Browse Articles

Discover research articles across all indexed journals

Structural softness in photovoltaic perovskites

Applied Physics Letters Runda Li, Yixin Luo, Libing Yao et al. Apr 01, 2025 DOI: 10.1063/5.0256642

Perovskite photovoltaics (PVs) are a compelling candidate as a next-generation energy harvesting technology owing to the outstanding optoelectronic properties, low cost, and facile fabrication of perovskite materials. In the meantime, unsolved issues in perovskite stability still challenge the prospect of final commercialization. Recently, many studies have demonstrated that most of these advantages and issues are closely related to the soft nature of perovskites, making the understanding of these properties increasingly important. Here, we summarize and assess the interrelated origins and impacts of this unique property as well as its mechanistic interpretations, ranging from the constituent ions to the perovskite lattice and electronic structures. We also highlight recent advances in making use of this property for improving the perovskite materials. Finally, the remaining challenges in fully understanding the soft nature of perovskites are critically discussed. We hope this effort will provide new insights for making perovskite PVs more reliable and help them reach their full potential.

Biomimetic propulsion system efficiency for unmanned underwater vehicle

Scientific Reports Piotr Szymak, Paweł Piskur, Rafał Kot et al. Apr 01, 2025 DOI: 10.1038/s41598-025-95702-7

Abstract This paper covers experimental research provided for Biomimetic Unmanned Underwater Vehicle (BUUV). The tests were conducted in a laboratory water tunnel equipped with a direct force-measured sensor and system for Particle Image Velocimetry (PIV) analysis. Different control parameters were tested, and then the generated thrust was compared with electric energy consumption. The main goal of the research is to develop a low hydroacoustic noise and high-energy efficiency propulsion system based on single, flexible fins. The final result is a set of Pareto optimal solutions, which makes it possible to draw more general conclusions on the design of the undulating propulsion system.

New routes for spermine biosynthesis

Journal of Biological Chemistry Bin Li, Hamid R. Baniasadi, Jue Liang et al. Apr 01, 2025 DOI: 10.1016/j.jbc.2025.108390

Metamaterial-based resonant structure for miniaturized low-frequency relativistic magnetrons

Applied Physics Letters Mingyao Pi, Bin Ding, Difu Shi et al. Apr 01, 2025 DOI: 10.1063/5.0264985

This paper introduces a metamaterial (MTM)-based resonant structure and applies it to relativistic magnetrons (RMs) with an all-cavity axial extraction technique. The MTM structure is designed to overcome the size limitations of conventional RMs and enable π-mode operation below the cutoff frequency of traditional structures. High-frequency analysis confirms the double-negative characteristics of the MTM structure, enabling π-mode operation below the cutoff frequency. Particle-in-cell simulation of CST was employed to compare the performance of the MTM RM with a state-of-the-art traditional design under an identical operating condition. Consequently, for L-band designs, the MTM RM achieves a significant reduction in volume, the radius being 70% of the traditional design, leading to approximately a 50% volume reduction, while other performance metrics such as operating current, startup time, saturation time, output power, efficiency, and frequency are nearly the same as the traditional RM. The study thus validates the potential of MTMs in enhancing the performance and miniaturization of RMs without compromising efficiency or operational mechanisms.

Analysis on the causes of unsatisfactory prevention effect of postpartum VTE in Chinese women

Scientific Reports Yonghui Xu, Fei Xiao, Ji He et al. Apr 01, 2025 DOI: 10.1038/s41598-025-95790-5

Molecular Chain Interpenetration–Enabled High Interfacial Compatibility of Ionic and Electronic Conductors for Stretchable Ionic Devices

Advanced Materials Yaoxian Zheng, Haichuan Ning, Bicheng Zhao et al. Apr 01, 2025 DOI: 10.1002/adma.202417175

Abstract Ionic devices find applications such as flexible electronics and biomedicines and function by exploiting hybrid circuits of mobile ions and electrons. However, the poor interfacial compatibility of hard electronic conductors with soft ionic conductors in ionic devices leads to low deformability, sensitivity, electromechanical responses, and stability. Herein, an interpenetrating interface between silicone‐modified polyurethane/carbon nanotube electronic conductors and ionoelastomers in an ionic device using in situ polymerization is fabricated. A robust interpenetrating electronic/ionic conductor interface is realized through molecular chain entanglement and molecular forces (such as ion‐dipole interactions and H‐bonds), effectively enhancing the bonding strength and contact area between the components and resulting in an excellent flexibility, stability, and device performance. The electroadhesive prepared based on this strategy exhibits a superrobust shear strength of 317 kPa under a reduced voltage input of −4 V, and the diode and the transistor can undergo arbitrary deformation while maintaining the semiconductor device characteristics, including rectification and switching. In addition, electromechanical transducers exhibit sensitive electrical responses to various deformation signals. This solution to the interfacial compatibility problems of electronic and ionic conductors holds promise for the development of multifunctional ionic devices.

ER stress and viral defense: Advances and future perspectives on plant unfolded protein response in pathogenesis

Journal of Biological Chemistry Binita Adhikari, Jeanmarie Verchot, Federica Brandizzi et al. Apr 01, 2025 DOI: 10.1016/j.jbc.2025.108354

Broadband high-efficiency aperiodic metasurface for the vortex waves generation

Applied Physics Letters Volodymyr I. Fesenko, Erick R. Baca-Montero, Oleksiy V. Shulika Apr 01, 2025 DOI: 10.1063/5.0255689

Vortices have diverse applications in optics, such as ultrafast singular optics, quantum optics, microscopy as well as optical trapping. These applications require compact, easily integrated, and high-performance devices, so the development of highly efficient broadband single-layer structures for vortex generation and control is an extremely relevant research topic. Here, we propose an aperiodic transmissive all-dielectric metasurface, which controls the phase delay of the electromagnetic waves via Pancharatnam–Berry (PB) phase manipulation. The metasurface is constructed on the basis of TiO2 nanopillars in the form of an aperiodic golden angle (GA) Vogel spiral. Through numerical simulations, we demonstrate that the metasurface enables the generation of vortex waves with a desired topological charge l and high mode purity over a wide wavelength range from 470 to 580 nm, which indicates a relative bandwidth of 21%. The proposed metasurface platform, due to its simple structure and wide bandwidth, is a good candidate for manipulating ultrashort vortex pulses and for the developing optical devices with improved functionality and performance.

Building occupancy estimation using single channel CW radar and deep learning

Scientific Reports Sourav Kumar Pramanik, Md. Shafkat Hossain, Shekh Md. Mahmudul Islam Apr 01, 2025 DOI: 10.1038/s41598-025-95752-x

The multiple myeloma drug market

Nature Reviews Drug Discovery Julia L. M. Morris, Rachel M. Webster Apr 01, 2025 DOI: 10.1038/d41573-025-00017-x

Enhanced identification of small molecules binding to hnRNPA1 via cryptic pockets mapping coupled with X-ray fragment screening

Journal of Biological Chemistry Louise Dunnett, Sayan Das, Vincenzo Venditti et al. Apr 01, 2025 DOI: 10.1016/j.jbc.2025.108335

Double-pulsed-induced medium-range order in Sn-doped Ga2O3 thin films: A strategy for enhanced record-breaking electrical properties

Applied Physics Letters Yao Wang, Long Wang, Yanbo Dong et al. Apr 01, 2025 DOI: 10.1063/5.0257824

This study explores Sn-doped Ga2O3 thin films synthesized via the double-pulse metalorganic chemical vapor deposition (MOCVD) method, highlighting its unique advantages in improving film microstructure and electrical properties. The results show that the double-pulse Sn-doped technique, through intermittent atomic supply, promotes medium-range ordering of Sn atoms within the Ga2O3 lattice, reducing lattice defects and enhancing crystallinity. Secondary ion mass spectrometry further reveals a doping activation rate of 95%. Notably, the films exhibit exceptional electrical performance, achieving a Hall mobility of 175.61 cm2/V·s at a carrier concentration of 2.17 × 1018 cm−3. This value represents a record-high mobility for β-Ga2O3 at this carrier concentration, significantly surpassing the performance of films prepared via conventional continuous deposition methods. This study offers valuable insights into the mechanisms of double-pulse MOCVD and its potential for Ga2O3-based high-performance electronic devices, providing an effective pathway for optimizing next-generation electronic materials.

Protective effects of baicalin against deoxynivalenol-induced oxidative and inflammatory damage in chicken-derived hepatic 3D cell cultures

Scientific Reports Júlia Vörösházi, Máté Mackei, Csilla Sebők et al. Apr 01, 2025 DOI: 10.1038/s41598-025-95868-0

Abstract Deoxynivalenol (DON) is a trichothecene mycotoxin often contaminating grains used in poultry feed production and causing several adverse effects in farm animals. Therefore, it is important to investigate compounds that can be potential candidates to mitigate these effects, such as baicalin. The effects of DON and baicalin were investigated in chicken-derived 3D hepatic cell cultures, and cell viability, LDH activity, oxidative parameters (NRF-2, 8-OHdG) and inflammatory parameters (IL-6, IL-8, IFN-γ) were monitored for 24 and 48 h. Our results suggest that DON reduced cellular metabolic activity but did not prove to be cytotoxic, and baicalin was able to attenuate this adverse effect. The change in extracellular LDH activity suggests that after 48 h the cells have already started to respond to the adverse effects of the toxin and protective mechanisms were induced. Based on the measured oxidative parameters, baicalin showed antioxidant activity, but after longer exposure, our results indicate a prooxidant effect. Baicalin also had an anti-inflammatory effect based on the amount of IL-6 and IL-8, while DON exerted a dose-and time-dependent pleiotropic activity. These results suggest that DON may have an impact on cellular inflammation and oxidative homeostasis, and that baicalin could be able to alleviate these adverse effects.

On‐Chip Non‐Volatile Reconfigurable Phase Change Topological Photonics

Advanced Materials Shoujun Zhang, Wenhao Wang, Zhonglei Shen et al. Apr 01, 2025 DOI: 10.1002/adma.202418510

Abstract Programmable on‐chip terahertz (THz) topological photonic devices are poised to address the rising need for high‐capacity data systems, offering broad bandwidth, minimal loss, and reconfigurability. However, current THz topological chips rely on volatile tuning mechanisms that require continuous power to function. Here, a nonvolatile, programmable THz topological silicon chip is demonstrated that integrates a waveguide‐cavity coupled system with phase‐change material, Ge 2 Sb 2 Te 5 (GST), enabling persistent and efficient functionality without constant power input. Through precise tuning of the intermediate phase states of GST between amorphous and crystalline forms, a stable, non‐volatile reconfiguration of the topological cavity is achieved, enabling transitions across over‐coupling, critical coupling, and under‐coupling states. Multi‐level modulation of resonance transmission with a modulation depth of 70 dB is demonstrated, enabling precise control over the onset and disappearance of resonance modes and dynamic tuning of critical coupling states. The THz topological chip facilitates phototunable, volatile modulation across nonvolatile configurations, allowing controlled resetting of the coupling states of the cavity. Here, the first nonvolatile, programmable terahertz topological integrated chip is demonstrated, offering flexible control over resonance modes. This advancement significantly paves the way for integrating phase change materials into silicon topological chips for programmable photonic devices, including interconnects, modulators, and logic circuits.

Toward High‐Performance, Flexible, Photo‐Assisted All‐Solid‐State Sodium‐Metal Batteries: Screening of Solid‐Polymer‐Based Electrolytes Coupled with Photoelectrochemical Storage Cathodes

Advanced Materials Rong‐Hao Wang, Yu‐Zhen Zhang, Weiyi Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202500348

Abstract The advancement of photo‐assisted rechargeable sodium‐metal batteries with high energy efficiency, lightweight structure, and simplified design is crucial for the growing demand in portable electronics. However, addressing the intrinsic safety concerns of liquid electrolytes and the sluggish reaction kinetics in existing photoelectrochemical storage cathodes (PSCs) remains a significant challenge. In this work, functionalized light‐driven composite solid electrolyte (CSE) fillers are systematically screened, and optimized PSC materials are employed to construct advanced photo‐assisted solid‐state sodium‐metal battery (PSSMB). To further enhance the mechanical properties and poly(ethylene oxide) compatibility of the CSE, natural lignocellulose is incorporated, enabling the fabrication of flexible PSSMBs. In situ tests and density functional theory calculations reveal that the light‐driven electric field facilitated sodium salt dissociation, reduced interfacial resistance, and improved ionic conductivity (0.1 mS cm −1 ). Meanwhile, energy‐level matching of the PSC maximized the utilization of photogenerated carriers, accelerating reaction kinetics and enhancing interface compatibility between the electrolyte and cathode. The resulting flexible pouch‐type PSSMB demonstrates a remarkable discharge capacity of 117 mAh g −1 and outstanding long‐term cycling stability, retaining 89.1% of its capacity and achieving an energy storage efficiency of 96.8% after 300 cycles at 1 C. This study highlights a versatile strategy for advancing safe, high‐performance solid‐state batteries.

Surface Template Realizing Oriented Perovskites for Highly Efficient Solar Cells

Advanced Materials Jing Chen, Zhen‐Huang Su, Bin Song et al. Apr 01, 2025 DOI: 10.1002/adma.202417054

Abstract Formamidinium lead iodide (FAPbI 3 ) perovskite films, ensuring optically active phase purity with uniform crystal orientation, are ideal for photovoltaic applications. However, the optically active α‐FAPbI 3 phase is easy to degrade into δ‐phase due to numerous defects within randomly oriented films. Here, a “quasi‐2D” perovskite template is pre‐deposited on the film surface within the crystallization process based on the two‐step preparation technology, which directly induced pure and highly orientated crystallization of α‐FAPbI 3 across the downward growth process. Furthermore, the enlarged interaction between 2D components with colloidal properties and lead iodide delayed the crystallization process effectively, yielding high crystallinity with low trap state density. The resulting perovskite photovoltaic devices exhibited a champion efficiency as high as 25.79% with comprehensively improved device stability. This work provides new insights into the utilization of 2D components and the formation mechanism behind 2D perovskites.

Structural analyses of apolipoprotein A-IV polymorphisms Q360H and T347S elucidate the inhibitory effect against thrombosis

Journal of Biological Chemistry Aron A. Shoara, Sladjana Slavkovic, Miguel A.D. Neves et al. Apr 01, 2025 DOI: 10.1016/j.jbc.2025.108392

Thermal resistance optimization of GaN-on-Si materials for RF HEMTs based on structure function method and static-pulsed I–V measurements

Applied Physics Letters Qingru Wang, Yu Zhou, Xiaozhuang Lu et al. Apr 01, 2025 DOI: 10.1063/5.0263898

A major obstacle in the commercialization of GaN-on-Si RF HEMTs lies in the elevated thermal resistance introduced by the AlN/AlGaN multi-layer buffer, employed for stress management. This issue adversely impacts device performance and reliability. In this study, the structure function method was utilized to precisely determine the intrinsic thermal resistance of GaN-on-Si materials. Results reveal that a single-layer AlN buffer demonstrates a significantly enhanced heat dissipation capability compared to conventional AlN/AlGaN multi-layer or superlattice buffer. Additionally, the thermal performance of device under operation was quantitatively assessed using static-pulsed I–V measurements. Through theoretical simulations, the influence of GaN buffer structures on heat distribution within GaN-on-Si RF devices was explored, indicating that optimizing GaN buffer thickness can further enhance thermal performance. This research offers a thorough understanding of the relationship between material structures and RF device thermal behavior, providing crucial insights for the thermal management design of GaN-on-Si RF HEMTs.

Histopathological analysis of duragen collagen matrix over time in humans

Scientific Reports Takuma Maeda, Kaima Suzuki, Peyton L. Nisson et al. Apr 01, 2025 DOI: 10.1038/s41598-025-95489-7

A General Strategy for Exceptionally Robust Conducting Polymer‐Based Bioelectrodes with Multimodal Capabilities Through Decoupled Charge Transport Mechanisms

Advanced Materials Yuhao Geng, Bowen Yao, Wei Zhong et al. Apr 01, 2025 DOI: 10.1002/adma.202417827

Abstract Bioelectrodes function as a critical interface for signal transduction between living organisms and electronics. Conducting polymers (CPs), particularly poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate), are among the most promising materials for bioelectrodes, due to their electrical performance, high compactness, and ease of processing, but often suffer from degradation or de‐doping even in some common environments (e.g., electrical stimulation, chemicals, and high temperatures). This instability therefore severely undermines their reliability in practical application. To resolve this critical issue, a novel strategy of separating electron transfer from electron‐ion transduction is proposed. Specifically, chemically derived holey graphene (HG), serving as an ultra‐stable mixed ion‐electron conductor, is introduced into the CP matrix. The HG can restore the CP's destructed conductive pathways, whilst its porosity and its intercalation by the CP synergically preserve fast ionic and molecular diffusion. The resulting bioelectrode therefore exhibits excellent low impedance, high charge injection capacity, electrochemical activity, and outstanding resilience to various harsh conditions, outperforming HG, reduced graphene oxide, CP, or graphene‐coated CP electrodes. Furthermore, this strategy also exhibits broad compatibility with various processing techniques and proves adaptable to other electrode systems, such as stretchable electrodes, paving the way for practical applications in electrophysical capture, neuron modulation, and biochemical analysis.