Browse Articles
Discover research articles across all indexed journals
Atomically Dispersed Co/Mo Sites Anchored on Mesoporous Carbon Hollow Spheres for Highly Selective Oxygen Reduction to Hydrogen Peroxide in Acidic Media
Abstract Two‐electron oxygen reduction reaction (2e − ORR) in acidic media is a promising route for the decentralized and on‐site hydrogen peroxide (H 2 O 2 ) generation. Nevertheless, strong interaction between active sites and * OOH intermediates usually induces the O─O bond cleavage to convert 2e − pathway into the sluggish 4e − ORR. Therefore, it is highly necessary to optimize the electronic structure of 2e − ORR electrocatalysts for the regulation of adsorption energy. Herein, we propose the utilization of atomically dispersed Co/Mo sites anchored on mesoporous carbon hollow spheres (Co/Mo‐MCHS) via a template‐engaged strategy for highly selective ORR to H 2 O 2 in acid. Benefitting from the electron‐donating effect of Mo atoms, an enriched electron density around the Co center for Co/Mo‐MCHS is observed, resulting in optimal adsorption of the key * OOH intermediates to approach the apex of 2e − ORR volcano plot. Moreover, the introduction of Mo species simultaneously suppresses the electroreduction of as‐obtained H 2 O 2 on Co sites. As a consequence, Co/Mo‐MCHS delivers a high H 2 O 2 selectivity of 90–95% in acid. The flow cell based on the Co/Mo‐MCHS catalyst achieves a remarkable H 2 O 2 yield of 2102 mg for 150 h. Moreover, this strategy can be extended to other early transition metal elements with similar electronic modifier effects.
“Water‐In‐Oil” Electrolyte Enabled by Microphase Separation Regulation for Highly Reversible Zinc Metal Anode
AbstractThe sustained hydrogen evolution and zinc (Zn) dendrite growth greatly impede the practical application of low‐cost aqueous Zn metal batteries (ZMBs). Herein, for the first time, a microphase separation strategy is proposed to construct a ″water‐in‐oil (W/O) electrolyte to endow durable ZMBs. As validated by theoretical modeling and experimental characterizations, the unique reverse micelle structure within the electrolyte not only disrupts water hydrogen bonding and efficiently inhibits the water consumption at Zn anode, but also undergoes directed movement and reversible demulsification under electric field, thus enhancing the anode desolvation kinetics and inhibiting the interfacial side reactions. Owing to the simultaneous regulation of water molecules in both electrolyte bulk and anode interface, this W/O electrolyte achieves a high Zn plating/stripping Coulombic efficiency of 99.76% over 6000 cycles, and maintains an extend lifespan in Zn||V10O24·12H2O (VOH) cells with negligible hydrogen evolution and dendrite formation. These key findings are expected to promote the electrolyte engineering toward reversible ZMBs.
Comment on “A re-examination of claims of aminoferrocene–graphene-based molecular magnets,” [Appl. Phys. Lett. <b>124</b>, 111903 (2024)]
Proximity‐Mediated Multi‐Ferroelectric Coupling in Highly Strained EuO‐Graphene Heterostructures
Abstract2D van der Waals materials and their heterostructures are a fantastic playground to explore emergent phenomena arising from electronic quantum hybridization effects. In the last decade, the spin‐dependant hybridization effect pushed this frontier further introducing the magnetic proximity effect as a promising tool for spintronic applications. Here the uncharted proximity‐controlled magnetoelectric effect in EuO/graphene heterostructure is unveiled. This is obtained while creating a new multiferroic hybrid heterostructure with multifunctional properties. Using a topotactic method magnetic insulating EuO thin films on graphene is grown under high compressive strain, which induces the appearance of an additional ferroelectric order, with an electric polarization that reaches up to 18 µC cm−2 at room temperature. This observation therefore quantitatively confirms the theoretical predictions made 15 years ago of a strain‐induced ferroelectric state in EuO. Moreover, the EuO induces a magnetic proximity state into the graphene layer by interfacial hybridization. This new ferroelectric state in the EuO/graphene heterostructure is stable up to room temperature where it coexists with the EuO/graphene magnetic state. Furthermore, intertwined magneto‐electric effects are shown in these strained heterostructures which can facilitate the manipulation of magnetization and electric polarization in future memory and neuromorphic devices.
Crystallization regulation and defect suppression of CsPbI2Br perovskite using a dual-functional additive
Inorganic CsPbI2Br perovskite solar cells have attracted widespread attention due to their outstanding performance and photo-thermal stability. However, the rapid crystallization of the solution-processed CsPbI2Br film often results in poor crystallinity and a high density of defects, which seriously restrict the improvement of the device performance. Here, we introduce a dual-functional additive, 4-amino-5-aminomethyl-2-methylpyrimidine (AMP), to regulate the crystallization and reduce the defect density of the CsPbI2Br film. The introduction of AMP notably improves the crystallinity and morphology of the CsPbI2Br film and promotes a preferred crystal orientation. The C=N and amino groups in AMP interact with Pb2+ and Br- in the perovskite, respectively, effectively passivating the defects and improving the carrier lifetime. As a result, the power conversion efficiency of the optimized carbon-based hole-transport layer-free device reaches 13.30%, which exceeds the 10.66% of the control device. The environmental and light stability of the device is also significantly improved. This work provides valuable insights into the development of high-performance all-inorganic perovskite solar cells via additive strategies.
Induced proximity pushes beyond protein degraders, as first RIPTAC moves into the clinic
Regulating the Isomerization Geometry and Energy State of Covalent Organic Frameworks for Enhanced Oxygen Reduction Activity
Abstract Embedding isomer entities onto crystalline frameworks with precisely defined spatial distributions represents a promising approach to enhancing the efficiency of oxygen reduction reaction (ORR) in fuel cells. However, accurately constructing covalent organic frameworks (COFs) to regulate energy state effectively remains a significant challenge. Herein, an innovative geometric isomerization strategy aimed at minimizing the rotational barrier energy (ΔE), average local ionization energy (ALIE), and Gibbs free energy (ΔG) for ORR within COFs is proposed. Based on this strategy, isomeric Py‐COF‐αα with 2,2‐substitution, Py‐COF‐ββ with 3,3‐substitution, and Py‐COF‐αβ with 2,3‐substitution on the mainchain frameworks have been obtained. The electronic states and intermediate adsorption capabilities are finely tuned through isomer modification, yielding a precisely controllable chemical activity. Notably, Py‐COF‐αβ with lower ΔE between thiophenes achieves remarkable performance, evidenced by a half‐wave potential of 0.77 V vs reversible hydrogen electrode (RHE), surpassing most reported metal‐free electrocatalysts. Combined with theoretical prediction and in situ Raman spectra, it is revealed that the increased dipole moment and non‐uniform charge distribution caused by isomer endows pentacyclic‐carbon (thiophene β‐position) far from sulfur atoms with efficient catalytic activity. This work has opened up a novel paradigm for the isomerization of COFs and underscores the pivotal role of charge regulation in facilitating efficient catalysis.
Identifying NV center axes via spatially varying microwave fields for vector magnetometry
Vector magnetometry using an ensemble of nitrogen-vacancy (NV) centers holds great promise across a wide range of applications. Since NV centers are sensitive to external magnetic fields projected onto their crystallographic axes, distinguishing NV centers with different orientations is essential for fully extracting vectorial magnetic field information. While a calibrated magnetic bias field or optical polarization has been widely used for this purpose, the use of microwave fields remains relatively unexplored. Here, we demonstrate the identification of NV axes using the spatial variation of microwave magnetic fields generated by a microwave loop structure. Continuous-wave optically detected magnetic resonance scanned over the NV center ensemble shows distinct patterns that align well with a simplified model for each NV axis. After identifying the NV axes, we reconstruct the magnitude and orientation of the external magnetic field. This technique expands the potential for miniaturizing and enhancing NV-based vector magnetic sensors.
Clinical Outcomes With Normothermic Pulsatile Organ Perfusion in Heart Transplantation: A Report From the OCS Heart Perfusion Registry
BACKGROUND: A preservation system, the Organ Care System (OCS; TransMedics) uses normothermic pulsatile perfusion during organ transport for heart transplantation. This system has demonstrated favorable outcomes in hearts recovered from extended-criteria donors after brain death (DBD) and donors after circulatory death (DCD). METHODS: The OCS Heart Perfusion Registry collects data on US heart transplantations using the OCS, static cold storage (SCS), or thoracoabdominal normothermic regional perfusion (NRP) and donor hearts recovered from DBD or DCD donors. We analyzed donor and recipient characteristics and posttransplantation outcomes in patients transplanted with OCS donor hearts (either DBD or DCD) compared with SCS hearts, and with OCS hearts from DCD donors compared with those recovered with NRP followed by SCS. Propensity score matching was used in survival analyses to adjust for differences among recipient characteristics. RESULTS: Between 2021 and 2023, 3225 consecutive heart transplantations enrolled from 56 centers were analyzed in the Heart Perfusion Registry. The OCS was used in 854 of 3225 heart transplantations (26.4%), among which 340 (39.8%) were DBD and 514 (60.2%) were DCD donors, whereas 2174 DBD donors were recovered with SCS and another 197 DCD donors with NRP techniques. The OCS-DBD group experienced a greater number of organ offer refusals before final acceptance (13 versus 6; Wilcoxon rank sum, P <0.001) and a longer transport distance (667 miles versus 232 miles; Wilcoxon rank sum, P <0.001) compared with SCS-DBD. Survival at 12 months was similar between the 2 groups (89.9% for OCS-DBD versus 90.6% for SCS-DBD; marginal Cox model, P =0.54). Among the OCS-DCD and SCS-DBD groups, survival at 12 months was also similar (91.0% versus 92.5%, respectively; marginal Cox model, P =0.32). The OCS-DCD and NRP-DCD groups demonstrated similar survival (91.0% versus 91.7%, respectively; log rank, P =0.63), although the transport distance was longer in OCS-DCD compared with DCD with NRP followed by SCS (400 miles versus 223 miles; Wilcoxon rank sum, P <0.001). By 2023, 90% of all OCS donor management and recovery was performed with dedicated organ recovery teams. CONCLUSIONS: We demonstrate that real-world implementation of the OCS for DBD donors (using predominantly a dedicated recovery team) is associated with expanded donor criteria, longer transport distance, and excellent posttransplantation outcomes. In OCS-DCD donors, outcomes parallel those of donors recovered with NRP-DCD and compare favorably with DBD donor organs.
Theoretical characterization of NV-like defects in 4H-SiC using ADAQ with SCAN and r2SCAN meta-GGA functionals
Kohn–Sham density functional theory is widely used for screening color centers in semiconductors. While the Perdew–Burke–Ernzerhof (PBE) generalized gradient approximation functional is efficient, its accuracy in describing defects is often not sufficient. The Heyd–Scuseria–Ernzerhof (HSE) functional is more accurate but computationally expensive, making it impractical for large-scale screening. This study evaluates the strongly constrained and appropriately normed (SCAN) family of meta-GGA functionals as potential alternatives to PBE for characterizing NV-like color centers in 4H-SiC using the Automatic Defect Analysis and Qualification (ADAQ) framework. We examine nitrogen, oxygen, fluorine, sulfur, and chlorine vacancies in 4H-SiC, focusing on applications in quantum technology. Our results show that SCAN and r2SCAN achieve a greater accuracy than PBE, approaching HSE's precision at a lower computational cost. This suggests that the SCAN family offers a practical improvement for screening new color centers, with computational demands similar to PBE.
Genetics opens new route to degrader discovery
Tuning Transition Metal 3d Spin state on Single‐atom Catalysts for Selective Electrochemical CO <sub>2</sub> Reduction
Abstract Tuning transition metal spin states potentially offers a powerful means to control electrocatalyst activity. However, implementing such a strategy in electrochemical CO 2 reduction (CO 2 R) is challenging since rational design rules have yet to be elucidated. Here we show how the addition of P dopants to a ferromagnetic element (Fe, Co, and Ni) single‐atom catalyst (SAC) can shift its spin state. For instance, with Fe SAC, P dopants enable a switch from low spin state ( d x2‐ y2 0 , d z2 0 , d xz 2 , d yz 1 , d xy 2 ) in Fe‐N 4 to high spin state ( d x2‐y2 0 , d xz 1 , d yz 1 , d z2 1 , d xy 2 ) in Fe‐N 3 ‐P. This is studied using a suite of characterization efforts, including X‐ray absorption spectroscopy (XAS), electron spin resonance (ESR) spectroscopy, and superconducting quantum interference device (SQUID) measurements. When used for CO 2 R, the SAC with Fe‐N 3 ‐P active sites yields > 90% Faradaic efficiency to CO over a wide potential window of ≈530 mV and a maximum CO partial current density of ≈600 mA cm −2 . Density functional theory calculations reveal that high spin state Fe 3+ exhibits enhanced electron back donation via the d xz / d yz ‐π* bond, which enhances * COOH adsorption and promotes CO formation. Taken together, the results show how the SAC spin state can be intentionally tuned to boost CO 2 R performance.
Antibody‐level Bacteria Grabbing by “Mechanic Invasion” of Bioinspired Hedgehog Artificial Mesoporous Nanostructure for Hierarchical Dynamic Identification and Light‐Response Sterilization
Abstract The interactions exploration between microorganisms and nanostructures are pivotal steps toward advanced applications, but the antibody‐level bacteria grabbing is limited by the poor understanding of interface identification mechanisms in small‐sized systems. Herein, the de novo design of a bioinspired hedgehog artificial mesoporous nanostructure (core–shell mesoporous Au@Pt (mAPt)) are proposed to investigate the association between the topography design and efficient bacteria grabbing. These observations indicate that virus‐like spiky topography compensates for the obstacles faced by small‐sized materials for bacteria grabbing, including the lack of requisite microscopic cavities and sufficient contact area. Molecular dynamics simulation reveals that spiky topography with heightened mechano‐invasiveness (6.56 × 10 3 KJ mol −1 ) facilitates antibody‐level bacteria grabbing, attributed to the “mechanic invasion”‐induced hierarchical dynamic identification ranging from rough surface contact to penetration fixation. Furthermore, light reflectance and finite element calculation confirmed that mAPt exhibits near‐superblack characteristic and plasmonic hot spot, facilitating enhanced photothermal conversion with power dissipation density at 2.04 × 10 21 W m −3 . After integrating the hierarchical dynamic identification with enhanced light response, mAPt enables advanced applications in immunoassay with 50‐fold sensitivity enhancement and over 99.99% in vitro photothermal sterilization. It is anticipated that this novel biomimetic design provides a deeper understanding of bacteria grabbing and a promising paradigm for bacteria combating.
Response by Yu and Cheng to Letter Regarding Article, “Effect of Colchicine on Coronary Plaque Stability in Acute Coronary Syndrome as Assessed by Optical Coherence Tomography: The COLOCT Randomized Clinical Trial”
Zeeman-effect-induced luminescence suppression in Er3+-doped GdF3 nanoparticles under dual-wavelength excitation
Magnetic field-modulated luminescence in lanthanide-doped nanomaterials offers crucial insights for advancing magneto-optical technologies, yet the fundamental mechanisms governing luminescence are still not fully understood. Here, we report Zeeman-effect-induced luminescence suppression in Er3+-doped GdF3 nanoparticles under dual-wavelength excitation (808 nm broadband and 527 nm narrowband) at moderate magnetic fields (up to 1.3 T). Under 808 nm excitation, upconversion emissions (528, 546, and 656 nm) dominated by two-photon absorption exhibit &gt;79% intensity suppression (0.89 T), attributed to energy mismatch caused by Zeeman splitting of sublevels. In contrast, under 527 nm excitation, downconversion emissions (656, 842, and 983 nm) show uniform suppression (∼66% at 1.3 T) due to magnetic field-induced splitting of the 2H11/2 energy level. A simplified model elucidates how Zeeman splitting alters absorption resonance, with theoretical calculations aligning closely with experimental trends. This study reveals the physical mechanisms of magnetic field modulation using dual-wavelength excitation, providing a foundation for expanding magneto-optical technologies in imaging and sensing applications.
Oral STING agonist inhibits tumour growth
Flexible Patterned Fuel Cell Patches Stimulate Nerve and Myocardium Restoration
AbstractThe distribution of electrical potentials and current in exogenous electrostimulation has significant impacts on its effectiveness in promoting tissue repair. However, there is still a lack of a flexible, implantable power source capable of generating customizable patterned electric fields for in situ electrostimulation(electrical stimulation). Herein, this study reports a fuel cell patch (FCP) that can provide in situ electrostimulation and a hypoxic microenvironment to promote tissue repair synergistically. Stable and highly efficient PtNi nanochains and PtNi nanocages electrocatalysts with anti‐interference properties catalyze glucose oxidation and oxygen reduction respectively in an encapsulation‐free fuel cell. The laser‐induced graphene (LIG) electrode loaded with PtNi electrocatalysts is transferred to the surface of a flexible chitosan hydrogel. The resulting flexible FCP can adapt to tissues with different morphologies, firmly adhere to prevent suturing, and provide potent electrostimulation (0.403 V, 51.55 µW cm−2). Additionally, it consumes oxygen in situ to create a hypoxic microenvironment, increasing the expression of hypoxia‐inducible factor‐1α (HIF‐1α). Based on the different pattern requirements of exogenous electrostimulation during the repair of various types of tissue, an axial FCP for peripheral nerves and a flower‐patterned FCP for myocardial tissue are constructed and transplanted into animals, showing significant tissue repair in both models.
Unravelling the Atomic Structure of a Metal‐Covalent Organic Framework Assembled from Ruthenium Metalloligands
Abstract Covalent and metal‐organic frameworks (COFs and MOFs) have shown great promise in light‐driven processes mainly due to their ligand‐to‐metal charge‐separation properties, as well as having access to a diverse range of photoactive metalloligands and organic linkers. However, both frameworks present individual drawbacks that can potentially be avoided by combining both systems (metal and covalent) to produce metal‐covalent organic frameworks (MCOFs), exhibiting the advantages of both material types. Yet, due to their poor crystallinity, the understanding of the structure‐properties relation of MCOFs remains unclear. Herein, we report photoactive linkers in the form of a [Ru(tpy) 2 ] 2+ (tpy: 2,2′,6,2″‐terpyridine) complex which covalently binds to a luminescent pyrene core to yield a new, photoactive Schiff‐base MCOF. The structure, thermal, electronic, and optical properties of this novel material have been exhaustively characterized by a wide range of microscopy, spectroscopic, and computational methods. This combined experimental and computational work represents a significant step toward the fundamental understanding of the photoactive units within the framework, their hierarchical arrangement and interactions with substrates, which is essential for the future design of efficient photocatalytic materials.
Correction to: Prenatal Lipopolysaccharides Exposure Induces Transgenerational Inheritance of Hypertension
Signature of metal–metal bonding in Ir–Ni–Ta–(B) bulk metallic glasses
In bulk metallic glasses, minimizing the total electronic energy is a key factor in glass formation. However, it remains unclear how this energy is minimized, particularly in metallic glasses made up of transition metal elements. In this study, we use synchrotron-based photoemission spectroscopy to investigate the electronic structure of Ir–Ni–Ta–(B) bulk metallic glasses, which are primarily composed of transition metals and have recently been discovered to exhibit exceptional glass-forming ability. We observe distinct chemical shifts in the core levels of Ir and Ta in opposite directions, while the Ni is close to an elemental-like state, suggesting significant Ir–Ta charge transfer and metal–metal bonding in the metallic glass phase. Additionally, a pseudogap at EF suggests an additional contribution from the itinerant electrons to the glass-forming ability, but likely playing a secondary role as it is only observed in Ir35Ni20Ta40B5. Our findings highlight the critical role of metal–metal bonding in facilitating the glass formation of metallic glasses composed of transition metals.