized: P(bgTBDOPV‐T), P(bgTBDOPV‐EDOT), and P(bgTBDOPV‐MeOT2), all exhibiting ambipolar behavior across various donor moieties. Remarkably, P(bgTBDOPV‐EDOT) achieves record‐high figure‐of‐merit ( µC *) values, reaching 268 F cm −1  V −1  s −1 for p‐type and 107 F cm −1  V −1  s −1 for n‐type operations. Additionally, P(bgTBDOPV‐EDOT) exhibits low operation voltages ( V Th,p  = −0.55 V and V Th,n  = 0.32 V), with fast response times ( τ on / τ off = 0.48/0.36 ms for p‐type and 0.41/0.41 ms for n‐type) and enhanced operational stability. Inverter devices based on P(bgTBDOPV‐EDOT) show high voltage gains of 173 V/V. Theoretical calculations and data analysis confirm that strong proquinoidal acceptors significantly enhance the delocalization of both positive and negative polarons, offering an effective pathway for higher‐performance ambipolar OECT materials.

Reply to Deter-Wolf et al.: Laser-stimulated fluorescence of Chancay tattoos

Proceedings of the National Academy of Sciences Thomas G. Kaye, Judyta Bąk, Henry William Marcelo et al. Apr 01, 2025 DOI: 10.1073/pnas.2501912122

A Polymeric mRNA Vaccine Featuring Enhanced Site‐Specific mRNA Delivery and Inherent STING‐Stimulating Performance for Tumor Immunotherapy

Advanced Materials Xiaoya Guo, Zhiyu Yang, Zhaopei Guo et al. Apr 01, 2025 DOI: 10.1002/adma.202410998

AbstractThe development of mRNA delivery carriers with innate immune stimulation functions has emerged as a focal point in the field of mRNA vaccines. Nonetheless, the expression of mRNA in specific sites and innate immune stimulation at specific sites are prerequisites for ensuring the safety of mRNA vaccines. Based on the synthetic PEIRs carriers library, this study identifies an innovative mRNA delivery carrier named POctS with the following characteristics: 1) simultaneously possessing high mRNA delivery efficiency and stimulator of interferon genes (STING) stimulation function. 2) Leveraging the distinctive site‐specific delivery capabilities of POctS, the expression of mRNA at specific sites and the activation of innate immune responses at designated sites are achieved, minimizing formulation toxicity and maximizing the vaccine performance. 3) Tailoring two types of mRNA vaccines based on POctS according to the immune infiltration status of different types of tumors. Briefly, POctS‐loading ovalbumin (OVA) mRNA as a tumor antigen vaccine achieves the prevention and treatment of melanoma in mice. Further, POctS‐loading mixed lineage kinase domain‐like protein (MLKL) mRNA as an in situ tumor vaccine effectively treats orthotopic pancreatic cancer in mice. This delivery carrier offers a feasible mRNA vaccine‐based immunotherapy strategy for various types of tumors.

Self‐Adaptive Polarized Photoresponse in Organic Single‐Crystal Phototransistors for Bionic Night‐Time Polarization Perception

Advanced Materials Jing Pan, Shuai Chen, Shuang Chen et al. Apr 01, 2025 DOI: 10.1002/adma.202415530

AbstractThe emerging semiconductor micro/nanocrystals with intrinsic anisotropy have provided new perspectives for low‐cost and simplified polarimetry. However, the low polarization sensitivity of state‐of‐the‐art polarimeters based on anisotropic semiconductors under weak and partially polarized light severely hinders their practical application in complex dim environments. Here, a photo‐adaptive polarization‐sensitive organic phototransistor (POL‐OPT) is demonstrated for bionic weak‐light polarization perception. The combination of highly anisotropic organic crystals with charge‐storage accumulative effect enables a self‐adaptive polarized photoresponse of the phototransistor to imitate the bionic scotopic adaptation process. Consequently, an ultrahigh dichroic ratio (DR) of over 105 is achieved through time accumulation under an ultraweak light intensity of 200 nW cm−2, which is among the highest in polarization‐sensitive photodetectors. Furthermore, POL‐OPT array is constructed for effective polarization perception in an artificial moonlit environment with a low degree of linear polarization (DoLP) down to 0.26, reaching the detection threshold of night‐active dung beetles. This study offers a new opportunity for the development of new‐generation high‐performance polarimeters for polarization imaging, bionic navigation, and artificial visual systems.

Laser imaging of ancient tattoos: New tools illuminate established knowledge

Proceedings of the National Academy of Sciences Aaron Deter-Wolf, Benoît Robitaille, Lars Krutak Apr 01, 2025 DOI: 10.1073/pnas.2501049122

High Cell to Module Efficiency Remaining Ratio of ≈90% for the 100 cm<sup>2</sup> Fully Roll‐to‐Roll Gravure Printed Flexible Organic Solar Cells From Non‐Halogenated Solvent

Advanced Materials Shutao Yang, Xingze Chen, Yaqin Pan et al. Apr 01, 2025 DOI: 10.1002/adma.202500115

AbstractThe cell‐to‐module (CTM) efficiency remaining ratio from monolithic device to large‐area module indicates the scalability potential for large‐area organic solar cells (OSCs). Nowadays, the CTM value is still low as the area increases to larger than 100 cm2. In this work, the crucial role of solvent in CTM for printing, which on one side influenced the large area homogeneity due to the ink rheology property, and on the other side impacted phase separation dynamics because of vaporization and crystalline rate is highlighted. The films from TMB show excessive pure phase and printing line defects in vertical the printing direction due to slow volatilization speed and low adhesion, while Tol‐based films present printing line defects along the printing direction due to large surface adhesion are demonstrated. In contrast, the films from non‐halogenated solvent, o‐XY exhibited a suitable phase separation size and excellent large‐area homogeneity. Consequently, the fully printed 1 cm2 FOSCs exhibit an efficiency of 14.81%. Moreover, the FOSCs module with an area of 28–104 cm2 gives an efficiency of over 13%, with a CTM of 0.9. Selecting suitable non‐halogenated solvents to achieve large‐area uniformity and appropriate phase separation morphology in &gt;100 cm2 modules is of great importance for the industrialization of FOSCs.

Biomimetic rhCOL17‐P334 Conjugate for Enhanced Wound Healing

Advanced Materials Yijie Lou, Chunyan Dai, Shuting Feng et al. Apr 01, 2025 DOI: 10.1002/adma.202417980

Abstract Wound healing remains a significant global health challenge, affecting millions annually and imposing substantial economic burdens. Most commercially available biomaterials for wound management primarily address external symptoms, including hemostasis, exudation, scarring, and infection. Advanced biomaterials derived from endogenous molecules aim to better replicate the native wound microenvironment, promoting enhanced repair. Since wounds frequently occur on exposed skin, which is vulnerable to UVA radiation and requires protective yet invisible materials, traditional wound care products often lack these essential features. Inspired by natural UV protection mechanisms, a novel bioscaffold is developed using recombinant human collagen XVII (rhCOL17) crosslinked with porphyra‐334 (P334) to improve wound healing under UVA exposure. The resulting rhCOL17‐P334 conjugate integrates extracellular matrix (ECM)‐like cues with UVA‐shielding properties provided by P334. This conjugate is used to construct a transparent, injectable hydrogel combining gelatin methacryloyl (GelMA) and rhCOL17‐P334 (GCP). GCP significantly inhibits UVA‐induced fibroblast senescence and improves wound healing outcomes by targeting integrin α6β4 through rhCOL17. Its transparency facilitates convenient wound monitoring while also addressing the aesthetic requirement for invisibility. By combining UVA shielding with wound repair capabilities, GCP presents a promising platform for advanced wound management.

The Critical Role of Atomic‐Scale Polarization in Transition Metal Oxides on Vanadium‐Redox Electrochemistry

Advanced Materials Xiangyang Zhang, Kelong Ao, Jihong Shi et al. Apr 01, 2025 DOI: 10.1002/adma.202420510

Abstract Transition metal oxide electrocatalysts (TMOEs) are poised to revive grid‐scale all‐vanadium redox flow batteries (VRFBs) due to their low‐cost and unique electronic properties, while often inescapably harboring surface vacancies. The role of local vacancy‐induced physicochemical properties on vanadium‐redox electrochemistry (VRE), encompassing kinetics, and stability, remains profoundly unveiled. Herein, for the first time, it is revealed that vacancies induce atomic‐scale polarization in TMOEs and elucidate its mechanism in VRE. Attributable to local polarization, particularly by cation vacancy, the activated nearest‐coordinated Mn sites prominently augment the adsorption competence of the V 2+ /V 3+ couple and expedite its round‐tripping by forming an intermediate *Mn–O–V bridge. It is also affirmed that the anion vacancies are vulnerable to microstructure reconfiguration by feeble hydroxyl adsorption and thus performance degradation over long‐term cycling, in contrast to cation vacancies. Accordingly, the VRFB employing cation‐vacancy‐functionalized electrode delivers an energy efficiency of 80.8% and a reliable 1000‐cycle lifespan with a negligible decay of 0.57% per cycle at 300 mA cm −2 , outclassing others. The findings shed light on the fundamental rules governing the utility and evolution of vacancies in TMOEs, thereby moving a step closer toward their deployment in a wide range of sustainable energy storage schemes.

Electromagnetically Heating and Oscillating Liquid Metal for Catalyzing Polyester Depolymerization

Advanced Materials Zhuanzhuan Zhai, Chao Li, Ting Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202502011

Abstract Depolymerization and recycling of polyesters have shown great significance to economy, ecology, carbon neutrality and human health. Efficient catalysts for thermolysis depolymerization have long been pursued to achieve rapid depolymerization, high selectivity, and low energy consumption. In this study, it is found that liquid metal (LM) can serve as the efficient self‐heater, mechanic disturber and catalyst for thermolysis depolymerization of polyesters under alternating electromagnetic fields. When dissolving different metals (e.g., Sn, Zn, Al, and Mg) into gallium, LMs may provide dynamic interactions between the catalyst and reactants, spontaneous metal enriching, and oxidation within the LM surface layer. Without any conventional heaters and mechanic shakers, polycaprolactone is catalytically depolymerized into ɛ‐caprolactone at the rate of ≈700 mg h −1 mL −1 with the selectivity of 95.5%. The high surface tension and high mobility of LM also enable continuous depolymerization at an appropriate feeding speed of polyesters (including polyethylene terephthalate, polyhydroxybutyrate and polylactic acid). Thus, this study may offer an unprecedented “all‐in‐one” platform of liquid metal for continuous thermolysis depolymerization of polyesters, while without any requirement of external heater, mixer, and catalysts.

High‐Entropy 1T‐Phase Quantum Sheets of Transition‐Metal Disulfides

Advanced Materials Haiyang Wang, Yu Shi, Ming Li et al. Apr 01, 2025 DOI: 10.1002/adma.202500321

AbstractQuantum sheets of transition‐metal dichalcogenides (TMDs) are promising nanomaterials owing to the combination of both 2D nanosheets and quantum dots with distinctive properties. However, the quantum sheets usually possess semiconducting behavior associated with 2H phase, it remains challenging to produce 1T‐phase quantum sheets due to the easy sliding of the basal plane susceptible to the small lateral sizes. Here, an efficient high‐entropy strategy is developed to produce 1T‐phase quantum sheets of transition‐metal disulfides based on controllable introduction of multiple metal atoms with large size differences to retard the sliding of basal plane. The key is the topological conversion of in‐plane ordered carbide laminates (i‐MAX) compatible with multiple atoms to high‐entropy transition‐metal disulfides with high strains and 1T phase, which facilely triggers the fracture into 1T‐phase quantum sheets with average size of 4.5 nm and thickness of 0.7 nm during the exfoliation process. Thus, the 1T‐phase disulfide quantum sheets show high electrocatalytic activities for lithium polysulfides, achieving a good rate performance of 744 mAh g−1 at 5 C and a long cycle stability in lithium‐sulfur batteries.

Reply to Wang: Improving large language model approaches for identifying social determinants of health from clinical notes

Proceedings of the National Academy of Sciences Rodney A. Gabriel Apr 01, 2025 DOI: 10.1073/pnas.2503187122

Integrating Strong Luminescence and High Mobility in Organic Single Crystals of Covalent Pyrene Dimers

Advanced Materials Haichao Liu, Zhichen Xu, Jing Zhang et al. Apr 01, 2025 DOI: 10.1002/adma.202419981

AbstractSimultaneously achieving strong luminescence and high mobility in organic semiconductors remains a challenge. Herein, two covalently dimerized pyrene derivatives (1Py‐2Py and 1Py‐1Py) with distinct chemical linkages and crystal packing arrangements are presented. Remarkably, the radiative transition of pyrene is gradually unforbidden from 1Py‐2Py to 1Py‐1Py. Moreover, 1Py‐2Py showcases 1D long‐range π─π stacking, while 1Py‐1Py exhibits 2D herringbone packing formed by a vast network of intermolecular C─H∙∙∙π interactions. To the surprise, both high photoluminescence quantum yield (PLQY = 72.17%) and high hole mobility (µ = 32.6 cm2 V−1 s−1) are simultaneously harvested in 1Py‐1Py crystal, which are far superior to those in 1Py‐2Py crystal (PLQY = 48.66% and µ = 0.05 cm2 V−1 s−1). These findings underscore the potential of covalent pyrene dimer with 1‐position linkages as a promising organic semiconductor for the exceptional combination of strong luminescence and high mobility, which is substantially ascribed to the efficiently unforbidden emission and the favorable 2D charge transport pathways.

Mechanosensitive and pH‐Gated Butterfly‐Shaped Artificial Ion Channel for High‐Selective K <sup>+</sup> Transport and Cancer Cell Apoptosis

Advanced Materials Yaqi Wu, Qiangqiang Xu, Yaoxuan Chen et al. Apr 01, 2025 DOI: 10.1002/adma.202416852

Abstract To advance the exploration of mechanisms underlying natural multi‐gated ion channels, a novel butterfly‐shaped biomimetic K + channel GnC7 (n = 3, 4) is developed with dual mechanical and pH responsiveness, exhibiting unprecedented K + /Na + selectivity ( G3C7 : 34.4; G4C7 : 41.3). These channels constructed from poly(propylene imine) dendrimer and benzo‐21‐crown‐7‐ethers achieve high K + transport activity (EC 50 : 0.72 µ m for G3C7 ; 0.9 µ m for G4C7 ) due to their arc‐like mechanical rotation. The dynamic mode relies on butterfly‐shaped topology derived from the highly symmetrical core and multiple intramolecular hydrogen bonds. GnC7 can sense mechanical stimulus applied to liposomes/cells and then adapt the K + transport rate accordingly. Furthermore, reversible ON/OFF switching of K + transport is realized through the pH‐controllable host‐guest complexation. G4C7 ‐induced ultrafast cellular K + efflux (70% within only 9 min) efficiently triggers mitochondrial‐dependent apoptosis of cancer cells by provoking endoplasmic reticulum stress accompanied by drastic Ca 2+ sparks. This work embodies a multi‐dimensional regulation of channel functions; it will provide insights into the dynamic behaviors of biological analogs and promote the innovative design of artificial ion channels and therapeutic agents.