Browse Articles

Discover research articles across all indexed journals

Rolling the Dice with Light Competition: Introducing a True Random Number Generator Powered by Photo‐Induced Polarity Current

Advanced Materials Taehyun Park, Juhyung Seo, Namju Kim et al. Apr 01, 2025 DOI: 10.1002/adma.202419579

AbstractThe pursuit of hardware‐based security solutions has highlighted the true random number generator (TRNG). Various physical phenomena, from noise generation to quantum physics complexities, have been explored for random number generation. The arc discharge light‐induced TRNG (ALTRNG) is introduced, featuring wavelength‐dependent photocurrent generation and arc discharge irradiation. A bipolar photo‐responsive photodetector (BPPD) differentiates “1” and “0” states, producing highly random bits validated by the National Institute of Standards and Technology (NIST) 15 tests. The BPPD's response to deep‐ultraviolet (DUV) and blue light enables distinct photocurrent generation under arc discharge illumination. The ALTRNG generates true random signals, yielding bit streams with unpredictability, uniform distribution, and stability. With a readout circuit achieving 2‐kbps, wireless random number transmission is demonstrated, highlighting potential for secure password systems and artificial X‐ray image generation.

Oriented Assembly of 2D Metal‐Pyridylporphyrinic Framework to Regulate the Redox Kinetics in Li−S Batteries

Advanced Materials Yan Zhao, Ziyun Shang, Muti Feng et al. Apr 01, 2025 DOI: 10.1002/adma.202501869

AbstractDeveloping the highly efficient catalysts is a great challenge for accelerating the redox reactions in Li−S batteries. Inspired by the single‐atom catalysts and metalloproteins, it makes full use of the advantages of metal–organic frameworks (MOFs) as electrocatalysts. Herein, a series of 2D metal‐bonded metalloporphyrin MOFs are prepared with 5,10,15,20‐tetrakis(4‐pyridyl) cobalt porphyrin (CoTPyP) as building blocks and transition metals (M═Mn, Fe, Co, Ni, and Cu) as nodes, respectively. The crystalline structures of the bimetallic 2D MOFs are confirmed by UV–vis spectra and X‐ray diffraction analyses. According to DFT calculation, the peripheral metal nodes optimize the electronic state of Co in porphyrin core. Especially, CoTPyP‐Mn facilitates the cleavage of S−S bond from both ends and promotes their conversion kinetics through Co−S and Li−N bonds. The Li−S cells with CoTPyP‐Mn show the initial specific capacity of 1339 mA h g−1 at 0.2 C. The capacity decay rate is only 0.0442% per cycle after 1000 cycles at 2 C. This work achieves the rational control of the central Co d electron state through the peripheral regulation and enriches the application of MOFs in accelerating the redox kinetics in Li−S batteries.

Biplane Ion‐Pairing Induced Supramolecular Assembly for High‐Performance Uranium Detection

Advanced Materials Zhen Su, Lixin Zhang, Huiqing Zhang et al. Apr 01, 2025 DOI: 10.1002/adma.202418952

AbstractIt is still challenging to directly recognize the anionic species [UO2(CO3)3]4−, the dominant species in the environment (82%‐93%), using current optical probes because of the adverse effects of its thick hydration shell on binding interactions. In this study, a water‐soluble Pt(II) methylated terpyridine complex ([Pt(CH3‐tpy)NCO]+) supramolecular probe is designed to directly target [UO2(CO3)3]4− by a new strategy of thick hydration shell overlapping arrangement. The optical response demonstrates excellent selectivity among ≈30 investigated interfering substances, along with rapid response (≈15 s), high sensitivity (64.1 nm) and dual‐signals. It is confirmed both experimentally and theoretically that the superior detection performance is attributed to the formation of a unique supramolecular structure featuring biplane‐like building block, bicolumnar stacking and water‐bridged anionic networks, via the overlap of thick hydration shells of aligned [UO2(CO3)3]4− to boost a superentropic driving force, and the distinguishable dual‐signals arises from the emergence of four types of Pt‐Pt interactions, generating low‐energy metal‐to‐metal charge transfer adsorption/emission. In addition, a [Pt(CH3‐tpy)NCO]+‐based hydrogel platform is constructed for detecting both anionic and cationic uranium, with a detection limit of 14.89 fg. This work unlocks not only a way to directly detect [UO2(CO3)3]4−, but also a new idea for sensing ions with extreme thick hydration layers.

Conjugated Coordination Polymer Aerogels with Increased Accessibility of Well‐Defined Single‐Atom Metal Sites as a New Paradigm of Electrocatalysts

Advanced Materials Ziwei Ma, Shuting Zhan, Yufeng Xie et al. Apr 01, 2025 DOI: 10.1002/adma.202420565

Abstract Developing high‐performance single‐atom catalysts (SACs) with maximum metal utilization efficiency is of significance, which presents enormous potentials to be extensively applied. It is desired yet challenging to elaborately tailor the coordination structures of active sites in SACs and simultaneously enable sufficient accessibility of these active sites to reactants. Here, a facile and general strategy to prepare conjugated coordination polymer aerogels (CCPA) with porous architectures that can markedly increase the accessibility of their elaborately‐tailored active sites, which as a new electrocatalyst paradigm can fully present both the structural advantages of SACs and aerogel materials, is reported. Taking nickel (Ni) as an example, Ni‐based CCPA (Ni‐CCPA) and its counterpart Ni‐CCP with non‐aerogel feature are studied as a proof‐of‐concept case. Electrochemical measurements show that, relative to Ni‐CCP, Ni‐CCPA exhibits appreciably higher performance toward alkaline oxygen evolution reaction (OER). Both the experimental results and theoretical simulations unravel that the improved OER performance of Ni‐CCPA arises from the accelerated OH − diffusion within its porous architecture and enhanced OH − concentration near its highly exposed active sites at its high‐curvature surfaces with localized electric fields. Importantly, as evidenced by the Cu‐CCPA and Zn‐CCPA examples, such strategy can be promisingly applied to prepare high‐performance CCPA targeted toward various catalytic reactions and beyond.

Single‐Atom Enables Reverse Hydrogen Spillover for High‐Performance Protonic Ceramic Fuel Cells

Advanced Materials Sunce Zhao, Wenjia Ma, Beibei He et al. Apr 01, 2025 DOI: 10.1002/adma.202501387

Abstract Protonic ceramic fuel cells (PCFCs) offer a promising avenue for sustainable energy conversion, however, their commercial potential is hindered by sluggish proton‐involved oxygen reduction reaction (P‐ORR) kinetics and inadequate durability of cathode materials. Here, a novel single‐atom Ru anchor on BaCe 0.125 Fe 0.875 O 3−δ (BCF) perovskite, synthesized by a facile and scalable solid‐state approach, as a potential cathode for PCFCs is reported. Theoretical and experimental analyses demonstrate that the single‐atom Ru on BCF, characterized by a unique 4‐coordinate Ru‐O‐Fe configuration, not only induces reverse hydrogen spillover but also acts as an active site for P‐ORR. The application of the optimized 2Ru‐BCF (2 wt.% Ru) cathode in a single cell delivers an exceptional peak power density of 1.78 W cm −2 at 700 °C, along with excellent operational stability over 200 h. These findings provide new insights into single‐atom engineering, advancing the commercial viability of PCFCs.

Mitochondrion‐Targeted Type I Photodynamic Therapy for Agonist Independent cGAS‐STING Activation

Advanced Materials Yin Xu, Daokuan An, Tian Zhang et al. Apr 01, 2025 DOI: 10.1002/adma.202418894

AbstractCGAS‐STING agonists generally lead to hyperimmunity and systemic toxicity, hindering their immunotherapeutic outcomes. Herein, a mitochondrion‐targeted nanoagonist (termed HABH) containing boron dipyrromethene (BODIPY)‐derived type I photosensitizer (BDP) and Au nanoparticle‐engineered hollow mesoporous silica (HMSN/AuNPs) has been fabricated for light‐controlled mitochondrial stress‐inducing and agonist‐independent cGAS‐STING pathway activation. The HABH nanoagonist can actively target tumor tissues and release the mitochondrion‐targeted BDP. Under light illumination, BDP achieves type I photodynamic therapy (PDT) in mitochondria, generating massive hydroxyl radicals (•OH) and inducing mitochondrial stress in an oxygen‐independent manner, promoting the release of mitochondrial DNA (mtDNA). Simultaneously, the HMSN/AuNPs act as dual nanozymes to derive cascade reactions for •OH production, elevating the intracellular oxidative state, and together with the BDP‐induced mitochondrial stress, finally evoking the cGAS‐STING pathway and facilitating the release of type I interferon. In the orthotopic breast tumor models, the HABH nanoagonist achieved intratumoral and systemic immunoactivation for eradicating primary tumors and preventing metastasis tumors. Therefore, the constructed mitochondrion‐targeted nanoagonist enabled light‐controlled and agonist‐independent cGAS‐STING activation, providing a paradigm for photoimmunotherapy.

Simultaneous Isotropic Omnidirectional Hypersensitive Strain Sensing and Deep Learning‐Assisted Direction Recognition in a Biomimetic Stretchable Device

Advanced Materials Muzi Xu, Jiaqi Zhang, Chaoqun Dong et al. Apr 01, 2025 DOI: 10.1002/adma.202420322

AbstractOmnidirectional strain sensing and direction recognition ability are features of the human tactile sense, essential to address the intricate and dynamic requirements of real‐world applications. Most of the current strain sensors work by converting uniaxial strain into electrical signals, which restricts their use in environments with multiaxial strain. Here, the first device with simultaneous isotropic omnidirectional hypersensitive strain sensing and direction recognition (IOHSDR) capabilities is introduced. By mimicking the human fingers from three dimensions, the IOHSDR device realizes a novel heterogeneous substrate that incorporates the involute of a circle, resulting in isotropic behavior in the radial direction and anisotropic property in the involute direction for hypersensitive strain sensing. With the assistance of a deep learning‐based model, the IOHSDR device accomplishes an impressive accuracy of 99.58% in recognizing 360° stretching directions. Additionally, it exhibits superior performance in the typical properties of stretchable strain sensors, with a gauge factor of 634.12, an ultralow detection limit of 0.01%, and outstanding durability exceeding 15 000 cycles. The demonstration of radial artery pulse and throat vibration applications highlights the IOHSDR's unique characteristics of isotropic omnidirectional sensing and precise direction detection unleashing new classes of wearable health monitoring devices.

CERN releases detailed plans for supercollider — but no hints about funding

Nature Davide Castelvecchi Apr 01, 2025 DOI: 10.1038/d41586-025-01018-x

A 2D/3D Heterostructure Perovskite Solar Cell with a Phase‐Pure and Pristine 2D Layer

Advanced Materials Meng‐Chen Shih, Shaun Tan, Yongli Lu et al. Apr 01, 2025 DOI: 10.1002/adma.202416672

AbstractInterface engineering plays a critical role in advancing the performance of perovskite solar cells. As such, 2D/3D perovskite heterostructures are of particular interest due to their optoelectrical properties and their further potential improvements. However, for conventional solution‐processed 2D perovskites grown on an underlying 3D perovskite, the reaction stoichiometry is normally unbalanced with excess precursors. Moreover, the formed 2D perovskite is impure, leading to unfavorable energy band alignment at the interface. Here a simple method is presented that solves both issues simultaneously. The 2D formation reaction is taken first to completion, fully consuming excess PbI2. Then, isopropanol is utilized to remove excess organic ligands, control the 2D perovskite thickness, and obtain a phase‐pure, n = 2, 2D perovskite. The outcome is a pristine (without residual 2D precursors) and phase‐pure 2D perovskite heterostructure with improved surface passivation and charge carrier extraction compared to the conventional solution process. PSCs incorporating this treatment demonstrate a notable improvement in both stability and power conversion efficiency, with negligible hysteresis, compared to the conventional process.

Kinetics Manipulation Enabled by Solubility Control Toward 19% Organic Solar Cells via Compatible Air Coating

Advanced Materials Yongwen Lang, Ying Zhang, Hao Xia et al. Apr 01, 2025 DOI: 10.1002/adma.202420096

AbstractBlade coating is a promising tool for upscaling organic solar cells (OSCs). However, the performances of blade‐coated OSCs still lag behind their spin‐coated counterparts, limiting their competitive edge towards commercialization. One of the main reasons is that controlling the film aggregation kinetics and morphology becomes challenging during the transition from spin coating to blade coating, especially when using high boiling point solvents, which can result in excessive aggregation. Therefore, a deeper understanding and appraisal of film formation kinetics influenced by coating methods is crucial. In this work, it is demonstrated that ink solubility tuning by incorporating a twisted third component (BTP‐4Cl) can induce rapid crystallization behavior and promote fine phase separation between the donor polymer (PM6) and the acceptor (BTP‐eC9) in blade coating. As a result, a high power conversion efficiency (PCE) of 19.67% is obtained in OSCs (0.04 cm2), one of the state‐of‐the‐art efficiencies among the reported blade‐coated OSCs (19.76% for the spin‐coated devices). In addition, it is found that the inhibited phase aggregation contributes to enhancing the light stability of the device. This strategy offered novel insights into the effectiveness of solubility‐tuning approaches for achieving highly efficient and stable OSCs under open‐air coating conditions.

Constructing Biomimetic Nanochannels for High‐Capacity Capture of Uranyl Tricarbonate Complex Ions

Advanced Materials Doudou Cao, Fengchao Cui, Cheng Zhang et al. Apr 01, 2025 DOI: 10.1002/adma.202500567

Abstract Biomimetic nanochannels enable fast and selective transport of mononuclear metal ions; however, their construction for complex ion transport remains in its infancy due to the nonuniform charge distribution and large geometric dimensions of coordination compounds. Herein, an ionic electrostatic interaction template strategy is proposed to prepare biomimetic channels for the capture of complex ions. Using the [UO 2 (CO 3 ) 3 ] 4− ion as a template, various quaternary ammonium monomers with lengths of 6.2−8.4 Å are decorated on 1D porous channels of the TpBDOH framework via the Williamson ether reaction. Accordingly, the pore size is modulated in the sub‐nanometer range of 9−13 Å, facilitating multiple electrostatic attractions between quaternary ammonium fragments and the three equatorial carbonate ions on the [UO 2 (CO 3 ) 3 ] 4− ion. The unique structure enabled highly efficient uranium adsorption with a capacity of 501.5 mg g −1 and a high selectivity coefficient for uranium over vanadium of >163.1. The resulting electropositive nanochannels selectively captured [UO 2 (CO 3 ) 3 ] 4− ions from natural seawater, achieving a high uptake of 25.3 mg g −1 in 35 days.

Directly Printed 3D Soft Microwave Plasmonic Enhanced‐Q Resonators by Decoupling from Lossy Media

Advanced Materials Hoon Yeub Jeong, Jonghyun Jeong, Jun‐Chan Choi et al. Apr 01, 2025 DOI: 10.1002/adma.202418182

Abstract Soft electronic components are essential building blocks for realizing form‐factor‐free applications; however, most designs are confined to 2D or 2.5D structures due to challenges in maintaining 3D structural integrity. This limitation is particularly critical for electromagnetic devices, such as resonators, where dielectric losses from elastomeric substrates severely hinder high‐performance functionality. Here, directly printed 3D electromagnetic soft plasmonic enhanced‐quality(Q) factor resonators are proposed, using highly conductive composites. By incorporating an immiscible solvent into an elastomer matrix, emulsion phases are formed that significantly enhance the storage modulus, enabling the fabrication of 3D‐printed structures while improving their electrical conductivity. 3D microwave plasmonic resonators with a high degree of design freedom, such as pillars and hooks are demonstrated. These structures exhibit improved resistance to dielectric interference by leveraging the resonance in lossless air. Moreover, integrating a coplanar ground plane further decouples the resonators from lossy substrates, resulting in a 3.4‐fold enhancement in the Q‐factor (octupole mode) compared to 2D resonators. This improvement enables stable operation on high‐permittivity surfaces, such as human skin. Additionally, a single 3D resonator demonstrates wireless deformation‐sensing capabilities, facilitating the simultaneous detection of strain amplitude and orientation. This result can pave the way for advanced sensing applications in soft electronics.

Muscle‐Inspired Self‐Growing Anisotropic Hydrogels with Mechanical Training‐Promoting Mechanical Properties

Advanced Materials Yulong Xia, Xiaozhuang Zhou, Zhenzhen Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202416744

AbstractMuscles are highly anisotropic, force‐bearing issues. They form via a process involving nutrient absorption for matrix growth and mechanical training for matrix toughening, in which cyclic disassembly‐reconstruction of muscle fibers plays a critical role in generating strong anisotropic structures. Inspired by this process, a mechanical training‐associated growing strategy is developed for preparing tough anisotropic hydrogels. Using anisotropic hydrogels made from polyvinyl alcohol (PVA)/tannic acid (TA) as an example, it is demonstrated that the hydrogels can absorb poly(ethylene glycol) diacrylate (PEGDA) via disassembling their aligned nanofibrillar structures. Incorporation of PEGDA within the hydrogels induces PVA to form crystal domains while subsequent mechanical training can restore the aligned fibrillar structures. Such a combining process results in expansion in materials’ size (≈2 times) and significant enhancement in their mechanical properties (Young's modulus: from 2.4 to 2.85 MPa; ultimate tensile strength: from 8.2 to 14.1 MPa; toughness: from 335 to 465 MJ m−3). With a high energy dissipation efficiency (≈90%), potential applications for these tough and adaptable hydrogels are envisioned in impact‐protective materials, surgical sutures, etc.

A Universal Solution for Direct Regeneration of Spent Lithium Iron Phosphate

Advanced Materials Jie Tang, Haotian Qu, Chongbo Sun et al. Apr 01, 2025 DOI: 10.1002/adma.202420238

AbstractLithiation reactions driven by chemical potential offer a promising avenue for directly regenerating degraded lithium iron phosphate (LFP). However, the choice of solution system significantly influences the lithium supplementation where improper selection may result in poor lithium recovery or extremely slow kinetics. Herein, it is identified that the most critical factor affecting solution repair effectiveness is the redox potential of the anions in the solution, which determines whether spent LFP (SLFP) can undergo spontaneous lithiation under ambient conditions. Then, machine learning (ML) is used for prediction and screening of huge potential solution systems, and finally a general strategy is proposed: creating a low redox potential solution system that incorporates anions with either low redox potential or moderate redox potential at high concentrations. As a demonstration, the regenerated LFP by ascorbic acid and LiOH solution systems exhibits a high discharge capacity of 144 mAh g−1 at 1 C, retaining 96% of its capacity after 500 cycles at 5 C. This work establishes an important criteria for designing solution systems to restore degraded LFP, marking a significant advancement in the direct regeneration of cathode materials from spent lithium‐ion batteries (LIBs).

Large language models for identifying social determinants of health

Proceedings of the National Academy of Sciences Yu Wang Apr 01, 2025 DOI: 10.1073/pnas.2501506122

Daily briefing: Mass layoffs across US health agencies

Nature Flora Graham Apr 01, 2025 DOI: 10.1038/d41586-025-01024-z

All‐Silicon Broadband Infrared Photodetectors With In‐Plane Photon Trapping Structures

Advanced Materials Ke Deng, Jiaxiang Guo, Kun Zhang et al. Apr 01, 2025 DOI: 10.1002/adma.202419382

Abstract Silicon (Si) photonics has been widely explored for many various applications, including optical communication, optoelectronic computing, spectroscopy, and image sensing. As a key component for optoelectronic signal conversion in these applications, Si‐based infrared photodetectors have attracted extensive attention. However, achieving all‐Si on‐chip photodetection in the very long‐wavelength infrared (VLWIR) range remains challenging, with broadband enhancement and improved operating temperature being pressing issues that need to be addressed. An all‐Si photodetector design is presented using in‐plane photon trapping structures (IPTS) to enhance detection efficiency and improve the operating temperature of the photodetector at the VLWIR range. The photodetector achieves a broadband enhancement of 285–575% (across 12–19 µm) and a 31% reduction in dark current. Additionally, it exhibits an impressive peak specific detectivity of 1.9 × 10 10  cm Hz 1/2 W −1 at 15 µm, operating at a temperature of 40 K. This study introduces a novel all‐Si optoelectronic device architecture that offers a promising solution for improving the operating temperature and sensitivity of broadband VLWIR devices, making the whole system more compact and cost‐effective.

Correction to Supporting Information for Stransky et al., Toward a CRISPR-based mouse model of <i>Vhl</i> -deficient clear cell kidney cancer: Initial experience and lessons learned

Proceedings of the National Academy of Sciences Apr 01, 2025 DOI: 10.1073/pnas.2503473122

Translational Selenium Nanoparticles Promotes Clinical Non‐small‐cell Lung Cancer Chemotherapy via Activating Selenoprotein‐driven Immune Manipulation

Advanced Materials Yanzi Yu, Bin Xie, Jinlin Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202415818

AbstractReconstructing the tumor immune microenvironment is an effective strategy to enhance therapeutic efficacy limited by immunosuppression in non‐small‐cell lung cancer (NSCLC). In this study, it is found that selenium (Se) depletion and immune dysfunction are present in patients with advanced NSCLC compared with healthy volunteers. Surprisingly, Se deficiency resulted in decreased immunity and accelerated rapid tumor growth in the mice model, which further reveals that the correlation between micronutrient Se and lung cancer progression. This pioneering work achieves 500‐L scale production of Se nanoparticles (SeNPs) at GMP level and utilizes it to reveal how and why the trace element Se can enhance clinical immune‐mediated treatment efficacy against NSCLC. The results found that translational SeNPs can promote the proliferation of NK cells and enhance its cytotoxicity against cancer cells by activating mTOR signaling pathway driven by GPXs to regulate the secretion of cytokines to achieve an antitumor response. Moreover, a clinical study of an Investigator‐initiated Trial shows that translational SeNPs supplementation in combination with bevacizumab/cisplatin/pemetrexed exhibits enhanced therapeutic efficacy with an objective response rate of 83.3% and a disease control rate of 100%, through potentiating selenoprotein‐driven antitumor immunity. Taken together, this study, for the first time, highlights the translational SeNPs‐enhanced therapeutic efficacy against clinical advanced NSCLC.

Homo‐Hetero Double Junction Coupling Weakens Exciton Effects to Enhance Selective Photocatalytic O<sub>2</sub> Activation on Carbon Nitride

Advanced Materials Suhang Meng, Jialu Li, Siyu Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202420080

AbstractExciton effects caused by the inherent dielectric confinement in the 2D material carbon nitride (CN) severely limit the transfer of photogenerated carriers and the selective generation of free radicals. Herein, a homo‐hetero double junction coupling strategy is reported to address these challenges. Ternary homojunction carbon nitride (HCCN) functionalized with cyano and cyanamide groups is constructed with a built‐in electric field that efficiently separates the electron–hole into different structural units, thereby reducing reverse charge recombination and weakening exciton effects. The introduction of α‐Fe2O3 (FO) subsequently constructs the homo‐hetero double junction catalyst FO/HCCN with a built‐in electric field 127 times stronger than HCCN, which promotes the directional migration of carriers after exciton dissociation and achieves ≈100% selective generation of ·O2− from O2. These results suggest that FO/HCCN achieves 99.6% removal of tetracycline within 20 min, with a degradation rate 12 and 46 times higher than FO/CN and HCCN, respectively. In addition, the system shows excellent stability and cyclability in real‐life light experiments and trace organic contaminant removal. This homo‐hetero double junction coupling strategy opens up new avenues in weakening exciton effects and precisely controlling the generation of free radicals.