Browse Articles

Discover research articles across all indexed journals

Association between Life’s essential 8 and mortality among individuals with hypertension

Scientific Reports Min Lin, Xiongbiao Lin, Wenwen Chen et al. Feb 17, 2025 DOI: 10.1038/s41598-025-89773-9

Dual-channel fiber-optic biosensors based on LSPR and SPR for the trace detection of rabies virus

Applied Physics Letters Juan He, Houren Pan, Luwei Feng et al. Feb 17, 2025 DOI: 10.1063/5.0253941

In this paper, a transmissive dual-channel fiber-optic biosensor based on local surface plasmon resonance (LSPR) and surface plasmon resonance (SPR) is designed for the simultaneous detection of rabies virus antibody and temperature. In the traditional dual-channel SPR sensor structure, it is necessary to coat different metal films on two channels to obtain two independent SPR signals in one probe. In this work, the dopamine hydrochloride was used to separate two resonance peaks. Sensing channel 1 is used as an immunosensing road by using the LSPR effect, coating its surface with gold nanoparticles (AuNPs)/IRMOF-3/thiomalic acid and adsorbing rabies virus antigens to enhance the loading of biomolecules on the surface of the sensor and the immune response. The sensing channel 2 adopts a silver film to excite the SPR effect, then the position of the SPR resonance peak is shifted back by dopamine hydrochloride, and, finally, a layer of polydimethylsiloxane is coated as a temperature sensing channel. The results show that the sensitivity of the sensor is 0.504 nm/°C in the temperature range of 30–35 °C, and it has good temperature stability. The high sensitivity detection of rabies virus was achieved in the range of 0.1–103 pg/ml. The sensitivity and detection limit are 3.065 nm/(log(pg/ml)) and 0.234 pg/ml, respectively. It performed well in the clinical sample detection. The sensor has a good prospect in the clinical detection of rabies virus.

A class of entanglement witnesses and a realignment-like criterion

Scientific Reports Vahid Jannesary, Vahid Karimipour, Dariusz Chruściński Feb 17, 2025 DOI: 10.1038/s41598-025-90528-9

An AlN/Al<i>x</i>Ga1-<i>x</i>N/GaN graded channel HEMT with enhanced power and linearity performance

Applied Physics Letters Xiang Du, Min-Han Mi, Peng-Fei Wang et al. Feb 17, 2025 DOI: 10.1063/5.0245073

In this work, an AlN/AlxGa1-xN/GaN graded channel HEMT (AlN. GC HEMT) with enhanced power and linearity performance has been proposed. With the adoption of a strong-polarized AlN barrier and a graded AlxGa1-xN channel, a current density of 1806 mA/mm and a transconductance (Gm) gate voltage swing (GVS-Gm) of 7 V were gained. At 3.6 GHz load pull measurements with a drain voltage (VDS) of 8 V, the AlN. GC HEMT exhibited a maximum output power density (Pout) of 2.2 W/mm. Two-tone intermodulation distortion measurement further revealed an output third-order intercept point (OIP3) of 35.5 dBm and a corresponding linearity figure of merit (OIP3/PDC) of 11.2 dB. The improved performance can be attributed to the hybrid 2DEG and 3DEG distribution in the channel, where the high density 2DEG contributes to a large output capacity, and the smooth 3DEG facilitates a sustained and stable charge accumulation with bias variation. These results indicate the potential of AlN. GC HEMT in 5G applications that target high power density and high linearity.

Family history and acquired risk factors for pelvic organ prolapse: a case–control study in Japan

Scientific Reports Asuka Ashikari, Katsumi Kadekawa, Akihiro Tokushige et al. Feb 17, 2025 DOI: 10.1038/s41598-025-90202-0

Interplay between magnetization compensation temperature and thickness in ferrimagnetic CoGd alloy films

Applied Physics Letters Junshuai Wang, Bingxin Li, Yipeng An et al. Feb 17, 2025 DOI: 10.1063/5.0245463

In this study, we explore the interplay between magnetization compensation temperature (Tcom) and thickness in ferrimagnetic CoGd alloys. Temperature-dependent anomalous Hall effect shows that the thickness of CoGd alloys can cause a 160 K shift in Tcom. Element-mapping image measurements display that the concentration of CoGd alloys remains constant regardless of the thickness, while magnetic property measurements indicate that the saturation magnetization (Ms) decreases as the thickness increases. A microstructure constructed by non-coplanar spin is used to account for the modulation of Tcom and Ms with the thickness. Density functional theory offers a microscopic mechanism where the difference in exchange coupling strength between Gd-Co moments should be responsible for thickness-controlled Tcom. Our findings reveal potential opportunities for the use of RE-TM ferrimagnetic films in the development of energy efficient nonvolatile spintronic devices.

Seagrass-rafted large benthic foraminifera transported into the deep Red Sea

Scientific Reports Marleen Stuhr, Hildegard Westphal, Fabio Marchese et al. Feb 17, 2025 DOI: 10.1038/s41598-025-90047-7

Abstract Large shallow-marine foraminifera tests occur in deep-sea carbonate sediments of the northern Red Sea as a minor but recurring component among the remains of otherwise pelagic and deep-marine benthic biogenic assemblages. In this study of sediments recovered along the northern shore of Saudi Arabia, the symbiont-bearing taxa Sorites variabilis, S. orbiculus, Amphisorus hemprichii, Amphistegina lobifera, A. lessonii and A. radiata were identified in samples from between 430 to 1,000 m depth. These foraminifera are dwelling in shallow-water environments, associated with coral reefs and seagrass habitats. The seemingly erratic occurrence of photosymbiotic benthic organisms in deep-sea sediments was explained by the finding of such foraminifera tests along with seagrass (e.g., Halophila leaves) and macroalgae remains in pristine preservational states in the sediment of the Umluj brine pool below ~ 638 m depth. This indicates a passive transport process by rafting attached to floating macrophytes to these off-platform settings. The abundant seagrass and oceanographic conditions along the Arabian Peninsula may facilitate the transport of epiphytes and associated taxa offshore. Such long-distance transport mechanisms could further contribute to the rapid (co-)dispersal of some of these organisms into new habitats. Passive rafting should thus be considered in interpretation of sedimentary records and biogeographic patterns.

An automatic energy storage and release high-performance micro-harvester with steady-state output for low-frequency random energy harvesting

Applied Physics Letters Xiaoguang Song, Zhiqiang Lan, Kunru Li et al. Feb 17, 2025 DOI: 10.1063/5.0250922

Harvesting wideband and random vibration energy in the vehicle environment is a promising route to power mobile electronic devices. Conventional energy harvesters cannot realize steady-state output, making the energy management circuit design difficult. This work presents an electromagnetic harvester with a counterweight unit, a gearbox, and a generator, which can be adapted to wideband automatic energy storage and quantized output release. The counterweight unit with the low-frequency response can effectively sense the weak vibration. The coil spring in the energy storage gear train is in particular used to store low-frequency random vibration energy in the environment and release the energy stored by the coil spring by switching the gear train. Finally, the coil spring drives the generating gear train to realize the steady-state output of mechanical energy to electrical energy. At a frequency of 2.5 Hz and an acceleration of 0.4 g, the average output power of the automatic energy storage and steady-state output release energy harvester (ASSR) by using a coil spring to first store energy and then quantize the output is 114.5 times higher than that of the method of continuous generating without using a coil spring. The ASSR's energy output can charge the lithium battery (3.7 V, 40 mAh) from 2.6 to 3.716 V during a 60 km ride at an average speed of 12.7 km/h while powering the mobile phones and Bluetooth devices continuously through the energy management circuit. The strategy shows the great potential of micro-energy harvester in various wideband random vibration environments for powering electronics.

Medicinal plants used by local communities in southern Fars Province, Iran

Scientific Reports Saeideh Ghafouri, Roja Safaeian, Gholamabbas Ghanbarian et al. Feb 17, 2025 DOI: 10.1038/s41598-025-88341-5

Strain-engineering the lattice thermal conductivity of 2D kagome silica

Applied Physics Letters Yang Wang, Xiaoying Wang, Yuzhou Hao et al. Feb 17, 2025 DOI: 10.1063/5.0253235

Two-dimensional (2D) materials exhibit a significant potential for thermal management and thermoelectric energy generation due to their unique electrical and thermal transport properties that enhance performance. Their notable stretchability indicates the feasibility of employing strain engineering to optimize both electronic and thermal properties. In this study, we apply first-principles computational methods and the Boltzmann transport equation to explore the impact of strain and higher-order anharmonicity from four-phonon (4ph) scattering on the thermal conductivity (κL) of 2D silica. Our results indicate that under a small strain of 3%, κL increases due to the decrease in the phonon scattering rate and phonon phase space. However, under larger strains (8%), κL decreases significantly due to an increased phonon–phonon scattering rates. These findings provide deeper insights into the thermal transport behavior of 2D silica, paving the way for future research in strain and phonon engineering in 2D materials.

Intelligent evaluation of coal mine solid filling effect using fuzzy logic and improved D-S evidence theory

Scientific Reports Zihang Zhang, Shangqing Yang, Yang Liu Feb 17, 2025 DOI: 10.1038/s41598-025-88913-5

High-pressure high-temperature synthesis of cubic B-C-N compounds with high thermal stability

Applied Physics Letters Baoyin Xu, Yue Zhou, Yaqi She et al. Feb 17, 2025 DOI: 10.1063/5.0250854

Exploring superhard materials is of great significance in materials research. Ternary B-C-N superhard compounds exhibit a superior thermal stability to diamond, with hardness surpassing cubic boron nitride. However, synthesizing cubic B-C-N compounds is challenging, and few studies have been reported on their high-temperature oxidation resistance, impeding their potential applications. In this study, cubic B-C-N compounds (c-BCN) were synthesized using the high-pressure high-temperature synthesis method at 10 GPa and 1530 °C, half the reported pressure and one-quarter lower than the reported temperature. The thermal stability of the obtained c-BCN compound was examined. The results indicated that the air oxidation temperature of c-BCN was as high as 1200 °C, suitable for high-speed cutting of hardened steels. This study provided a production method of cubic B-C-N superhard compounds and extended their potential applications to milling/machining.

Underlying mechanism behind the dynamic mechanical behavior of sandstone with varying moisture content under medium speed impact

Scientific Reports Fanjie Kong, Xiaobin Li, Xian’e Peng et al. Feb 17, 2025 DOI: 10.1038/s41598-025-89992-0

Experimental demonstration of synchronization between two quantum dot passively mode-locked laser frequency combs utilizing bidirectional optical coupling

Applied Physics Letters Daniel Bita, Iraklis Simos, Christos Simos Feb 17, 2025 DOI: 10.1063/5.0246902

Two monolithic edge-emitting passively mode-locked InAs/InGaAs semiconductor quantum dot lasers generating ps optical pulses at repetition rates of 10 GHz and optical frequency combs centered at 1260 nm are mutually coupled in an all-optical passive synchronization experiment. The two lasers, with different free-running repetition rates, are coupled through a long delay fiber path, they synchronize, and generate optical pulse trains with identical repetition rates in a wide range of experimental conditions (optical frequency, optical delay, and coupling strength). The common repetition rate can be easily fine-tuned with the control of the external coupling path length. In synchronized state, both lasers operate with significantly reduced timing jitter with respect to their free-running values. Finally, under specific conditions, the repetition rate locking is accompanied by partial mutual coherence between the lasers, as indicated by the formation of interferometric fringes.

The evolution, variation and expression patterns of the annexin gene family in the maize pan-genome

Scientific Reports Xin Liu, Minghu Zhang, Xin Zhao et al. Feb 17, 2025 DOI: 10.1038/s41598-025-89119-5

A perspective on mechanism of heat transfer and performance optimization in advanced thermal interface materials

Applied Physics Letters Chen Liang, Jingtao Hong, Cheng Wan et al. Feb 17, 2025 DOI: 10.1063/5.0250727

In recent years, thermal interface materials (TIMs) have garnered increasing attention in the field of thermal management for electronic devices. By effectively bridging the gap between electronic components and heat sinks, these materials significantly enhance heat transfer efficiency. This paper systematically reviews and analyzes the mechanisms, and the influencing factors associated with TIMs composed of graphene, carbon nanotubes, MXene, boron nitride compounds, and metal nanowires over recent years. Additionally, it delves into the challenges faced by these materials and explores its future research directions in thermal management. Future research endeavors are anticipated to focus on innovative designs for thermal conductivity networks in order to achieve further enhancements in the TIMs performance, ultimately paving the way for their practical application and commercialization.

Temporal action localisation in video data containing rabbit behavioural patterns

Scientific Reports Semyon Ilin, Julia Borodacheva, Ildar Shamsiev et al. Feb 17, 2025 DOI: 10.1038/s41598-025-89687-6

Non-ergodic-induced negative differential piezoresponse in relaxor ferroelectrics

Applied Physics Letters C. Saguy, B. Kowalski, A. Sehirlioglu et al. Feb 17, 2025 DOI: 10.1063/5.0243964

Relaxor ferroelectrics exhibit a unique competition between long-range and short-range interactions that can be tuned electrically, which prioritizes these materials in a broad range of electro-mechanical energy-conversion technologies, including biomedical imaging and electric-charge generators. Here, we demonstrate differential negative piezoresponse by utilizing the short-range interactions in relaxor ferroelectrics. The effect was observed over a broad temperature range with local piezoresponse spectroscopy in unpoled samples, while no negative piezoresponse was observed when the material was pre-poled. These measurements suggest that the effect, which is promising for power-generation applications, originates from non-ergodic behavior. Complementary macroscale impedance and dielectric constant measurements as a function of temperature and frequency supported the mesoscopic findings. Bearing in mind the direct relationship between piezoresponse and capacitance, relaxor ferroelectrics appear as an excellent platform for the emerging technology of low-power negative-capacitance transistors.

Rendering the European neutron research landscape

Scientific Reports Evgenii Velichko, Hartmut Abele, David J. Barlow et al. Feb 17, 2025 DOI: 10.1038/s41598-025-88099-w

Prediction of toroidal dipole resonance in dielectric metasurface by deep learning

Applied Physics Letters Yangyang Yu, Shaojun You, Ying Zhang et al. Feb 17, 2025 DOI: 10.1063/5.0252353

Toroidal dipole (TD) resonance is a promising method for enhancing light–matter interactions, offering significant potential in photonic device design. While numerical simulations are commonly used to study TD resonances, they are computationally expensive and time consuming. In this study, we propose deep learning strategies to predict TD resonances induced by Brillouin zone folding. A fully connected neural network is developed to predict transmission mapping, transmission spectra, multipole scattering, and TD components. Comparison with numerical simulations shows that the neural network predicts TD resonance efficiently and accurately. Experimental validation through fabricated samples further confirms the strong TD response. Our work presents an effective tool for quickly and precisely exploring nanophotonic properties and offers a promising approach for predicting high-quality factor TD resonators.