Advanced Materials
Articles in this Issue
Synergistic Geometric and Interfacial Regulation of Silane‐Modified Biomass Aerogels for Sustainable, Low‐Resistance Particulate Filtration
ABSTRACT Particulate matter pollution poses a threat to public health, necessitating the development of high‐efficiency, sustainable air filters. Bacterial cellu...
Economic Low‐Carbon Chemical Production via Paired Electrolysis of Carbon Monoxide (CO) and 5‐hydroxymethylfurfural (HMF)
ABSTRACT Paired electrolysis of CO 2 and biomass‐derived alcohols, such as 5‑hydroxymethylfurfural (HMF) and glycerol, of...
Methanol‐Ethanol Discrimination and Selective Sensing Enabled by Molecular Sieving in Conductive MOFs
ABSTRACT Methanol presents a significant health risk because of its volatility and toxicity. Its close chemical similarity to ethanol increases the likelihood of accidental ingestion...
Solid–Liquid Synergy Enables a Trisulfur‐Radical‐Rich Microenvironment for Accelerated Li–S Conversion Kinetics
ABSTRACT Understanding and regulating the rate‐determining steps (RDSs) of lithium–sulfur batteries (LSBs) is crucial for enhancing their electrochemical perform...
Dynamic Circular Sulfur‐Rich Polymer Glasses From Elemental Sulfur
ABSTRACT Elemental sulfur (S 8 ) is a commodity‐priced petroleum byproduct suitable for upcycling as a neat molten medium...
Theory Guided Fine‐Tune of Strain Effects in Pt Ternary Alloy via Rare Earth Templating: Achieving High Performance PEMFCs Catalysts
ABSTRACT The sluggish kinetics and insufficient durability of platinum‐based catalysts remain crucial barriers limiting proton‐exchange‐membrane fuel cells (PEMF...
Glucose‐Oxidase Conjugated Cerium Oxide‐Based Super Nanozyme for Rapid MRSA Eradication and Wound Closure
ABSTRACT The global rise of antibiotic‐resistant pathogens poses a serious challenge to public health, particularly in the healing of infected chronic wounds. In...
Versatile Nano‐Crosslinker Enhanced Injectable Hydrogel Toward Rapid Hemostasis and Efficient Trauma Repair
ABSTRACT Uncontrolled traumatic hemorrhage, often complicated by infection and poor healing, accounts for over 30% of trauma‐related deaths worldwide. Injectable...
Reconciling High‐κ and Wide‐Bandgap Dielectrics (TbOCl) with Intrinsic Stability in 2D Electronics
ABSTRACT The practical implementation of two‐dimensional (2D) transistors is fundamentally limited by the lack of gate dielectrics that can simultaneously delive...
High‐Yield Engineering and Identification of Oxygen‐Related Modified Divacancies in 4H‐SiC
ABSTRACT Modified divacancies in the 4H polytype of silicon carbide (SiC) exhibit enhanced charge stability and spin addressability at room temperature, making them attractive for qu...
20.31% Efficiency Layer‐by‐Layer Organic Solar Cells Enabled by 3D Side‐Chain Topology‐Driven Dual‐Fiber Interpenetrating Networks
ABSTRACT Constructing robust nanofibrillar networks in layer‐by‐layer (LbL) organic solar cells (OSCs) is challenging since small‐molecule acceptors lack polymer‐like interlocking ca...
A Panoramic View on Plastic Waste Recycling and Upcycling: Heterogeneous Catalytic Strategies for Diverse Plastics and Multiple Pathways
ABSTRACT Plastics have become integral to modern society due to their low cost, versatility, and practicality. However, their rapid production and limited lifespan have led to the ac...
Wooden‐Monolithic Catalytic Microreactors: Construction Strategy, Structural Regulation, and Advanced Energy and Environmental Applications
ABSTRACT The increasing demands for sustainable catalysis and carbon neutrality are driving the need for the development of green, scalable, and multifunctional reaction platforms. T...
Perspective on Material Design and Interface Engineering toward Low‐Stack‐Pressure All‐Solid‐State Lithium Batteries
ABSTRACT All‐solid‐state lithium batteries (ASSLBs) have garnered worldwide attention as promising next‐generation energy storage technologies owing to their high energy densities an...
Synergistic Modulation of Crystallization Kinetics and Interface Energy‐Level Alignment for Efficient Perovskite/Silicon Tandem Solar Cells
ABSTRACT Increasing bromine content is a common strategy for widening the bandgap of perovskite materials. However, this often accelerates crystallization, there...
High‐Performance Flexible Pyroelectric Energy Harvesting System Enabled by Light‐Driven Thermomechanical Coupling in Liquid Crystal Elastomer (Adv. Mater. 35/2026)
A Design Strategy for Durable Anionic Redox via Fluorine‐Induced Electronic Structure Modulation in In Situ Formed Disordered Phases (Adv. Mater. 35/2026)
Galvanic Replacement Synthesis Enabled by Gallium‐Based Liquid Metal: A Powerful Route for Material Design and Versatile Applications
ABSTRACT The precise engineering of core–shell or hollow metallic nanoarchitectures has become a central pursuit in fundamental research and advanced technologies. Among the availabl...
Chiral Manganese Halide Co‐Crystals: A New Avenue for Efficient Circularly Polarized Luminescence
ABSTRACT Chiral metal halides have emerged as promising candidates for circularly polarized luminescence (CPL) due to their structural versatility and exceptiona...
Galvanic Replacement Synthesis Enabled by Gallium‐Based Liquid Metal: A Powerful Route for Material Design and Versatile Applications (Adv. Mater. 35/2026)
Freeform Manufacturing of Plant‐Based Structural Colors for Scalable Photonic and Mechanochromic Devices (Adv. Mater. 35/2026)
Artificially Designed 2D Composite Material With Tailored Thermal Expansion Toward Temperature‐Stable and Accurate Nanomechanical Pressure Sensors
ABSTRACT Two‐dimensional (2D) materials are suitable for constructing resonant nanoelectromechanical systems (NEMS) toward advanced sensing applications, due to...
Mixed‐Isomers Strategy for Thermally Stable and High‐Performance Thick‐Film All‐Small‐Molecule Organic Solar Cells
ABSTRACT All‐small‐molecule organic solar cells (all‐SMOSCs) have emerged as promising candidates for next‐generation photovoltaic technologies due to their advantages in chemical tu...
High‐Performance Flexible Pyroelectric Energy Harvesting System Enabled by Light‐Driven Thermomechanical Coupling in Liquid Crystal Elastomer
ABSTRACT Liquid crystal elastomers (LCEs) with reversible thermal actuation are promising platforms for multifunctional flexible electronics. Herein, we present...
Tailoring of Layered Bismuth‐Based Materials: Advanced Functionalities for Environment, Energy, Photonics, Electronics, and Biomedicine
ABSTRACT Layered bismuth‐based materials exhibit exceptional potential for a wide range of advanced functional applications, enabled by their versatile structural chemistry and tailo...