Browse Articles
Discover research articles across all indexed journals
A Rolling Light‐Driven Pneumatic Soft Actuator Based on Liquid–Gas Phase Change
AbstractLight‐driven wireless actuators provide obvious advantages for remote control. However, traditional double‐layer actuators are restricted to the thin film deformation mode when undertaking complex tasks. Here, an actuator is proposed that employs thermal strain and local photothermal effects induced by low boiling point liquids to generate asymmetry along the fiber axis, thereby causing elastic deformation of the fiber. Under continuous irradiation, the sustained elastic deformation results in dynamic frustration within the fiber, creating torque around its axis. Based on this principle, the fiber actuator fabricated in this study enables rolling translation, while the ring actuator achieves simultaneous rolling and lifting motion for object manipulation. Continuous rolling under light eliminates the need for complex light manipulation. This new movement method offers an insight for various application scenarios.
Molecular sorting of nitrogenase catalytic cofactors
Enhanced rectification behavior and electrical properties of ZnO:Cu/ZnO heterojunctions via laser-induced doping and annealing treatments
Cu-doped ZnO:Cu/ZnO heterojunctions were fabricated via a three-step laser-induced doping technique. This study systematically investigated the electrical properties, microstructure, elemental valence states, and energy-band alignment of these heterojunctions through multiple analytical techniques. Current–voltage measurements revealed an asymmetric, nonlinear behavior due to the depletion region at the ZnO:Cu/ZnO interface, with annealing further enhancing electrical performance by yielding a lower turn-on voltage of 0.3 V, an increased rectification ratio of 81.1, and a reduced ideality factor of 6.69. Band structure analysis showed that both the conduction band offset and valence band offset at the ZnO:Cu/ZnO interface increase, indicating a higher barrier height, resulting in more pronounced rectification behavior. X-ray diffraction showed that the laser-treated samples have polycrystalline structures, and annealing improved the crystallinity, thereby enhancing the conductivity. Furthermore, secondary ion mass spectroscopy confirmed the deep implantation of high concentrations of Cu ions into ZnO. Depth-profiling x-ray photoelectron spectra revealed the co-presence of Cu+ and Cu2+, both of which contribute to the p-type conductivity. These findings offer valuable insights for optimizing ZnO heterojunctions in applications such as light-emitting diodes and laser diodes with a high level of efficiency and low turn-on voltage.
How modulation of the tumor microenvironment drives cancer immune escape dynamics
Overcoming Energy‐Scaling Barriers: Efficient Ammonia Electrosynthesis on High‐Entropy Alloy Catalysts
Abstract Electrochemically converting nitrate (NO 3 − ) to value‐added ammonia (NH 3 ) is a complex process involving an eight‐electron transfer and numerous intermediates, presenting a significant challenge for optimization. A multi‐elemental synergy strategy to regulate the local electronic structure at the atomic level is proposed, creating a broad adsorption energy landscape in high‐entropy alloy (HEA) catalysts. This approach enables optimal adsorption and desorption of various intermediates, effectively overcoming energy‐scaling limitations for efficient NH 3 electrosynthesis. The HEA catalyst achieved a high Faradaic efficiency of 94.5 ± 4.3% and a yield rate of 10.2 ± 0.5 mg h −1 mg cat −1 . It also demonstrated remarkable stability over 250 h in an integrated three‐chamber device, coupling electrocatalysis with an ammonia recovery unit for continuous NH 3 collection. This work elucidates the catalytic mechanisms of multi‐functional HEA systems and offers new perspectives for optimizing multi‐step reactions by circumventing adsorption‐energy scaling limitations.
Extremophilic hemoglobins: The structure of Shewanella benthica truncated hemoglobin N
Predicting a metallic carbon allotrope: <i>Pop</i>-graphite via Na–C compounds
Carbon allotropes continue to captivate research interest due to their structural diversity and remarkable properties. While diamond-like carbon structures have been extensively studied, bulk graphite-like, layer-structured allotropes remain relatively unexplored and experimentally elusive. Here, we proposed a hitherto unknown layered carbon structure, designated as pop-graphite, synthesizable from high-pressure prepared sodium–carbon compounds. Through ab initio evolutionary structure searches and first-principles calculations, we identify a thermodynamically stable layered NaC3 intercalation compound at 14.0 GPa, featuring a distinctive edge-sharing penta-octa-penta (pop) carbon framework with intercalated sodium atoms. Upon sodium removal, the resultant pop-graphite structure remains stable under ambient conditions, exhibiting superior electrical conductivity and mechanical flexibility compared to conventional graphite. Our calculations reveal its intrinsic metallic nature and single-gap superconductivity, driven by electron–phonon coupling involving C pz states. These findings expand the frontiers of carbon allotrope design and their fundamental properties.
A privacy-preserving dependable deep federated learning model for identifying new infections from genome sequences
Weak Near‐Infrared Light Visualization Enabled by Smart Multifunctional Optoelectronics
AbstractVisualizing weak NIR light is critical for sensing, imaging, and communication, but remains challenging due to inefficient detection and upconversion (UC) mechanisms. A smart NIR‐to‐visible photon‐UC organic optoelectronic device is reported that integrates photodetection, light‐emitting diode (LED), and photovoltaic capabilities to enable clear visualization of weak NIR light. The programmable device has continuous photodetection monitoring of the incident NIR intensity. When the incident intensity falls below a preset threshold, the LED function is automatically triggered to compensate for the UC emission, amplifying the visualization. The smart multifunctional device uses a carefully designed ternary bulk heterojunction sensitizer doped with rubrene:DBP as the emitter. It demonstrates high UC efficiency (>1.5%) for upconversion from 808 to 608 nm, allowing NIR visualization without external power under strong illumination. It also shows excellent NIR photodetection with photoresponsivity of 0.35 A W−1 at 800 nm and specific detectivity reaching 10¹2–10¹3 Jones, enabling sensitive detection under low‐light conditions. It also exhibits a low turn‐on voltage (0.9 V) and luminance exceeding 1200 cd m−2 at 5 V, ensuring energy‐efficient light compensation. Furthermore, it achieves >10% power conversion efficiency, enabling sustainable self‐powered operation. This multifunctional, high‐performance system offers great potential in sensing, energy harvesting, and display technologies.
Electric Field‐Induced Nonreciprocal Directional Dichroism in a Time‐Reversal‐Odd Antiferromagnet
Abstract Antiferromagnets with broken time‐reversal () symmetry (‐odd antiferromagnets) have gained extensive attention, mainly due to their ferromagnet‐like behavior despite the absence of net magnetization. However, certain types of ‐odd antiferromagnets remain inaccessible by the typical ferromagnet‐like phenomena (e.g., anomalous Hall effect). One such system is characterized by a ‐odd scalar quantity, the magnetic toroidal monopole. To access the broken symmetry in such a system, a unique nonreciprocal optical phenomenon, electric field‐induced nonreciprocal directional dichroism ( E ‐induced NDD), is employed. Signals of E ‐induced NDD are successfully detected in a ‐odd antiferromagnet, Co₂SiO₄, whose magnetic structure is characterized by the magnetic toroidal monopole. Furthermore, by spatially resolving the E ‐induced NDD, spatial distributions of a pair of domain states related to one another by the operation are visualized. The domain imaging revealed the inversion of the domain pattern by applying a magnetic field, which is explained by trilinear coupling attributed to the piezomagnetic effect. The observation of E ‐induced NDD highlights unique functionalities of ‐odd antiferromagnets.
Recombinant antibodies inhibit enzymatic activity of the E3 ubiquitin ligase CHIP via multiple mechanisms
Ultrafast interfacial charge transfer regulation in organo-metal perovskites through bandgap engineering
Selecting suitable materials for electron transport layers and optimizing their electronic properties are crucial for enhancing the performance of organic light-emitting diode. However, the harsh deposition conditions and high costs associated with traditional charge transport layers indicate significant potential for further optimization. Herein, we investigate charge transfer at organic-perovskite heterojunctions and explore how bandgap engineering can be utilized to modulate interfacial charge dynamics. Using transient absorption and time-resolved photoluminescence spectroscopy, we demonstrate that charge transfer at the interface of organic-perovskite heterojunction can be regulated and enhanced by increasing the energy level offset, which is achieved through the adjustment of the halide ion ratio in the perovskite material. These findings provide insights into interfacial charge transfer mechanisms and confirm the feasibility of bandgap engineering as a strategy for tailoring charge-transfer properties in organic optoelectronic devices.
Continuous‐Wave Pumped Self‐Assembled Colloidal Topological Lasers
AbstractThe field of optoelectronic integrated circuits is actively developing reliable and efficient room‐temperature continuous‐wave (CW) lasers. CW‐pumped lasers combine the economical and simple manufacturing processes of colloidal semiconductor lasers with the efficient and stable output of continuous pumping, enabling them to significantly impact the field of semiconductor lasers. However, development is still severely challenged by limitations such as gain materials and cavity structures. Consequently, as a compromise, most colloidal semiconductor lasers proposed to date have relied on another pulsed laser as the pumping source. In this study, a self‐assembled colloidal topological laser is proposed that benefits from CW pumping at room temperature. By utilizing an interfacial self‐assembly strategy, nanoplatelets (NPLs) are managed to control the collective orientation (face‐down or edge‐up), achieving controlled polarization of amplified spontaneous emission for the first time. Furthermore, precise control over the thickness of a single NPL layer is demonstrated, which enables the laser system to offer extensive wavelength tunability (over 50 nm), ultra‐high polarization (over 95%), and good temporal stability. These metrics signify the optimal performance level of colloidal semiconductor lasers, marking a new era in solution processing systems for the optoelectronic integrated circuit field.
A Robust, Biodegradable, and Fire‐Retardant Cellulose Nanofibers‐Based Structural Material Fabricated from Natural Sargassum
Abstract With increasing concern about the environmental pollution of petrochemical plastics, people are constantly exploring environmentally friendly and sustainable alternative materials. Compared with petrochemical materials, cellulose has overwhelming superiority in terms of mechanical properties, thermal properties, cost, and biodegradability. However, the flammability of cellulose hinders its practical application to a certain extent, so improving the fire‐retardant properties of cellulose nanofiber‐based materials has become a research focus. Here, cellulose nanofiber and alginate are extracted from abundant natural sargassum as high‐strength nanoscale building blocks, and then a sargassum cellulose fire‐retardant structural material is prepared through a bottom‐up hydrogel layer‐by‐layer method. The structural materials obtained incorporate excellent mechanical properties (≈297 MPa), thermal stability (≈200 °C), low thermal expansion coefficient (≈7.17 × 10 −6 K −1 ), and fire‐retardant properties. This work largely improves the utilization of seaweed residue and natural polymers, providing a bio‐based fire‐retardant strategy, and has a wide range of development prospects in the field of fiber‐based high‐performance structural materials in the future.
Blocking activation of the C1r zymogen defines a novel mode of complement inhibition
The origin of the uniaxial magnetic anisotropy in Fe/GaAs(100) system
Fe/GaAs is a prototype system of spin injection at room temperature. The interfacial strain and oriented bonds are both considered the origin of the Fe in-plane uniaxial magnetic anisotropy (UMA), which remains decisive. Here, by the x-ray magnetic circular dichroism (XMCD) and the vibrating sample magnetometer measurements, this study shows that in the Fe/Cr(t)/GaAs structure, the in-plane UMA of Fe originates from the chemical bonding between the Fe and the GaAs substrate by varying Cr thickness, t. The UMA drops as the Cr coverage increases, characterized by a decrease in the saturation field from 2400 to 57 Oe. The XMCD studies reveal that the Fe orbital moment, a signature of chemical bonds, decreases from 0.216 μB at Cr = 0 ML to 0.138 μB at Cr = 5 ML. The reduction of the Fe orbital moment and the UMA are qualitatively consistent, establishing a link between the UMA and the interfacial chemical bonds. The decreased UMA remains unchanged at t &gt; 5 ML, above which Fe and GaAs are fully separated by a continuous Cr layer. Our findings provide clear experimental evidence that the UMA in the Fe/GaAs system originates from the oriented interface bonds, clarifying the UMA origin in this prototype system.
High‐Density Accessible Iron Single‐Atom Catalyst for Durable and Temperature‐Adaptive Laminated Zinc‐Air Batteries
AbstractDesigning single‐atom catalysts (SACs) with high density of accessible sites by improving metal loading and sites utilization is a promising strategy to boost the catalytic activity, but remains challenging. Herein, a high site density (SD) iron SAC (D‐Fe‐N/C) with 11.8 wt.% Fe‐loading is reported. The in situ scanning electrochemical microscopy technique attests that the accessible active SD and site utilization of D‐Fe‐N/C reach as high as 1.01 × 1021 site g−1 and 79.8%, respectively. Therefore, D‐Fe‐N/C demonstrates superior oxygen reduction reaction (ORR) activity in terms of a half‐wave potential of 0.918 V and turnover frequency of 0.41 e site−1 s−1. The excellent ORR property of D‐Fe‐N/C is also demonstrated in the liquid zinc‐air batteries (ZABs), which exhibit a high peak power density of 306.1 mW cm−2 and an ultra‐long cycling stability over 1200 h. Moreover, solid‐state laminated ZABs prepared by presetting an air flow layer show a high specific capacity of 818.8 mA h g−1, an excellent cycling stability of 520 h, and a wide temperature‐adaptive from −40 to 60 °C. This work not only offers possibilities by improving metal‐loading and catalytic site utilization for exploring efficient SACs, but also provides strategies for device structure design toward advanced ZABs.
Efficient and Scalable Direct Regeneration of Spent Layered Cathode Materials via Advanced Oxidation
Abstract Among direct recycling methods for spent lithium‐ion batteries, solid‐state regeneration is the route with minimal bottlenecks for industrial application and is highly compatible with the current industrial cathode materials production processes. However, surface structure degradation and interfacial impurities of spent cathodes significantly hinder Li + replenishment during restoration. Herein, we propose a unique advanced oxidation strategy that leverages the inherent catalytic activity of spent layered cathode materials to address these challenges. This strategy decomposes H 2 O 2 to generate •OH and •O 2 − free radicals, facilitating oxidation reactions with the surface of the spent cathode. As a result, this approach effectively elevates the Ni valence state, modifies the surface microstructure, and eliminates fluorine‐containing interface impurities, thereby promoting the solid‐state regeneration process. The regenerated LiNi 0.83 Co 0.12 Mn 0.05 O 2 cathodes demonstrate a specific capacity of 206 mAh g −1 at 0.1 C, comparable to commercially available cathodes. Meanwhile, this advanced oxidation strategy proves adaptable and scalable for treating industrial dismantled LiNi 0.5 Co 0.2 Mn 0.3 O 2 black mass. A 3.1 Ah pouch cell assembled with the regenerated LiNi 0.5 Co 0.2 Mn 0.3 O 2 exhibits impressive capacity retention of 74% after 500 cycles. Additionally, a techno‐economic analysis reveals that this strategy possesses low energy consumption, minimal environmental footprint, and high economic viability, suggesting its suitability for the battery recycling industry.
Aquaporin five deficiency suppresses fatty acid oxidation and delays liver regeneration through the transcription factor PPAR
Near-sensor reservoir computing for Braille recognition via high stability memristors
Converting external physical information into tactile sensations for efficient dynamic processing like human beings is crucial for edge applications such as intelligent prosthetics and robotics. Reservoir computing, a bio-inspired computing paradigm, excels at processing temporal signals and offers advantages like low training costs and easy deployment on edge devices. Many applications have been developed for reservoir computing using physical devices. However, there has been a paucity of research using reservoir computing to simulate the human tactile system. Furthermore, the implementation of a reusable physical reservoir computing system is of significant importance. Herein, we implement a near-sensor physical reservoir computing system for haptic simulation, utilizing a simple peripheral circuit design. The reservoir's high-dimensional, nonlinear, and short-term memory requirements are physically realized by a memristor with an integrated lithium polymer electrolyte and polycrystalline tungsten oxide layer, which exhibits good cycle-to-cycle consistency. As a proof of concept, the system completes the learning and classification tasks for Braille numerals and characters, achieving a high recognition accuracy of up to 96% within 400 cycles. This approach offers innovative insights for developing human–machine interaction applications with enhanced intelligent perception capability.