Browse Articles

Discover research articles across all indexed journals

Carbon Surface Chemistry: Benchmark for the Analysis of Oxygen Functionalities on Carbon Materials

Advanced Materials Yuying Dang, Yumeng Liu, Pan Xiang et al. Mar 01, 2025 DOI: 10.1002/adma.202418239

AbstractThe explicit roles of the hardly avoidable oxygen species on carbon materials in various fields remain contentious due to the limitations of characterization techniques, which lead to a lack of fundamental understanding of carbon surface chemistry. This study delves exhaustively into the comprehension of the features of different oxygen‐modified carbons through the dynamic evolution of surficial oxygen functional groups. Significant differences of thermal stability and electronic properties among various oxygen species are elucidated via in situ characterizations and theoretical calculations, providing a reliable benchmark for identifying oxygen functional groups on carbon materials. The chemical properties of the carbon materials are simultaneously investigated to show the influence of the oxygen functional groups on carbon structures, redox stability, and scalable metal adsorption. These findings not only consider the common misconception that oxygen species produced under various conditions possess identical properties but also raise awareness of understanding carbon surface chemistry in the atomic level.

Flat‐Band Electronic Bipolarity in a Janus and Kagome van der Waals Semiconductor Nb <sub>3</sub> TeI <sub>7</sub>

Advanced Materials Jo Hyun Yun, Minki Sung, Minhyuk Choi et al. Mar 01, 2025 DOI: 10.1002/adma.202415045

Abstract Janus materials, a novel class of materials with two faces of different chemical compositions and electronic polarities, offer significant potential for various applications with catalytic reactions, chemical sensing, and optical or electronic responses. A key aspect for such functionalities is face‐dependent electronic bipolarity, which is usually limited by the chemical distinction of terminated surfaces and has not been exploited in the semiconducting regime. Here, it is showed that a Janus and Kagome van der Waals (vdW) material Nb 3 TeI 7 has ferroelectric‐like coherent stacking of the Janus layers and hosts strong electronic bipolar states in the semiconducting regime. A large potential difference of ∼ 0.7 eV between the I 4 and TeI 3 terminated surfaces is observed, despite only one fourth of the I atoms being replaced by Te atoms on one side of the layers. Additionally, robust semiconducting properties with the face‐dependent n ‐type and p ‐type field‐effect transistor behaviors are demonstrated. These unique properties are attributed to Nb 4 d orbital flat bands of the breathing‐Kagome lattice, of which significantly large electron mass makes the semiconducting properties immune to impurity doping, and inherent strong electron correlation enhances asymmetric electron distribution, thereby amplifying a built‐in electric field. These findings highlight that naturally‐grown Janus and Kagome vdW semiconductors provide a promising material platform for utilizing strong electronic bipolarity in 2D‐material‐based applications.

Transmembrane Parkinson’s disease mutation of PINK1 leads to altered mitochondrial anchoring

Journal of Biological Chemistry Raelynn Brassard, Elena Arutyunova, Emmanuella Takyi et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108253

Temperature effect of the pressure coefficients for multi-phonon coupling in B3-ZnS

Applied Physics Letters Binbin Wu, Yuru Lin, Yu Li et al. Mar 01, 2025 DOI: 10.1063/5.0258828

The zincblende (B3) to rock salt (B1) in ZnS is a typical pressure-induced phase transition. Meanwhile, B3-ZnS exhibits distinctive multi-phonon coupling behavior. Despite previous studies have explored the B3–B1 transition and phonon behavior in ZnS at room temperature, the effects of low temperature have yet to be experimentally verified. This has resulted in the absence of experimental data on the pressure–temperature (P–T) phase diagram at low temperatures. Here, we probe the pressure-induced B3–B1 phase transition and phonon evolution behavior of ZnS at low temperatures (90–300 K) using isothermal compression Raman spectroscopy. We experimentally determine the ZnS B3–B1 phase boundaries at low temperatures and obtain the corresponding Clapeyron slope, dP/dT = −16.4 ± 2.1 MPa/K. In addition, we found that the pressure coefficients (KiT) of all phonon modes of B3-ZnS decrease with decreasing temperature. This is mainly due to the reduction of anharmonic effects at low temperatures. Further, KiT of the multi-phonon coupling states are always larger than those of the single phonon state.

Interpretable Radiomics Model Predicts Nanomedicine Tumor Accumulation Using Routine Medical Imaging

Advanced Materials JiaJia Tang, Jie Zhang, Yang Li et al. Mar 01, 2025 DOI: 10.1002/adma.202416696

AbstractAccurately predicting nanomedicine accumulation is critical for guiding patient stratification and optimizing treatment strategies in the context of precision medicine. However, non‐invasive prediction of nanomedicine accumulation remains challenging, primarily due to the complexity of identifying relevant imaging features that predict accumulation. Here, a novel non‐invasive method is proposed that utilizes standard‐of‐care medical imaging modalities, including computed tomography and ultrasound, combined with a radiomics‐based model to predict nanomedicine accumulation in tumor. The model is validated using a test dataset consisting of seven tumor xenografts in mice and three sizes of gold nanoparticles, achieving an area under the receiver operating characteristic curve of 0.851. The median accumulation levels of tumors predicted as “high accumulators” are 2.69 times greater than those predicted as “low accumulators”. Analysis of this machine‐learning‐driven interpretable radiomics model revealed imaging features that are strongly correlated with dense stroma, a recognized biological barrier to effective nanomedicine delivery. Radiomics‐based prediction of tumor accumulation holds promise for stratifying patient and enabling precise tailoring of nanomedicine treatment strategies.

Ring‐Opening Polymerization of Surface Ligands Enables Versatile Optical Patterning and Form Factor Flexibility in Quantum Dot Assemblies

Advanced Materials Yunseo Lee, Jiyun Shin, Seungki Shin et al. Mar 01, 2025 DOI: 10.1002/adma.202415436

Abstract The evolution of display technologies is rapidly transitioning from traditional screens to advanced augmented reality (AR)/virtual reality (VR) and wearable devices, where quantum dots (QDs) serve as crucial pure‐color emitters. While solution processing efficiently forms QD solids, challenges emerge in subsequent stages, such as layer deposition, etching, and solvent immersion. These issues become especially pronounced when developing diverse form factors, necessitating innovative patterning methods that are both reversible and sustainable. Herein, a novel approach utilizing lipoic acid (LA) as a ligand is presented, featuring a carboxylic acid group for QD surface attachment and a reversible disulfide ring structure. Upon i‐line UV exposure, the LA ligand initiates ring‐opening polymerization (ROP), crosslinking the QDs and enhances their solvent resistance. This method enables precise full‐color QD patterns with feature sizes as small as 3 µm and pixel densities exceeding 3788 ppi. Additionally, it supports the fabrication of stretchable QD composites using LA‐derived monomers. The reversible ROP process allows for flexibility, self‐healing, and QD recovery, promoting sustainability and expanding QD applications for ultra‐fine patterning and on‐silicon displays.

A novel FOXM1–BCL2A1 axis determines unfavorable response to venetoclax in AML

Journal of Biological Chemistry Sanjeev Raghuwanshi, Ahmed Magdy, Nissim Hay et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108240

HCN4 channels sense temperature and determine heart rate responses to heat

Nature Communications Yuejin Wu, Qinchuan Wang, Jonathan Granger et al. Mar 01, 2025 DOI: 10.1038/s41467-025-57358-9

Biorealistic response in a technology-compatible graphene synaptic transistor

Applied Physics Letters Anastasia Chouprik, Elizaveta Guberna, Islam Mutaev et al. Mar 01, 2025 DOI: 10.1063/5.0243814

Artificial synapse is a key element of future brain-inspired neuromorphic computing systems implemented in hardware. This work presents a graphene synaptic transistor based on all-technology-compatible materials that exhibits highly tunable biorealistic behavior. It is shown that the device geometry and interface properties can be designed to maximize the memory window and minimize power consumption. The device exhibits a virtually continuous range of multiple conductance levels, similar to synaptic weighting, which is achieved by gradual injection/emission of electrons into the floating gate and interface traps under the influence of an external electric field. Similar to the biological synapse, the transistor has short-term intrinsic dynamics that affects the long-term state. The temporal injection/emission dynamics of an electronic synapse closely resembles those of its biological counterpart and is exploited to emulate biorealistic behavior using a number of synaptic functions, including paired-pulse facilitation/depression, spike-rate-dependent plasticity, and others. Such a synaptic transistor can serve as a building block in hardware artificial networks for advanced information processing and storage.

The intraflagellar transport cycle

Nature Reviews Molecular Cell Biology Samuel E. Lacey, Gaia Pigino Mar 01, 2025 DOI: 10.1038/s41580-024-00797-x

Broadband THz Modulation via Solid‐State Organic Electrochemical Devices

Advanced Materials Jonathan Scott, Atsutse Kludze, Megan Santamore et al. Mar 01, 2025 DOI: 10.1002/adma.202415828

AbstractThe sub‐Terahertz and Terahertz bands play a critical role in next‐generation wireless communication and sensing technologies, thanks to the large amount of available bandwidth in this spectral regime. While long‐wavelength (microwave to mm‐Wave) and short‐wavelength (near‐infrared to ultraviolet) devices are well‐established and studied, the sub‐THz to THz regime remains relatively underexplored and underutilized. Traditional approaches used in the aforementioned spectral regions are more difficult to replicate in the THz band, leading to the need for the development of novel devices and structures that can manipulate THz radiation effectively. Herein a novel organic, solid‐state electrochemical device is presented, capable of achieving modulation depths of over 90% from ≈500 nm of a conducting polymer that switches conductivity over a large dynamic range upon application of an electronically controllable external bias. The stability of such devices under long‐term, repeated voltage switching, as well as continuous biasing at a single voltage, is also explored. Switching stabilities and long‐term bias stabilities are achieved over two days for both use cases. Additionally, both depletion mode (always “ON”) and accumulation mode (always “OFF”) operation are demonstrated. These results suggest applications of organic electrochemical THz modulators in large area and flexible implementations.

The Photoinduced Response of Antimony from Femtoseconds to Minutes

Advanced Materials Sebastian Walfort, Nils Holle, Julia Vehndel et al. Mar 01, 2025 DOI: 10.1002/adma.202414687

Abstract As a phase change material (PCM), antimony exhibits a set of desirable properties that make it an interesting candidate for photonic memory applications. These include a large optical contrast between crystalline and amorphous solid states over a wide wavelength range. Switching between the states is possible on nanosecond timescales by applying short heating pulses. The glass state is reached through melting and rapid quenching through a supercooled liquid regime. While initial and final states are easily characterized, little is known about the optical properties on the path to forming a glass. Here we resolve the entire switching cycle of antimony with femtosecond resolution in stroboscopic optical pump‐probe measurements and combine the experimental results with ab‐initio molecular dynamics simulations. The glass formation process of antimony is revealed to be a complex multi‐step process, where the intermediate transient states exhibit distinct optical properties with even larger contrasts than those observed between crystal and glass. The provided quantitative understanding forms the basis for exploitation in high bandwidth photonic applications.

Enhanced kinase translocation reporters for simultaneous real-time measurement of PKA, ERK, and calcium

Journal of Biological Chemistry Shang-Jui Tsai, Yijing Gong, Austin Dabbs et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108183

Genomically defined hypervirulent Klebsiella pneumoniae contributed to early-onset increased mortality

Nature Communications Yunfei Tang, Pengcheng Du, Chunjing Du et al. Mar 01, 2025 DOI: 10.1038/s41467-025-57379-4

Optimal focusing for single-color laser filamentation to generate terahertz radiation

Applied Physics Letters G. Rizaev, D. Pushkarev, M. Levus et al. Mar 01, 2025 DOI: 10.1063/5.0252004

We study the influence of the laser beam numerical aperture on the energy of different spectral components of terahertz emission from single-color filament plasma. The parameters of the plasma channel, laser pulse after filamentation, and their correlation with the terahertz energy are analyzed. It is demonstrated that by varying the numerical aperture, the terahertz energy can be increased by more than an order of magnitude, and the optimal focusing of the laser beam corresponds to the transition from filamentation regime with nonlinear focusing to the regime with geometric focusing prevalence.

Author Correction: All the sites we cannot see: Sources and mitigation of false negatives in RNA modification studies

Nature Reviews Molecular Cell Biology Shalini Oberdoerffer, Wendy V. Gilbert Mar 01, 2025 DOI: 10.1038/s41580-024-00810-3

Tuning Absorption State and Intermolecular Potential of Organic Semiconductors for Narrowband Ultraviolet Photodetection

Advanced Materials Yining Ma, Quan Gao, Yudong Li et al. Mar 01, 2025 DOI: 10.1002/adma.202414589

AbstractNarrowband response of organic semiconductors determines the band selectivity and anti‐interference of the organic photodetectors, which are pursued for a long time but have not yet been resolved in the UV band. Herein, a feasible strategy is developed to realize narrowband UV response by tuning the absorption state and intermolecular potential of organic semiconductors. The as‐designed non‐Donor‐Acceptor molecule, 2,5‐diphenylthieno[3,2‐b]thiophene (2,5‐DPTT), exhibits narrowband absorption by fully suppressing the charge transfer state absorption. Simultaneously, the intermolecular potential is significantly enhanced (to ≈90 KJ mol−1) by modulating the molecular planarity. Consequently, the UV photodetector based on 2,5‐DPTT achieves excellent narrowband response at 310 nm wavelength and a record‐breaking photosensitivity (P = 1.21 × 106) in the deep UV range. In the demonstration application of flame alarm, the flame detector based on 2,5‐DPTT single crystal exhibits excellent anti‐interference capability. This work provides the inspiration for designing narrowband responsive organic semiconductors and building up multifunctional optoelectronic devices.

Correction: Ascorbic acid enhances low-density lipoprotein receptor expression by suppressing proprotein convertase subtilisin/kexin 9 expression

Journal of Biological Chemistry Dandan Wang, Xiaoxiao Yang, Yuanli Chen et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108269

Two-photon absorption under few-photon irradiation for optical nanoprinting

Nature Communications Zi-Xin Liang, Yuan-Yuan Zhao, Jing-Tao Chen et al. Mar 01, 2025 DOI: 10.1038/s41467-025-57390-9

Abstract Two-photon absorption (TPA) has been widely applied for three-dimensional imaging and nanoprinting; however, the efficiency of TPA imaging and nanoprinting using laser scanning techniques is limited by its trade-off to reach high resolution. Here, we unveil a concept, few-photon irradiated TPA, supported by a spatiotemporal model based on the principle of wave-particle duality of light. This model describes the precise time-dependent mechanism of TPA under ultralow photon irradiance with a single tightly focused femtosecond laser pulse. We demonstrate that a feature size of 26 nm (1/20 λ) and a pattern period of 0.41 λ with a laser wavelength of 517 nm can be achieved by performing digital optical projection nanolithography under few-photon irradiation using the in-situ multiple exposure technique, improving printing efficiency by 5 orders of magnitude. We show deeper insights into the TPA mechanism and encourage the exploration of potential applications for TPA in nanoprinting and nanoimaging.

Steady-state transition of buckled nano graphite sheets in vibration processes

Applied Physics Letters Xinjie Liu, Haiyan Hu, Xiao Wang et al. Mar 01, 2025 DOI: 10.1063/5.0247821

Nanomechanical resonators crafted from two-dimensional materials exhibit heightened sensitivity to stress. The impact of tensile stress on resonators has received extensive attention. However, relatively little emphasis has been focused on the behavior of resonators under compression stresses, especially in the buckled state. This study explored the vibration of buckled graphite sheets under external excitation using experimental analysis, molecular dynamics (MD) simulations, and nonlinear isotropic plate model (NIPM). Notably, multiple peaks corresponding to the identical mode appeared in the spectrum. The additional peak distinct from the natural frequency arose from transition between two steady states of the film. Remarkably, the frequency of the peak corresponding to the transition exhibited greater sensitivity to external excitations and stress than the natural frequency of the resonator did. This phenomenon opens avenues for developing 2D resonant nanomechanical sensors with enhanced sensitivity, as well as bistable nanoelectromechanical resonators.