Advanced Materials
Articles in this Issue
In‐situ p‐Doping of Nanometer Tellurium‐based Oxide for Room‐Temperature CMOS Circuits
ABSTRACT The development of high‐performance p ‐type oxide semiconductors is crucial for scalable CMOS technologies, yet...
Digital Microneedles for Multiplexed Transdermal Sensing via Fluorescent QR Codes (Adv. Mater. 36/2026)
In‐situ p‐Doping of Nanometer Tellurium‐based Oxide for Room‐Temperature CMOS Circuits (Adv. Mater. 36/2026)
Intelligent Acousto‐Electrical Metamaterials (IAM) for Sound Source Detection (Adv. Mater. 36/2026)
Large‐Area 2D Metasurface‐Based Triboelectric E‐Skin Arrays: Contact & Proximity Tactile Mapping with Broadband Acoustic Readouts
ABSTRACT Recent advances in electromechanically coupled, self‐powered, flexible transducer‐enabled electronic skins are predominantly driven by the capacitive triboelectric nanogener...
Large‐Area 2D Metasurface‐Based Triboelectric E‐Skin Arrays: Contact & Proximity Tactile Mapping with Broadband Acoustic Readouts (Adv. Mater. 36/2026)
The Resolution–Throughput Conflict In Material Extrusion Additive Manufacturing (Adv. Mater. 36/2026)
Digital Microneedles for Multiplexed Transdermal Sensing via Fluorescent QR Codes
ABSTRACT Real‐time biochemical sensing is essential for precision medicine, yet current wearable and transdermal biosensors suffer from signal drift, calibration demands, and limited...
Intelligent Acousto‐Electrical Metamaterials (IAM) for Sound Source Detection
ABSTRACT Acoustic transducers are essential for object localization and environmental sensing. Conventional transducers rely on piezoelectric crystals, whose acoustic‐electric respon...
Ultra‐High Dielectric Acceptor Enables 21% Efficiency and Thickness‐Insensitive Organic Solar Cells
ABSTRACT Dielectric constant (ε r ) of non‐fullerene acceptors (NFAs) is a crucial parameter in organic solar cells (OSCs...
Water‐Triggered Structural Transformation in a Silver Chalcogenolate Cluster‐Based MOF (SCC‐MOF) Enables Visually Readable Trace Water Sensing
ABSTRACT Monitoring trace water is vital for chemical processes and moisture‐sensitive materials, but conventional electrical humidity sensors require complex in...
High‐Density Co–Ir–Co Triple‐Atom Sites in Salphen‐Fused Nanoribbons Break the Activity‐Stability Dilemma in Alkaline Oxygen Evolution
ABSTRACT The development of stable, active, and well‐defined electrocatalysts for water oxidation is vital for large‐scale green hydrogen production. However, th...
Modulating Coplanarity of Polymer Acceptor Facilitates Hierarchical All‐Polymer Heterojunction for Efficient and Stable Semitransparent Solar Cells
ABSTRACT All‐polymer‐based semitransparent organic solar cells (ST‐OSCs) are better‐suited candidates than small‐molecule analogues for building‐integrated photo...
Boosting Solid–Solid Conversion Kinetics via Electron‐Pinned Interface Engineering for High‐Energy‐Density Li‐S Batteries
ABSTRACT The pursuit of high‐energy‐density lithium–sulfur (Li–S) batteries necessitates the use of lean electrolyte conditions. However, this goal is severely h...
Coordination‐Induced Reconstruction Optimizes Spatial Arrangements of Heterogeneous Yet Cooperative Sites to Boost Oxygen Reduction Kinetics
ABSTRACT Control over the spatial arrangement of heterogeneous yet cooperative sites is highly desirable yet challenging to enhance reaction kinetics. This study...
Suppressing Surface Degradation in Na‐Rich Prussian Blue Cathodes via Liquid‐Phase Dehydration
ABSTRACT Na‐rich Prussian Blue (PB) is an attractive sodium‐ion battery cathode owing to its high capacity and low cost, yet approximately 10 wt.% of crystal water in its framework i...
Multifunctional Buffer Layer for Bolstering the Stability and Photovoltaic Performance of Perovskite Solar Cells
ABSTRACT Despite the impressive power conversion efficiency (PCE) of perovskite solar cells (PSCs), their long‐term operational stability remains compromised by...
Digital Light Processing of Three‐dimensional Liquid Metal Hydrogels
ABSTRACT Liquid metal (LM) hydrogels emerge as promising materials for flexible electronics and soft robotics, but they are challenged by simplistic structure, limited precision, and...
Flexible Perovskite/Silicon Tandem Solar Cells Exceeding 30% Efficiency at Scale
ABSTRACT Flexible perovskite/silicon tandem solar cells (FTSCs) represent a frontier for high‐power‐density, conformable electronics, yet their commercial viabil...
Cationic Potential‐Driven Surface Reconstruction Enables Stable High‐Voltage Cylindrical Sodium‐Ion Batteries
ABSTRACT Reconciling the trade‐off between high specific capacity and high‐voltage structural stability is the “holy grail” for advanced sodium‐ion batteries. Wh...
Ultra‐Confinement of Polaritons in Single Atomic Layer Ag Photonic Quantum Dots
ABSTRACT Light scattering by two‐dimensional (2D) van der Waals heterostructures (vdWHs) is immense, especially given their infinitesimal volume, thus enabling s...
Correction to “Rigidity‐Flexibility Regulation and Hard‐Soft Donor Combination: Dual Strategies in Covalent Organic Frameworks Construction for Actinides/Lanthanides Separation”
Interlocked Interface Enhances Mechanical Integrity for Thermal‐Cycling‐Stable Perovskite Solar Cells With 26.82% Certified Efficiency
ABSTRACT Perovskite solar cells (PSCs) experience mechanical damage and failure (i.e. degradation and fracture) induced by temperature changes under thermal cycling. However, few stu...
Ionic‐Liquid‐Triggered Amorphization Engineers Symmetry‐Breaking <i>p</i> ‐Block Bismuth Oxides with Electric Dipole Domains for Practical Lithium‐Sulfur Batteries
ABSTRACT The practical application of lithium‐sulfur batteries is severely hindered by the sluggish sulfur redox kinetics and the notorious lithium polysulfides...
Stable Energy‐Level Regulation of NiO <i> <sub>x</sub> </i> for Efficient Deep‐Blue Perovskite LEDs
ABSTRACT NiO x offers tunable energy‐level via interfacial molecular modifica...