Browse Articles

Discover research articles across all indexed journals

In‐Sensor Computing with Visual‐Tactile Perception Enabled by Mechano‐Optical Artificial Synapse

Advanced Materials Jiaxing Guo, Feng Guo, Huijun Zhao et al. Apr 01, 2025 DOI: 10.1002/adma.202419405

AbstractIn‐sensor computing paradigm holds the promise of realizing rapid and low‐power signal processing. Constructing crossmodal in‐sensor computing systems to emulate human sensory and recognition capabilities has been a persistent pursuit for developing humanoid robotics. Here, an artificial mechano‐optical synapse is reported to implement in‐sensor dynamic computing with visual‐tactile perception. By employing mechanoluminescence (ML) material, direct conversion of the mechanical signals into light emission is achieved and the light is transported to an adjacent photostimulated luminescence (PSL) layer without pre‐ and post‐irradiation. The PSL layer acts as a photon reservoir as well as a processing unit for achieving in‐memory computing. The approach based on ML coupled with PSL material is different from traditional circuit–constrained methods, enabling remote operation and easy accessibility. Individual and synergistic plasticity are elaborately investigated under force and light pulses, including paired‐pulse facilitation, learning behavior, and short‐term and long‐term memory. A multisensory neural network is built for processing the obtained handwritten patterns with a tablet consisting of the device, achieving a recognition accuracy of up to 92.5%. Moreover, material identification has been explored based on visual‐tactile sensing, with an accuracy rate of 98.6%. This work provides a promising strategy to construct in‐sensor computing systems with crossmodal integration and recognition.

Inverse Oxide/Alloy‐Structured Nanozymes with NIR‐Triggered Enzymatic Cascade Regulation of ROS Homeostasis for Efficient Wound Healing

Advanced Materials Yongsen Zhao, Shiqi Zhao, Yu Du et al. Apr 01, 2025 DOI: 10.1002/adma.202418731

Abstract The precise spatiotemporal control of reactive oxygen species (ROS) generation and scavenging remains pivotal for infected wound healing. However, conventional nanozymes fail to adaptively regulate ROS dynamics across inflammatory and proliferative phases. A near‐infrared (NIR)‐activated inverse oxide/alloy‐structured nanozyme (Co 7 Fe 3 /ZnO@C) is developed, featuring enzymatic cascade activities to tune ROS homeostasis through synergistic chemodynamic (CDT), photodynamic (PDT), and photothermal (PTT) therapies. The nanozyme orchestrates a self‐regulated cascade: peroxidase (POD)‐like activity initially generates bactericidal hydroxyl radicals in acidic wounds, while subsequent NIR triggers hot electron transfer from Co 7 Fe 3 to ZnO, facilitating synchronized superoxide dismutase (SOD)‐like, catalase (CAT)‐like and hydroxyl radical antioxidant capacity (HORAC) activities to scavenge residual ROS. This cascaded network dynamically balances ROS production (POD) and scavenging (NIR‐driven SOD/CAT/HORAC), eradicating bacteria while resolving inflammation. In vitro/vivo studies have shown that the proposed method for maintaining ROS homeostasis can markedly enhance the rate of wound healing by the regulation of the inflammatory environment within the injured tissue and the facilitation of rapid re‐epithelialization. This work provides an intelligent nanozyme platform that simulates the function of natural enzymes and constructs a cascade reaction strategy to balance the antibacterial and anti‐inflammatory demands in the wound microenvironment.

Correction for Quach et al., Deep learning–driven bacterial cytological profiling to determine antimicrobial mechanisms in <i>Mycobacterium tuberculosis</i>

Proceedings of the National Academy of Sciences Apr 01, 2025 DOI: 10.1073/pnas.2504475122

Highly Ordered Conductive Metal‐Organic Frameworks with Chemically Confined Polyoxometalate Clusters: A Dual‐Functional Electrocatalyst for Efficient H <sub>2</sub> O <sub>2</sub> Synthesis and Biomass Valorization

Advanced Materials Tong Bao, Yunuo Wu, Chencheng Tang et al. Apr 01, 2025 DOI: 10.1002/adma.202500399

Abstract The design of bifunctional and high‐performance electrocatalysts that can be used as both cathodes and anodes for the two‐electron oxygen reduction reaction (2e − ORR) and biomass valorization is attracting increasing attention. Herein, a conserved ligand replacement strategy is developed for the synthesis of highly ordered conductive metal‐organic frameworks (Ni‐HITP, HITP = 2, 3, 6, 7, 10, 11‐hexaiminotriphenylene) with chemically confined phosphotungstic acid (PW 12 ) nanoclusters in the nanopores. The newly formed Ni−O−W bonds in the resultant Ni‐HITP/PW 12 electrocatalysts modulate the electronic structures of both Ni and W sites, which are favorable for cathodic 2e − ORR to H 2 O 2 production and anodic 5‐hydroxymethylfurfural oxidation reaction (HMFOR) to 2, 5‐furandicarboxylic acid (FDCA), respectively. In combination with the deliberately retained conductive frameworks and ordered pores, the dual‐functional Ni‐HITP/PW 12 composites enable a H 2 O 2 production rate of 9.51 mol g cat −1  h −1 and an FDCA yield of 96.8% at a current density of 100 mA cm −2 /cell voltage of 1.38 V in an integrated 2e − ORR/HMFOR system, significantly improved than the traditional 2e − ORR/oxygen evolution reaction system. This work has provided new insights into the rational design of advanced electrocatalysts and electrocatalytic systems for the green synthesis of valuable chemicals.

Amyloid‐Templated Ceria Nanozyme Reinforced Microneedle for Diabetic Wound Treatments

Advanced Materials Qize Xuan, Jiazhe Cai, Yuan Gao et al. Apr 01, 2025 DOI: 10.1002/adma.202417774

Abstract Amyloid fibrils have emerged as excellent templates and building blocks for the development of ordered functional materials with considerable potential in biomedical applications. Here, lysozyme amyloid fibrils (Lys‐AFs) are employed as templates for the in situ synthesis of ceria nanozymes (Lys‐AFs‐Ceria) with ultrafine dimensions, an optimized Ce 3+ /Ce 4+ ratio, and uniform distribution on the fibril surface, addressing the challenges of low catalytic efficiency and high susceptibility to aggregation typical of traditional methods. As a proof of concept, it is further applied Lys‐AFs‐Ceria to develop hydrogel/microneedle for treating bacteria‐infected diabetic wounds via non‐covalent interactions between polyphenols and amyloid fibrils incorporating glucose oxidase (GOX). The hydrogel/microneedle facilitates superoxide dismutase and catalase cascade catalysis by Lys‐AFs‐Ceria, and integrates GOX‐mediated glucose consumption, synergistically achieving glucose reduction, reactive oxygen species elimination, and hypoxia alleviation in the diabetic wound infection microenvironment. In addition to antibacterial properties and tissue regeneration promotion of Lys‐AFs scaffold, Lys‐AFs‐Ceria regulates macrophages polarization toward an anti‐inflammatory M2 state. Collectively, these attributes contribute to the enhanced efficacy of diabetic wound healing, with in vivo studies demonstrating increased healing efficiency following a single application, and more in general an effective strategy toward high‐catalytic and stable nanozymes.

In Situ Formation of Ripplocations in Hybrid Organic–Inorganic MXenes

Advanced Materials Francisco Lagunas, Chenkun Zhou, Di Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202411669

Abstract Inorganic–organic hybrid MXenes (h‐MXenes) are a family of 2D transition metal carbides and nitrides functionalized with alkylimido and alkylamido surface groups. Using cryogenic and room temperature scanning transmission electron microscopy (STEM) and electron energy‐loss spectroscopy (EELS), it is shown that ripplocations, a form of a fundamental defect in 2D and layered structures, are abundant in this family of materials. Furthermore, detailed studies of electron probe sample interactions, focusing on structural deformations caused by the electron beam are presented. The findings indicate that at cryogenic temperatures (≈100 K) and below a specific dose threshold, the structure of h‐MXenes remains largely intact. However, exceeding this threshold leads to electron beam‐induced deformation through ripplocations. Interestingly, the deformation behavior, required dose, and resultant structure are highly dependent on temperature. At 100 K, it is demonstrated that the electron beam can induce ripplocations in situ with a high degree of precision.

Functional Groups‐Regulated Organic Semiconductors for Efficient Artificial Photosynthesis of Hydrogen Peroxide

Advanced Materials Xiaohui Yu, Zhen Wei, Yuanshen Qin et al. Apr 01, 2025 DOI: 10.1002/adma.202501494

Abstract Hydrogen peroxide (H 2 O 2 ) is an environmentally friendly reagent, and organic semiconductors (OSCs) are ideal photocatalysts for the synthesis of H 2 O 2 due to their well‐defined molecular structure, strong donor‐acceptor interactions, and efficient charge separation. This review discusses the regulatory mechanisms of functional group modifications in tuning the photocatalytic performance of OSCs, highlighting the relationship between functional group structure and catalytic performance. For example, electron‐regulating groups, such as cyano and halogen, induce molecular dipoles, facilitating the migration of photogenerated electrons. Fluorine groups optimize the band structure and prolong carrier lifetime due to their high electronegativity. π‐Conjugated extension groups, like anthraquinone and thiophene, expand conjugation, improve visible light capture, and stabilize intermediates through redox cycles. Hydroxyl groups enhance surface hydrophilicity and promote H 2 O activation, while imine bond protonation adjusts charge distribution and improves selectivity and cycle stability. Multi‐active site functional groups, such as sulfonic acid and amide, accelerate reaction kinetics and inhibit H 2 O 2 decomposition. Functional groups enhance light absorption, charge separation, and surface reactions through electronic structure regulation, intermediate adsorption optimization, and proton‐electron transfer. Future work should integrate machine learning to identify optimal functional group combinations and develop green functionalization strategies for efficient H 2 O 2 photocatalyst synthesis.

Point Defects Enhance Cross‐Plane Thermal Conductivity In Graphite

Advanced Materials Ke Shen, Qi Ren, Lu Zhao et al. Apr 01, 2025 DOI: 10.1002/adma.202418569

AbstractPoint defects typically reduce the thermal conductivity (κ) of a crystal due to increased scattering of heat‐carrying phonons, a mechanism that is well understood and widely used to enhance or impede heat transfer in the material for different applications. Here an opposite effect is reported where the introduction of point defects in graphite with energetic particle irradiation increases its cross‐plane κ by nearly a factor of two, from 10.8 to 18.9 W m K−1 at room temperature. Integrated differential phase contrast imaging with scanning transmission electron microscopy revealed the creation of spiro interstitials in graphite by the irradiation. The enhancement in κ is attributed to a remarkable mechanism that works to the benefit of phonon propagation in both the harmonic and anharmonic terms: these spiro interstitial defects covalently bridge neighboring basal planes, simultaneously enhancing acoustic phonon group velocity and reducing phonon–phonon scattering in the graphite structure. The enhancement of κ reveals an unconventional role of lattice defects in heat conduction, i.e., easing the propagation of heat‐carrying phonons rather than impeding them in layered materials, inspiring their applications for thermal management in heavily radiative environments.

An Electron Transfer Mediated Mechanism for Efficient Photoreforming of Waste Plastics Using a Ni <sub>3</sub> S <sub>4</sub> /ZnCdS Heterojunction

Advanced Materials Zehao Ma, Shaoqi Zhan, Yule Zhang et al. Apr 01, 2025 DOI: 10.1002/adma.202416581

Abstract The oxidative degradation of plastics in conjunction with the production of clean hydrogen (H 2 ) represents a significant challenge. Herein, a Ni 3 S 4 /ZnCdS heterojunction is rationally synthesized and employed for the efficient production of H 2 and high‐selectivity value‐added chemicals from waste plastic. By integrating spectroscopic analysis techniques with density functional theory (DFT) calculations, a solely electron transfer‐mediated reaction mechanism is confirmed, wherein Ni 3 S 4 extracts electrons from ZnCdS (ZCS) to promote the spatial segregation of photogenerated electrons and holes, which not only facilitates H 2 production but also maintains the high oxidation potential of holes on the ZCS surface, favoring hole‐dominated plastic oxidation. Notably, the catalyst exhibited efficient H 2 production rates as high as 27.9 and 17.4 mmol g −1 h −1 , along with a selectivity of 94.2% and 78.3% in the liquid product toward pyruvate and acetate production from polylactic acid (PLA) and polyethylene terephthalate (PET), respectively. Additionally, carbon yields of 26.5% for pyruvate and 2.2% for acetate are measured after 9 h of photoreforming, representing the highest values reported to date. Overall, this research presents a promising approach for converting plastic waste into H 2 fuel and high‐selectivity valuable chemical products, offering a potential solution to the growing issue of “ White Pollution ”.

Charge‐Directed Nanocellulose Assembly for Interfacial Phase‐Transfer Catalysis

Advanced Materials Jaewon Shin, Bokgi Seo, Kyoungho Choi et al. Apr 01, 2025 DOI: 10.1002/adma.202418325

AbstractLiquid–liquid interfaces present unique opportunities for sustainable biphasic catalysis, yet concurrent amplification of molecular transport and reactivity at these boundaries remains challenging. Here it is demonstrated that high‐aspect‐ratio cationic nanocellulose (HNC+) spontaneously self‐assembles into mechanically robust nanomesh architectures at oil‐water interfaces through charge‐directed assembly. This assembly is driven by electrostatic attraction between the cationic nanofibers and the intrinsic negative charge at hydrophobic‐aqueous interfaces (σ ≈−0.3 C m−2), generating sufficient excess attractive force (ΔU ≈−1,200 kBT) to overcome image charge repulsion. The resulting nanomesh exhibits uniform “breathing holes” (≈34 nm) and exceptional stability under extreme conditions (pH 2–13, 1.8 m NaCl, and 90 °C). When applied to oxidative desulfurization, the system achieves &gt;90% thiophene removal under ambient conditions with exceptional atom economy (E‐factor &lt; 1.1) and catalyst stability through multiple cycles. This breakthrough strategy for interfacial engineering using renewable materials opens new possibilities for green chemical manufacturing while providing fundamental insights into charge‐mediated assembly at liquid interfaces. These findings establish a viable pathway for sustainable heterogeneous catalysis that aligns with circular economy principles.

Organic Gradient Homojunction via D‐A Engineering Enables Photoelectric/Photothermal Dual‐Assisted Catalysis Toward Full Spectrum Light‐Coupled Low‐Temperature Seawater Batteries

Advanced Materials Yi Lin, Fan Yang, Xiaotong Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202415608

Abstract Coupling solar into metal‐air batteries represents an appealing paradigm for storing intermittent solar energy and boosting device energy efficiency. Current solar‐coupled metal‐air systems rely on UV or visible light harvesting and suffer from inferior charge separation ability and limited solar utilization. Additionally, sunlight action behavior/mechanism in some useful scenarios (seawater electrolytes, low‐temperature) is underexplored. Herein, through gradient homojunction design via donor‐acceptor (D‐A) engineering, it exploits a novel full‐spectrum‐responsive polymer homojunction photoelectrode (PGH) for sunlight‐coupled seawater‐electrolyte‐based Zn/Na‐air batteries (Zn‐SWAB/Na‐SWAB) with boosted sunlight utilization and energy efficiency at lower temperatures. By stacking three pre‐designed analogous [A 1 ‐D 1 ] m ‐[A 1 ‐D 2 ] n copolymers with gradient energy‐levels and rich heterocycles, PGH integrates separate metal‐free active sites for oxygen reduction/evolution reaction (ORR/OER), efficient photothermal effect with full‐spectrum‐absorption, and superior photoelectric effect with high charge‐separation efficiency. Thus, PGH under simulated‐sunlight produces remarkably‐enhanced photocurrent up to 3.2 and 21.4 times during ORR/OER in near‐neutral electrolytes. This endows sunlight‐coupled PGH‐enabled Zn‐SWAB and Na‐SWAB with low voltage gaps of 0.08/0.25 V at room temperature, and 0.21/0.43 V at 0 °C – both of which surpass most reported room‐temperature results. Their energy efficiencies (84.6%/86.8%) at 0 °C even approach their room‐temperature counterparts (93.9%/92.3%). Mechanistic studies reveal photoelectric/photothermal dual‐promoted bidirectional oxygen catalysis responsible for intriguing performance.

p‐π Conjugated Covalent Organic Frameworks Expedite Molecular Triplet Excitons for H <sub>2</sub> O <sub>2</sub> Production Coupled with Biomass Upgrading

Advanced Materials Fan Zhang, Ximeng Lv, Haozhen Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202502220

Abstract High‐efficiency production of triplet states in covalent organic framework photocatalysts is crucial for high‐selectivity oxygen (O 2 ) reduction to hydrogen peroxide (H 2 O 2 ). Herein, fluorine and partial fluorine atoms are incorporated into an olefin‐linked triazine covalent organic framework (F‐ol‐COF and HF‐ol‐COF), in which the adjacent fluorine (F) atoms‐olefinic bond forms p‐π conjugation that induces spin‐polarization under irradiation, thus expediting triplet excitons for activating O 2 to singlet oxygen ( 1 O 2 ) and contributing to a high H 2 O 2 selectivity (91%). Additionally, the feasibility of coupling H 2 O 2 production with the valorization of 5‐hydroxymethylfurfural (HMF) is exhibited. The F‐ol‐COF demonstrates a highly stable H 2 O 2 yield rate of 12558 µmol g −1 h −1 with the HMF‐to‐functionalized furan conversion yield of 95%, much higher than the partially fluorinated COF (HF‐ol‐COF) and the non‐fluorinated COF (H‐ol‐COF). Mechanistic studies reveal that F‐incorporation promotes charge separation, intensifies the Lewis acidity of the carbon atoms on the olefinic bond as active sites for O 2 adsorption, and provides highly concentrated holes at the triazine unit for HMF oxidation upgrading. This study suggests the attractive potential of rational design of porous‐crystalline photocatalysts for high‐efficiency photocatalytic O 2 reduction to H 2 O 2 and biomass upgrading.

Hierarchical‐Structured RGO@EGaIn Composites as Advanced Self‐Healing Anode for Room‐Temperature Liquid Metal Battery

Advanced Materials Cheng‐Hao Huang, Xiaolong Yang, Si‐Qi Gong et al. Apr 01, 2025 DOI: 10.1002/adma.202419060

Abstract Gallium‐based liquid metal (LM) has emerged as a promising candidate anode material for lithium‐ion batteries (LIBs), exhibiting high theoretical capacity, excellent electrode kinetics, and unique self‐healing ability. However, the liquid‐solid‐liquid transition during the electrochemical reactions can disrupt the solid electrolyte interphase (SEI) and damage the structural integrity, ultimately limiting the cycling stability. Here, hierarchical‐structured reduced graphene oxide coated eutectic gallium‐indium liquid metal particles (RGO@EGaIn LMPs) are synthesized using a facile self‐assembly strategy. The customized RGO@EGaIn electrode demonstrated impressive performance in both half‐cell and full‐cell configurations for LIBs. The morphological and phase transitions of RGO@EGaIn LMPs during the lithiation/delithiation processes are uncovered by real‐time in situ transmission electron microscopy tests. It is clarified that the presence of RGO in the hierarchical structure buffers the volume expansion of LMPs from ≈160% to 125% and provides a fast pathway for the rapid transfer of ions and electrons during the electrochemical reaction, which effectively enhances the electrochemical performance of the electrode. This work introduces a straightforward and effective method for preparing high‐performance room‐temperature liquid metal electrodes, representing a significant step forward toward the commercial application of liquid metal batteries.

Organic Photoelectrochemical Multisensory Integration

Advanced Materials Yu‐Ting Huang, Zheng Li, Cheng Yuan et al. Apr 01, 2025 DOI: 10.1002/adma.202503030

AbstractNeuromorphic perception capable of multisensory integration (MSI) in electrolytes is important but remains challenging. Here, the aqueous implementation of artificial MSI is reported based on the newly emerged organic photoelectrochemical transistor (OPECT) by representative visual (light)‐gustatory (sour) perception. Under the co‐modulation of light and H+/OH−, multisensory synaptic plasticity and several typical MSI characteristics are mimicked, including “super‐additive response,” “inverse effectiveness effect” and “temporal congruency.” To demonstrate its potential usage, different types of multisensory associative learning and corresponding reflex activities are further emulated. The chemical MSI system is also utilized to control artificial salivation by a closed loop of real‐time perception, processing, integration, and actuation to emulate the biological responses toward external stimuli. In contrast to previous solid‐state operations, this work offers a new strategy for developing neuromorphic MSI in aqueous environments that are analogous to those in biology.

Electrochemical Synthesis of 2D Polymeric Fullerene for Broadband Photodetection

Advanced Materials Yuxuan Zhang, Yifan Xie, Hao Mei et al. Apr 01, 2025 DOI: 10.1002/adma.202416741

Abstract 2D polymeric fullerene scaffolds, composed of covalently bonded superatomic C 60 nanoclusters, are emerging semiconductors possessing unique hierarchical electronic structures. Hitherto their synthesis has relied on complex and time‐consuming reactions, thereby hindering scalable production and limiting the technological relevance. Here, the study demonstrates a facile electrochemical exfoliation strategy based on the intercalation and expansion of a layered fullerene superlattice, to produce large size (≈52.5 µm 2 ) and monolayer thick 2D polymeric C 60 with high exfoliation yield (≈83%). In situ reduction of solvated protons (H + ) weakens the interlayer interactions thereby promoting the rapid and uniform intercalation of tetra‐n‐butylammonium (TBA + ), ensuring gram‐scale throughput and high structural integrity of exfoliated 2D polymeric C 60 . As a proof of concept, the solution‐processed 2D polymeric C 60 nanosheets have been integrated into thin‐film photodetectors, exhibiting a broad spectral photoresponse ranging from 405 to 1200 nm, with a peak photocurrent at 850 nm and a stable response time. This efficient and scalable exfoliation method holds great promise for the advancement of multifunctional composites and optoelectronic devices based on 2D polymeric C 60 .

Efficient H <sub>2</sub> O <sub>2</sub> Electrosynthesis in Acidic media via Multiscale Catalyst Optimization

Advanced Materials Jaehyuk Shim, Jaewoo Lee, Heejong Shin et al. Apr 01, 2025 DOI: 10.1002/adma.202418489

Abstract Electrochemically generating hydrogen peroxide (H 2 O 2 ) from oxygen offers a more sustainable and cost‐effective alternative to conventional anthraquinone process. In alkaline conditions, H 2 O 2 is unstable as HO 2 − , and in neutral electrolytes, alkali cation crossover causes system instability. Producing H 2 O 2 in acidic electrolytes ensures enhanced stability and efficiency. However, in acidic conditions, the oxygen reduction reaction mechanism is dominated by the inner‐sphere electron transfer pathway, requiring careful consideration of both reaction and mass transfer kinetics. These stringent requirements limit H 2 O 2 production efficiency, typically below 10–20% at industrial‐relevant current densities (&gt;300 mA cm −2 ). Using a multiscale approach that combines active site tuning with macrostructure tuning, this work presents an octahedron‐like cobalt structure on interconnected hierarchical porous nanofibers, achieving a faradaic efficiency exceeding 80% at 400 mA cm −2 and stable operation for over 120 h at 100 mA cm −2 . At 300 mA cm −2 , the optimized catalyst demonstrates a cell potential of 2.14 V, resulting in an energy efficiency of 26%.

Universal Prophylactic Antitumor Vaccination Using Stem Cell Membrane‐Coated Nanoparticles

Advanced Materials Nishta Krishnan, Jiarong Zhou, Animesh Mohapatra et al. Apr 01, 2025 DOI: 10.1002/adma.202501616

AbstractCancer vaccines are a promising immunotherapeutic modality that function by training the immune system to recognize and destroy malignant cells. As tumor‐specific and tumor‐associated antigens generally cannot be identified until after a tumor has already been established, these vaccines must be applied therapeutically when strong immunosuppressive mechanisms are already in place. Building upon previous work using cell membrane coating nanotechnology, the development of a broad‐spectrum prophylactic cancer nanovaccine that consists of induced pluripotent stem cell (iPSC) membrane coated around an adjuvant‐loaded nanoparticle core is shown. The resulting nanostructure is capable of presenting iPSC‐derived oncofetal antigens, which are oftentimes re‐expressed on cancer cells but lowly present on normal adult tissues. When administered in vivo, the iPSC membrane‐coated nanoparticles are highly immunostimulatory and elicit strong antitumor immunity that can successfully inhibit the growth of multiple tumor types, including five different murine tumor models and in a bilaterial heterogeneous tumor model. Overall, this work demonstrates an effective approach for engineering iPSC‐based nanovaccines that can be applied broadly to prevent cancer before it occurs.

Preventing Benzoquinone‐Based Catalyst Aggregation Enables the One‐Step Synthesis of Highly Conductive Poly(benzodifurandione) without Post‐Reaction Purification

Advanced Materials Jun‐Da Huang, Qifan Li, Qingqing Wang et al. Apr 01, 2025 DOI: 10.1002/adma.202502426

Abstract Conductive polymers have become crucial in advancing various electronic applications. While p‐type materials like poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) are widely used and produced at scale, the development of high‐performance n‐type polymers has lagged due to challenges in synthesis and scalability. In this work, a novel method is introduced to synthesize the highly conductive n‐type polymer poly(benzodifurandione) (PBFDO) using α‐tocopherylquinone (α‐TQ) as a catalyst. This approach eliminates the need for post‐reaction dialysis, a major obstacle to large‐scale PBFDO production. By preventing catalyst aggregation, high electrical conductivity (&gt;1320 S cm −1 ) is achieved, which remains stable in air for over 180 d, significantly simplifying the process. The α‐TQ‐synthesized PBFDO also exhibits excellent thermoelectric properties, with a power factor exceeding 100 µW m −1 K −2 , placing it among the highest‐performing n‐type thermoelectric polymers. Additionally, residual α‐TQ acts as a plasticizer, reducing the elastic modulus by over tenfold while maintaining high conductivity, making this material suitable for mechanically compliant electronics. Similarly, residual α‐TQ lowers the thermal conductivity of PBFDO by more than an order of magnitude. The process is scalable, as demonstrated by producing high‐conductivity ink in a 20 L reactor. This work presents an efficient and sustainable approach for large‐scale n‐type polymer production.

Correction to Supporting Information for Walters et al., Identification of FSH-regulated and estrous stage–specific transcriptional networks in mouse ovaries

Proceedings of the National Academy of Sciences Apr 01, 2025 DOI: 10.1073/pnas.2504347122

Radical Molecular Network‐Buffer Minimizes Photovoltage Loss in FAPbI₃ Perovskite Solar Cells

Advanced Materials Mubai Li, Yang Jiang, Shaoyu Chen et al. Apr 01, 2025 DOI: 10.1002/adma.202417289

Abstract Formamidinium lead iodide (FAPbI₃) perovskite solar cells (PSCs) hold immense potential for high‐efficiency photovoltaics, but maximizing their open‐circuit voltage ( V OC ) remains challenging. Targeting the inherently stable {111} c ‐dominant facets is a promising approach for enhancing stability, but their formation typically suffers from high defect densities and disordered growth. This study introduces a novel approach using an in situ polymerizable radical molecule, ATEMPO, as an additive to address these issues. ATEMPO preferentially interacts with the {111} c perovskite facets, guiding their growth and forming a “radical molecular network‐buffer” upon polymerization. The network effectively mitigates lattice strain, suppresses defect formation, enhances charge transport via redox‐mediated hopping, and provides a hydrophobic barrier, significantly improving moisture resistance. This strategy yields high‐quality, {111} c ‐oriented FAPbI₃ films, leading to a champion PCE of 25.28% with a remarkably high V OC of 1.203 V, corresponding to an energy loss ( E loss ) of only 0.297 eV, among the highest V OC reported for FAPbI₃‐based PSCs. Furthermore, a mini‐module fabricate with an active area of 12.5 cm 2 achieve a high PCE of 21.39%. the work paves the way for developing high‐performance, stable PSCs with minimized photovoltage loss. Furthermore, it offers a promising strategy to enhance device longevity and address environmental concerns.