Browse Articles

Discover research articles across all indexed journals

Analysis of social media language reveals the psychological interaction of three successive upheavals

Scientific Reports Steven Mesquiti, Sarah Seraj, Andreas H. Weyland et al. Feb 17, 2025 DOI: 10.1038/s41598-025-89165-z

Dual-metal hybrid metasurface for liquid-tunable infrared polarization-selective perfect absorption

Applied Physics Letters Chenjie Dai, Qianqian Zhou, Tianyu Liu et al. Feb 17, 2025 DOI: 10.1063/5.0247576

Nanostructure-based metasurfaces provide a promising route for arbitrarily manipulating light waves, especially versatile absorption. Although various meta-absorbers have been studied for perfect absorption, it remains a challenge to achieve high-contrast polarization-dependent absorption with dynamic tunability. Here, a dual-metal hybrid metasurface is demonstrated for polarization-selective perfect absorption and reflection with liquid tuning capabilities in the infrared band. Based on the metal–insulator–metal architecture, the metasurface composed of Al/Ti nanostrips enables an intense absorption resonance at x-polarization and reflects light as a mirror at y-polarization, thus acting as a high-performance linear polarizer. The absorption peak wavelength can be continuously tailored from 1200 to 1850 nm with an average absorption > 99% by scaling the unit-cell period of metasurfaces. Furthermore, the perfect absorption wavelength of the metasurface exhibits a large range switch (>750 nm) through immersion tuning, and its absorption remains above 99.5%. The proposed dual-metal hybrid metasurface for liquid-tunable absorption can promote practical technologies of dynamic polarizers, photodetectors, and optical imaging.

A lightweight coal mine pedestrian detector for video surveillance systems with multi-level feature fusion and channel pruning

Scientific Reports Bei Jing Xie, Heng Li, Zheng Luan et al. Feb 17, 2025 DOI: 10.1038/s41598-025-87157-7

Enhancement to the conductivity of surface transfer-doped (111) diamond through thermochemical surface etching

Applied Physics Letters S. A. Yianni, A. Stacey, D. L. Creedon et al. Feb 17, 2025 DOI: 10.1063/5.0245506

The use of a transition metal catalyzed thermochemical etching method for improving the carrier transport properties of the near-surface two-dimensional (2D) hole gas in surface transfer-doped hydrogen-terminated (111) diamond is demonstrated. Using Ni0.8Cr0.2 films deposited and annealed to a temperature of 900 °C, with up to three etch cycles, preferential (111) surface etching produces large terraces exceeding 10 μm in size with a surface microroughness, σRMS2λ, that is two orders of magnitude lower than for the pre-etched (111) surface. Magnetotransport measurements on hydrogen-terminated Hall bars engineered on the pre- and post-etched surfaces and rendered conductive by the adsorbed water layer formed on exposure to ambient conditions demonstrate that this etching causes an improvement in the hole mobility by an order of magnitude, resulting in a measured sheet resistivity of 1.04  kΩ/sq at a temperature of 4.2 K without gating.

A method for the identification of lactate metabolism-related prognostic biomarkers and its validations in non-small cell lung cancer

Scientific Reports Weiyang Yang, Miao Gu, Yabin Zhang et al. Feb 17, 2025 DOI: 10.1038/s41598-025-85620-z

Investigating the interplay between spin polarization and magnetic damping in CoxFe80−xB20 for magnonics applications

Applied Physics Letters Lorenzo Gnoatto, Thomas Molier, Jelte J. Lamberts et al. Feb 17, 2025 DOI: 10.1063/5.0254050

For magnonics and spintronics applications, the spin polarization (P) of a transport current and the magnetic damping (α) play a crucial role, e.g., for magnetization dynamics and magnetization switching applications. In particular, P in a glassy (amorphous) 3d transition ferromagnet such as CoFeB and α are both strongly affected by s−d scattering mechanisms. Hence, a correlation can be expected, which is a priori difficult to predict. In this work, P and α are measured using current-induced Doppler shifts using propagating spin wave spectroscopy and broadband ferromagnetic resonance techniques in blanket films and current-carrying CoxFe80−xB20 alloy microstrips. The measured P ranges from 0.18 ± 0.05 to 0.39 ± 0.05, and α ranges from (4.0 ± 0.2)·10−3 to (9.7 ± 0.6)·10−3. We find that for increasing P, a systematic drop in α is observed, indicating an interplay between magnetic damping and the spin polarization of the transport current, which suggests that interband scattering dominates in CoxFe80−xB20. Our results may guide future experiments, theory, and applications in advancing spintronics and metal magnonics.

Design and implementation of PLA/GO/metal oxide composites for CO2 sensing application

Scientific Reports Khaled S. Amin, Mohamed M. Yassin, Yahia M. Abdallah et al. Feb 17, 2025 DOI: 10.1038/s41598-025-89337-x

Abstract This study investigates the modification of polylactic acid (PLA) by the incorporation of graphene oxide (GO) and metal oxides (ZnO and CuO), with the aim of developing efficient CO₂ sensors. Key properties, including total dipole moment (TDM), energy gap (ΔE), molecular electrostatic potential (MESP), and density of states (DOS), were calculated using density functional theory (DFT) to gain insight into the interactions between the composites and CO₂ gas. Experimental techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and optical confocal microscopy were used to validate the material composition and bonding mechanisms. The analysis revealed the presence of SiO₂ impurities in the PLA matrix, which could potentially affect the sensing behavior of the composite. The composites demonstrated effective CO₂ sensing capabilities in experimental tests. This combined theoretical and experimental approach demonstrates that PLA/GO/metal oxide composites offer significant potential for sustainable CO₂ sensing, contributing to air quality monitoring and greenhouse gas regulation.

Control of impurity incorporation into CVD diamond synthesized with <i>tert</i>-butylphosphine for quantum applications

Applied Physics Letters Riku Kawase, Hiroyuki Kawashima, Hiromitsu Kato et al. Feb 17, 2025 DOI: 10.1063/5.0243639

Nitrogen-vacancy (NV) centers in phosphorus-doped diamond have potential applications in quantum technologies because their electron spin has the longest spin coherence time among those in solid systems at room temperature (RT) and because their negative charge state is more stable than that in undoped diamond. However, the conventional phosphorus source, phosphine, is toxic and explosive; a safer precursor is therefore preferred. We consequently attempted to synthesize phosphorus-doped diamonds using tert-butylphosphine (TBP), which has lower toxicity and explosivity than phosphine. However, controlling phosphorus incorporation during doping with TBP is difficult because it condenses easily and remains in the synthesis reactor due to its low boiling point. Here, we report controlling the incorporation of impurities by optimizing the synthesis conditions, such as the synthesis pressure. Comparing diamonds synthesized at 15 and 50 kPa reveals that the phosphorus concentration was reduced by 93% and the nitrogen concentration by 72% in the diamond synthesized at 50 kPa. For diamonds prepared under optimized conditions in our synthesis reactor, a long spin coherence time (T2 = 2.23 ms) for NV centers with almost perfect selective alignment of the NV axes was achieved. The T2 was comparable to the longest reported length for NV centers in a sample synthesized with phosphine, indicating that TBP is a promising phosphorus source for obtaining NV centers with excellent properties. We also achieved high electron mobility [580 cm2/(V s) at RT] in diamonds synthesized with TBP; this value is comparable to that for diamonds synthesized with phosphine.

Revealing large-scale surface subsidence in Jincheng City’s mining clusters using MT-InSAR and VMD-SSA-LSTM time series prediction model

Scientific Reports Fan Yang, Menghui Zhi, Yan An Feb 17, 2025 DOI: 10.1038/s41598-025-88524-0

Voltage-controlled strain-mediated elliptical micro-magnetic motors for single magnetic bead manipulation

Applied Physics Letters Pankaj Pathak, Vinit Kumar Yadav, Dhiman Mallick Feb 17, 2025 DOI: 10.1063/5.0252514

Effective manipulation of magnetic beads (MBs) with dimensions similar to single cells is crucial for advancing clinical and diagnostic technologies. Traditional methods like optical tweezers and dielectrophoresis often require complex setups, making them less suitable for scalable laboratory-on-a-chip (LOC) systems. While strain-mediated magnetoelectric (ME) micro-motors offer a promising alternative, they are limited by a 45° rotation when using planar electrode systems, the complexity of multi-electrode systems for rotations beyond 45°, and the lower thermal stability of symmetrical ferromagnetic (FM) rings or disks. This work introduces a ME-based LOC device that incorporates strain-mediated micro-magnetic motors, utilizing shape-anisotropic FM elliptical rings on a ferroelectric substrate to achieve MB rotations up to 90° experimentally with a simple planar electrode system. The inherent high thermal stability of elliptical FM rings enables this rotation without the need for multi-electrode designs. Micromagnetic simulations are employed to identify the optimal elliptical ring structures that generate the localized stray magnetic fields necessary for trapping and rotating MBs. Effective single MB trapping with optimized MB concentrations and flow rates is demonstrated with 40% capture probability. Under an applied electric field of 0.8 MV/m, a 90o rotation is achieved for a 1.5 μm wide elliptical ring, closely aligning with micromagnetic modeling results. The ability to achieve 90° MB rotation without complicated experimental setup opens possibilities for critical biotechnology applications, such as photothermal and hyperthermia therapy, where the thermally stable, highly shape-anisotropic FMs in ME-based LOC devices could be transformative.

Stacked CNN-based multichannel attention networks for Alzheimer disease detection

Scientific Reports Najmul Hassan, Abu Saleh Musa Miah, Kota Suzuki et al. Feb 17, 2025 DOI: 10.1038/s41598-025-85703-x

Self-reassembly wearable thermoelectric generator using surface-modified TMDCs

Applied Physics Letters Yaocheng Yang, Huihui Huang Feb 17, 2025 DOI: 10.1063/5.0244224

Wearable thermoelectric generators (WTEGs) are of significance in the conversion of body heat into electricity for the purpose of powering wearable electronic devices. Two-dimensional (2D) transition metal dichalcogenides (TMDCs) exhibit exceptional thermoelectric power factors and mechanical stability, making them promising flexible thermoelectric materials. However, the output voltage of the present TMDC-based WTEGs remains at a relatively low level. In this study, we precisely modulate the electronic structure of titanium disulfide (TiS2) nanosheets in a restacked film by surface modification, leading to the decoupling phenomenon of a simultaneous rise in the electrical conductivity and the Seebeck coefficient. This method enhances the thermoelectric power factor by approximately 14 times compared to pre-modified samples. We fabricated a flexible self-reassembly WTEG using 1T-phase molybdenum disulfide (MoS2) nanosheets as p-type material and modified TiS2 nanosheets as an n-type material. The generator achieved a voltage output of approximately 15 mV while harvesting heat from the human arm, showcasing its potential for practical applications.

Harnessing 3D microarchitecture of pterosaur bone using multi-scale X-ray CT for aerospace material design

Scientific Reports Nathan Pili, Tristan J. Lowe, Lee Margetts et al. Feb 17, 2025 DOI: 10.1038/s41598-025-88257-0

Abstract Pterosaurs were the largest animals to have achieved powered flight in the history of life on Earth, possessing wingspans akin to some modern light aircraft. Vertebrate fossils have shown their potential to retain information on the chemical, physical, and mechanical properties of precursor bone. However, the fossil record is not a traditional source of inspiration for engineers to create palaeo-bioinspired designs. To explore its potential, this study has imaged the three-dimensional porosity of pterosaur bone intending to inspire and improve the mechanical properties of aerospace materials. Historically, two-dimensional histological analysis has resolved fine-scale structures in fossilised bone, which damages the sample. By applying advanced X-ray imaging techniques in this study (using Image Quality Indicators) we show it is possible to non-destructively resolve/verify the microarchitecture of pterosaur bone not previously seen in three dimensions. Pterosaur bone porosity has helped map the macroscopic stresses of this biomaterial but ultimately presents an opportunity to inspire advanced manufactured materials. This microarchitecture of bone offers a unique geometry where self-healing materials with internal monitoring systems can be developed. The iterative process of Darwinian natural selection has evolved multiple engineering solutions that can be reverse engineered to solve challenges facing industry in the 21st Century.

3D protoacoustic radiography: A proof of principle study

Applied Physics Letters Prabodh K Pandey, Gilberto Gonzalez, Kristina Bjegovic et al. Feb 17, 2025 DOI: 10.1063/5.0239878

We propose protoacoustic radiography (PAR), an imaging modality combining proton excitation and acoustic detection for three-dimensional (3D) imaging from a single proton projection. PAR avoids the effect of multiple Coulomb scattering in imaging by detecting ultrasound. Proton-induced acoustic waves propagate spherically, enabling 3D imaging from a single projection. Additionally, the distinctive feature of proton beams—concentrating energy deposition primarily at the Bragg peak—allows for precise depth-selectivity through proton energy tuning. We performed PAR using clinical proton machines, and our results demonstrate the capability of PAR to reconstruct targets at various depths (between ∼20 and 23 cm) with an axial resolution of 1.3 mm by fully leveraging the Bragg peak and by tuning the kinetic energy of the proton beam. PAR offers opportunities for precise structural determination with protons both in biomedicine and nondestructive testing.

A preliminary investigation of the interaction between expectation and the reflexive allocation of covert spatial attention

Scientific Reports Nicholas Crotty, Nicole Massa, Dagoberto Tellez et al. Feb 17, 2025 DOI: 10.1038/s41598-025-89845-w

A piezoelectric wind-induced vibration energy harvester via the Venturi effect

Applied Physics Letters Mengsong Zhu, Zhenli Kuang, Weilin Liao et al. Feb 17, 2025 DOI: 10.1063/5.0249187

In this Letter, the Venturi effect is introduced to change the vibration behaviors of a downwind bluff body and a piezoelectric wind-induced vibration energy harvester using the Venturi effect (VE-PWVEH) is reported to offer an alternative solution to enable a high-performance downwind PWVEH. Also, the power generation characteristics were readily adjusted by the flow channel forming the Venturi effect without modifying the PWVEH structure. So, the VE-PWVEH could possess both great power-generating capability at low wind speed and strong robustness at high wind speed. The results demonstrated that both the output voltage and cut-in wind speed were affected by the attack angle of two rectangular plates used for stimulating the constricted channel. There was an optimal attack angle of 60° where a maximum peak voltage of the VE-PWVEH was increased by 621% and the cut-in wind speed was reduced by 171% compared with the harvester without the Venturi effect. Besides, it demonstrated the VE-PWVEH could achieve an output power of 0.863 mW and illuminate about 120 blue LEDs in series. The introduction of the Venturi effect provides a simple and viable method of flow field disturbance to tune the performance of PWVEHs.

Deep convolutional neural network-based enhanced crowd density monitoring for intelligent urban planning on smart cities

Scientific Reports Wahida Mansouri, Manal Abdullah Alohali, Hamed Alqahtani et al. Feb 17, 2025 DOI: 10.1038/s41598-025-90430-4

Influence of bias-voltage noise on the inelastic cooper-pair tunneling amplifier (ICTA)

Applied Physics Letters U. Martel, R. Albert, F. Blanchet et al. Feb 17, 2025 DOI: 10.1063/5.0240842

We experimentally show that the inelastic cooper-pair tunneling amplifier (ICTA), implementing a DC-powered parametric amplification scheme, can achieve gain and noise performance similar to that of AC-powered Josephson parametric amplifiers. Using experimental data and simulations, we show that the ICTA has near-quantum-limited noise as long as low-frequency voltage noise, expressed as broadening of the Josephson frequency line, is narrower than the amplification bandwidth. We observe a gain of 20 dB across a 11 MHz bandwidth with noise below 1.7 times the quantum limit when the full width at half maximum of the Josephson frequency linewidth is 5.6 MHz.

Nano-scaffold containing functional motif of stromal cell-derived factor 1 enhances neural stem cell behavior and synaptogenesis in traumatic brain injury

Scientific Reports Mohammad Amin Bayat Tork, Mohsen Saberifar, Hamed Joneidi Yekta et al. Feb 17, 2025 DOI: 10.1038/s41598-025-85698-5

Alternating magnetic fields enhanced non-magnetic confined-ruthenium nanoparticles for efficient oxygen evolution reaction

Applied Physics Letters Fujin Huang, Zhenzhen Jiang, Xingfang Luo et al. Feb 17, 2025 DOI: 10.1063/5.0242792

Magnetic heating by alternating magnetic field (AMF) is a fascinating solution to break the bottleneck in oxygen evolution reaction (OER) catalyst improvement. However, practical applications of AMF in electrochemistry are always impeded by the inherent characteristics of the catalyst (i.e., non-magnetic nature and oxidizable feature). Here, a self-heating working electrode substrate of C/Fe3O4/C is proposed to be fabricated, on which non-magnetic Ru nanoparticles confined within the amorphous carbon matrix are deposited as the catalytic layer. Under AMF, magnetic Fe3O4 particle can be stimulated and generate the magnetic heating associated with Néel relaxation, which improves the OER efficiency of Ru nanoparticles with the overpotential at 10 mA cm−2 reduced by 72 mV. Together with the high stability rendered by confined structure, the exploitation of AMF on non-magnetic catalyst is confirmed, and the developed strategy offers a general pathway to advance OER catalyst performance in the future.