Browse Articles

Discover research articles across all indexed journals

Integrating DNA metabarcoding and morphological analysis improves marine zooplankton biodiversity assessment

Scientific Reports So-Yeon Kim, Seongmin Cheon, Chungoo Park et al. Mar 01, 2025 DOI: 10.1038/s41598-025-89684-9

Activating Halogen Circulation Enables Efficient and Stable Wide‐Bandgap Mixed‐Halide Perovskite Solar Cells

Advanced Materials Yang Yang, Qing Chang, Jie Su et al. Mar 01, 2025 DOI: 10.1002/adma.202416513

Abstract Developing strategies to manage ion‐migration‐induced phase segregation in wide‐bandgap (WBG) perovskites is crucial for achieving high‐performance perovskite‐silicon tandem solar cells (TSCs). However, maintaining continuous suppression of phase segregation from the film crystallization process to device operation remains a significant challenge. The present study demonstrates an efficient strategy of activating halogen circulation in WBG perovskite by using halogen circulation agents (HCA) of N‐halosuccinimide molecules as the sustainable stabilizers, in order to achieve dynamic halogen equilibrium within the precursor solution and perovskite film, which blocks the migration path of Br − /I − ions both in crystallization and aging of WBG perovskites. Attempts on in situ dynamic monitoring of halide migration visually verified the enhanced stability by activated halogen circulation in both WBG films and devices. Consequently, present work achieves a champion efficiency up to 23.25% with a low V oc loss of 0.39 V in the 1.67‐eV‐bandgap device, and the HCA‐based devices can maintain 88% and 93% of their initial efficiencies over 1000 h under continuous illumination and 2500 h at 85 °C in N 2 atmosphere, respectively. As a proof of concept, the perovskite/silicon monolithic TSCs are fabricated to demonstrate a high V oc of 1.99 V and a high power conversion efficiency of 33.2%.

Voltage-controlled half adder via magnonic inverse design

Applied Physics Letters Ze Chen, Gerard Joseph Lim, Calvin Ching Ian Ang et al. Mar 01, 2025 DOI: 10.1063/5.0256599

In this work, we report a magnonic device capable of dynamic control over magnon propagation. By leveraging voltage-controlled magnetic anisotropy on yttrium iron garnet waveguides, we have carried out simulations of an active demultiplexer and half-adder designed using inverse design principles. A high output intensity multiplexer was similarly developed via inverse design to mitigate the magnon re-emission issue in Y-shaped combiners. Trapezoid electrodes were also introduced to minimize magnon intensity losses due to the magnetic anisotropy gradients across the cascading magnon circuit. The magnonic half-adder, constructed using active demultiplexers and a multiplexer, showcases the potential of magnonic logic circuits for binary addition operations.

Understanding patient perception of digital value co-creation in electronic health record through clustering approach

Scientific Reports Ilma Nurul Rachmania, Gatot Yudoko, Mursyid Hasan Basri et al. Mar 01, 2025 DOI: 10.1038/s41598-025-91287-3

An Integrated Modular Vaccination System for Spatiotemporally Separated Perioperative Cancer Immunotherapy

Advanced Materials Feiyan Gao, Xinlong Liu, Zhongyi Ma et al. Mar 01, 2025 DOI: 10.1002/adma.202418322

AbstractThe perioperative period is crucial for determining postoperative tumor recurrence and metastasis. Various factors in postoperative lesions can diminish the therapeutic effect of conventional chemoradiotherapy, while emerging immunotherapy is restricted. The combination use of inflammatory inhibitors during treatment is also controversial. Here, a modular microneedle prepared from engineered keratin proteins is reported, which spatially and temporally differentiates the microenvironment of immune cell activation required for immunotherapy from that of wound healing. The recombinant keratin‐84‐T‐based needle root layer, mainly retained in the epidermis, facilitated dendritic cell recruitment to achieve maximum antigen presentation of loaded vaccines. Meanwhile, the recombinant keratin‐81‐1Aα‐based needle tip layer, located within the dermis, rapidly mitigated inflammatory responses while promoting tissue repair and regeneration. Unlike simply mixing immunotherapy and wound treatment, this spatiotemporal segmentation approach maximized the efficacy of immune therapeutics while promoting wound healing, making it suitable for application throughout the perioperative period.

Shear‐Mediated Stabilization of Spin Spiral Order in Multiferroic NiI <sub>2</sub>

Advanced Materials Yi Tseng, Connor A. Occhialini, Qian Song et al. Mar 01, 2025 DOI: 10.1002/adma.202417434

Abstract Type‐II multiferroicity from non‐collinear spin order is recently explored in the van der Waals material NiI 2 . Despite the importance for improper ferroelectricity, the microscopic mechanism of the helimagnetic order remains poorly understood. Here, the magneto‐structural phases of NiI 2 are investigated using resonant magnetic X‐ray scattering (RXS) and X‐ray diffraction. Two competing magnetic phases are identified. Below 60 K, an incommensurate magnetic reflection ( q  ≈ [0.143,0,1.49] reciprocal lattice units) is observed which exhibits finite circular dichroism in RXS, signaling the inversion symmetry‐breaking helimagnetic ground state. At elevated temperature, in the non‐polar phase (60 K &lt;  T  &lt; 75 K), a distinct q  ≈  [0.087,0.087,1.5] magnetic order is observed, attributed to a collinear incommensurate (CI) state. The first‐order CI‐helix transition is concomitant with a structural transition characterized by a significant interlayer shear, which drives the helimagnetic ground state as evidenced by a mean‐field Heisenberg model including interlayer exchange and its coupling to the structural distortion. These findings identify interlayer magneto‐structural coupling as the key driver behind multiferroicity in NiI 2 .

Charge balance effect on the phase stability and reliability in doped HfO2-ZrO2 superlattice films for further DRAM capacitors: A first-principles study

Applied Physics Letters Ting Zhang, Maokun Wu, Miaojia Yuan et al. Mar 01, 2025 DOI: 10.1063/5.0252127

A dielectric material with a higher permittivity and a lower leakage is required to meet the demands of three-dimensional (3D) dynamic random access memory (DRAM). Current morphotropic phase boundary (MPB) behavior exhibits a higher permittivity but relatively high leakage. In this work, we propose a feasible approach to achieve MPB and low leakage by the charge balance effect in the doped HfO2-ZrO2 superlattice system. Our first-principles calculations reveal that the synergy effect of doping and oxygen vacancies can achieve lower phase transition barriers between polar and nonpolar phases, suggesting the formation of more MPB regions. Especially for Y dopant, it is more preferred due to the smallest transition barrier. Additionally, defect states arising from oxygen vacancies can be passivized at the charge balance state to enable large bandgap, suppressing leakage currents. This work provides a potential solution for a dielectric material with a higher permittivity and a lower leakage, paving the way for future 3D DRAM capacitors.

Lossless single-molecule counting to absolute quantify proteoforms

Scientific Reports Tobias Gross, Tobias Hundertmark, Villő Csiszár et al. Mar 01, 2025 DOI: 10.1038/s41598-025-91053-5

Zwitterionic Photosensitizer‐Assembled Nanocluster Produces Efficient Photogenerated Radicals via Autoionization for Superior Antibacterial Photodynamic Therapy

Advanced Materials Ping He, Mingxuan Jia, Linfang Yang et al. Mar 01, 2025 DOI: 10.1002/adma.202418978

Abstract Photodynamic therapy (PDT) holds significant promise for antibacterial treatment, with its potential markedly amplified when using Type I photosensitizers (PSs). However, developing Type I PSs remains a significant challenge due to a lack of reliable design strategy. Herein, a Type I PS nanocluster is developed via self‐assembly of zwitterionic small molecule (C3TH) for superior antibacterial PDT in vivo. Mechanism studies demonstrate that unique cross‐arranged C3TH within nanocluster not only shortens intermolecular distance but also inhibits intermolecular electronic‐vibrational coupling, thus facilitating intermolecular photoinduced electron transfer to form PS radical cation and anion via autoionization reaction. Subsequently, these highly oxidizing or reducing PS radicals engage in cascade photoredox to generate efficient ·OH and O 2 ‾·. As a result, C3TH nanoclusters achieve a 97.6% antibacterial efficacy against MRSA at an ultralow dose, surpassing the efficacy of the commercial antibiotic Vancomycin by more than 8.8‐fold. These findings deepen the understanding of Type I PDT, providing a novel strategy for developing Type I PSs.

Kinetics insight into the roles of the N- and C-lobes of calmodulin in RyR1 channel regulation

Journal of Biological Chemistry Jingyan Zhang, Levy M. Treinen, Skylar J. Mast et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108258

Cs microcell optical reference at 459 nm with short-term frequency stability below 2 × 10−13

Applied Physics Letters E. Klinger, C. M. Rivera-Aguilar, A. Mursa et al. Mar 01, 2025 DOI: 10.1063/5.0261771

We describe the short-term frequency stability characterization of external-cavity diode lasers stabilized onto the 6S1/2−7P1/2 transition of Cs atoms at 459 nm, using a microfabricated vapor cell. The laser beatnote between two nearly identical systems, each using saturated absorption spectroscopy in a simple retroreflected configuration, exhibits an instability of 2.5 × 10−13 at 1 s, consistent with phase noise analysis, and 3 × 10−14 at 200 s. The primary contributors to the stability budget at 1 s are the FM-AM noise conversion and the intermodulation effect, both emerging from laser frequency noise. These results highlight the potential of microcell-based optical references to achieve stability performances comparable to that of an active hydrogen maser in a remarkably simple architecture.

Genome characteristics at the borders

Nature Reviews Molecular Cell Biology Marina Lusic Mar 01, 2025 DOI: 10.1038/s41580-024-00819-8

Nanoscale 3D spatial analysis of FTO/ZnO/Ag-x films subjected to photocatalytic activity

Scientific Reports Leila Chehreghani Anzabi, Azizollah Shafiekhani, Elham Darabi et al. Mar 01, 2025 DOI: 10.1038/s41598-024-82949-9

Photoinduced Cleavage of Respiratory Syncytial Virus by Chiral Vanadium Trioxide Nanoparticles

Advanced Materials Baimei Shi, Xinxin Xu, Maozhong Sun et al. Mar 01, 2025 DOI: 10.1002/adma.202420563

AbstractRespiratory syncytial virus (RSV) poses a significant threat to the health of infants, children, and the elderly, and as of now there is a lack of effective therapeutic drugs. To tackle this challenge, chiral vanadium trioxide nanoparticles (V2O3 NPs) with a particle size of 2.56 ± 0.34 nm are successfully synthesized, exhibiting a g‐factor value of 0.048 at 874 nm in terms of circular dichroism. Under 808 nm light irradiation, these chiral V2O3 NPs demonstrated selective cleavage of the RSV pre‐fusion protein (RSV protein), effectively blocking its conformational rearrangement and preventing RSV infection both in vitro and in vivo. Experimental analysis revealed that the chiral V2O3 NPs specifically bind to the functional domain spanning from aspartate200 (D200) to asparagine208 (N208) in the primary sequence of the RSV protein. Notably, L‐V2O3 NPs exhibited a higher affinity, which is 4.06 times that of D‐V2O3 NPs and 13.55 times that of DL‐V2O3 NPs. The precise cutting site is located between amino acid residues leucine204 (L204) and proline205 (P205), attributed to the reactive oxygen species (ROS) generated by photoinduced nanoparticles. In addition, L‐V2O3 NPs inhibited RSV infection by 99.6% in nasal epithelial cells and 99.2% in Vero cells. In the RSV‐infected mouse model, intranasal administration of L‐V₂O₃ NPs effectively controlled the viral load in the lungs of mice, reducing it by 92.43%. The hematoxylin and eosin staining of mouse organs and serum biochemical indicators are similar to those of the wild‐type group, indicating the biosafety of L‐V₂O₃ NPs. The findings suggest that chiral nanoparticles hold great potential in controlling RSV and provide new directions and ideas for drug development against viruses.

Advances in Oxygen Evolution Reaction Electrocatalysts via Direct Oxygen–Oxygen Radical Coupling Pathway

Advanced Materials Chengli Rong, Xinyi Huang, Hamidreza Arandiyan et al. Mar 01, 2025 DOI: 10.1002/adma.202416362

Abstract Oxygen evolution reaction (OER) is a cornerstone of various electrochemical energy conversion and storage systems, including water splitting, CO 2 /N 2 reduction, reversible fuel cells, and rechargeable metal‐air batteries. OER typically proceeds through three primary mechanisms: adsorbate evolution mechanism (AEM), lattice oxygen oxidation mechanism (LOM), and oxide path mechanism (OPM). Unlike AEM and LOM, the OPM proceeds via direct oxygen–oxygen radical coupling that can bypass linear scaling relationships of reaction intermediates in AEM and avoid catalyst structural collapse in LOM, thereby enabling enhanced catalytic activity and stability. Despite its unique advantage, electrocatalysts that can drive OER via OPM remain nascent and are increasingly recognized as critical. This review discusses recent advances in OPM‐based OER electrocatalysts. It starts by analyzing three reaction mechanisms that guide the design of electrocatalysts. Then, several types of novel materials, including atomic ensembles, metal oxides, perovskite oxides, and molecular complexes, are highlighted. Afterward, operando characterization techniques used to monitor the dynamic evolution of active sites and reaction intermediates are examined. The review concludes by discussing several research directions to advance OPM‐based OER electrocatalysts toward practical applications.

Differential producibility analysis reveals drug-associated carbon and nitrogen metabolite expressions in Mycobacterium tuberculosis

Journal of Biological Chemistry Ye Xu, Ruma Banerjee, Sunitha Kasibhatla et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108288

6-in. high-voltage GaN-based E-mode HEMTs with ultrathin barrier structures: Interface quality and its reliability

Applied Physics Letters Nan Sun, Ronghua Wang, Huolin Huang et al. Mar 01, 2025 DOI: 10.1063/5.0260365

In this Letter, high-voltage enhancement-mode (E-mode) GaN-based power devices were demonstrated by employing an ultrathin barrier epitaxial structure. We investigated the effects of interface states introduced by the barrier etching process on the devices' reliability by fabricating and comparing metal–insulator–semiconductor (MIS)-field effect transistors (FETs) without an AlGaN barrier layer and MIS-high electron mobility transistors (MIS-HEMTs) with a barrier layer. The threshold voltages (Vth) of the fabricated MIS-HEMT and MIS-FET reach 0.14 and 2.5 V, respectively. Meanwhile, the fabricated devices exhibited a high off-state breakdown voltage over 1500 V. Compared to high interface trap density (Dit) at the SiN/GaN interface of MIS-FET, a much lower Dit was found at the SiN/AlGaN interface of MIS-HEMT owing to the barrier recess-free process. Thus, the MIS-HEMT exhibits a negligible Vth shift tested via positive bias temperature instability, which is crucial in the practical application for the E-mode operation. Furthermore, a scheme of extracting the Dit of the devices from the flatband voltages (VFB) shift of C–V curves was developed, and the accuracy of the scheme was verified by multi-frequency C–V tests.

Image steganalysis using active learning and hyperparameter optimization

Scientific Reports Li Bohang, Ningxin Li, Jing Yang et al. Mar 01, 2025 DOI: 10.1038/s41598-025-92082-w

Thermal Transport in Chalcogenide‐Based Phase Change Materials: A Journey from Fundamental Physics to Device Engineering

Advanced Materials Kiumars Aryana, Cosmin Constantin Popescu, Hongyi Sun et al. Mar 01, 2025 DOI: 10.1002/adma.202414031

Abstract Advancements in nanofabrication processes have propelled nonvolatile phase change materials (PCMs) beyond storage‐class applications. They are now making headway in fields such as photonic integrated circuits (PIC), free‐space optics, and plasmonics. This shift is owed to their distinct electrical, optical, and thermal properties between their different atomic structures, which can be reversibly switched through thermal stimuli. However, the reliability of PCM‐based optical components is not yet on par with that of storage‐class devices. This is in part due to the challenges in maintaining a uniform temperature distribution across the PCM volume during phase transformation, which is essential to mitigate stress and element segregation as the device size exceeds a few micrometers. Understanding thermal transport in PCM‐based devices is thus crucial as it dictates not only the durability but also the performance and power consumption of these devices. This article reviews recent advances in the development of PCM‐based photonic devices from a thermal transport perspective and explores potential avenues to enhance device reliability. The aim is to provide insights into how PCM‐based technologies can evolve beyond storage‐class applications, maintain their functionality, and achieve longer lifetimes.

Modulation of the substrate preference of a MYST acetyltransferase by a scaffold protein

Journal of Biological Chemistry Raghuvir N. Sengupta, Oleg Brodsky, Patrick Bingham et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108262