Browse Articles
Discover research articles across all indexed journals
Slow dynamical modes from static averages
In recent times, efforts have been made to describe the evolution of a complex system not through long trajectories but via the study of probability distribution evolution. This more collective approach can be made practical using the transfer operator formalism and its associated dynamics generator. Here, we reformulate in a more transparent way the result of Devergne et al. [Adv. Neural Inform. Process. Syst. 37, 75495–75521 (2024)] and show that the lowest eigenfunctions and eigenvalues of the dynamics generator can be efficiently computed using data easily obtainable from biased simulations. We also show explicitly that the long time dynamics can be reconstructed by using the spectral decomposition of the dynamics operator.
Engineering strong magnon–phonon coupling in single CoFe nanomagnets
Hybrid magnonic systems are promising platforms for quantum technologies, leveraging coherent coupling between magnons and phonons. Here, we demonstrate strong magnon–phonon coupling in CoFe nanomagnets, a material with high magnetostriction. Using time-resolved magneto-optical Kerr effect spectroscopy, we demonstrate strong coupling between magnonic and phononic modes in both polycrystalline and single-crystalline CoFe nanomagnets. Our findings reveal strong coupling with cooperativity values of C=20.04 for a polycrystalline CoFe nanomagnet and C=37.94 for a single-crystalline CoFe nanomagnet. The enhanced coupling strength in the single-crystalline CoFe nanomagnet is attributed to the higher magnetostriction in CoFe systems and lower intrinsic magnetic damping. This work highlights the critical role of material properties and crystalline structures in optimizing hybrid magnon–phonon systems for miniaturized quantum applications.
Morphology regulation during mechanochemistry synthesis activating nanostructured aluminum lithium storage behavior
Aluminum (Al) is a potential anode material for lithium-ion batteries due to its high theoretical capacity and low volume expansibility. However, scalable fabrication of nanostructured Al still faces a great challenge. In addition, the lithium storage performance of Al anode materials always encounters a severe strike within a dozen discharge/charge cycles, and such an abnormal behavior of the Al anode material remains enigmatic. Herein, a mechanochemistry method without using any solvent is developed to achieve scalable production of Al nanoparticles and the morphology of the obtained Al nanoparticles could be regulated using Ketjen black (KB). KB with a chain-like structure could regulate the Al crystal growth process and the aggregation of Al nanoparticles during the solid-phase reaction, shortening the electron transfer path among Al crystals, ultimately activating the lithium storage behavior of nanostructured Al. Initial discharge/charge capacities of 630.6 and 402.0 mA h g−1 were achieved at 50 mA g−1; unfortunately, the nanostructured Al still suffered from rapid deterioration of lithium storage performance. Comprehensive analysis demonstrated that the raised energy barrier of LiAl formation and the slow lithium diffusion kinetics in the Al matrix may be the main factors destroying the lithium storage performance of the Al anode material. This work provided more evidence for illustrating the lithium storage behavior of the Al anode.
Calculation of the melting curve, shock Hugoniot, and ramp adiabat of nickel up to the super-Earth pressure–temperature range
Nickel is one of the most plentiful elements in the metallic core of rocky planets, but its geophysical properties remain ambiguous at elevated pressures and temperatures. In this study, we develop the statistical moment method to explore geophysically important routes on the phase diagram of nickel up to 4000 GPa and 20 000 K. First, the solid–liquid boundary is constructed via the modified work-heat equivalent principle. Our theory shows a dramatic growth in the melting point of nickel during compression, consistent with the latest static experiments and atomistic simulations. It also reveals the high risk of carbon contamination in diamond anvil cells and the vital role of nickel as a fcc stabilizer in iron–nickel binaries. Next, we revisit the principal Hugoniot in pressure–density and pressure–temperature spaces. The onset of melting is detected at 258 GPa, 13.50 g/cm3, and 6050K, which agree well with recent thermodynamic calculations. It is feasible to access warmer and denser crystalline regions by going along second-shock Hugoniot branches. Finally, we provide detailed information about the solid adiabats of nickel under extreme conditions. Our numerical data would be valuable for developing dynamic compression techniques to capture the geophysical characteristics of nickel in the high-energy-density regime.
Constrained dipole moment density functional theory for the calculation of the charge-transfer energy in non-covalent complexes
The original constrained dipole moment density functional theory allows one to control the magnitude of the molecular dipole moment in a variational and non-empirical way. In this work, we extend this methodology to control the three Cartesian components of the molecular dipole moment. The new theoretical development is suitable for the calculation of the charge-transfer energy contributions to the total interaction energies in non-covalent complexes. To test the reliability of the theoretical development, we form three sets of non-covalent complexes from the literature with a total of fifty-one systems. The former set of complexes includes many different types of non-covalent interactions, the second set consists of prototypical non-covalent complexes and three biologically relevant interactions between DNA base pairs, and the third set comprises halogen bonding complexes. We determined the charge-transfer energy contributions and the total interaction energies of all these complexes. The calculated charge-transfer energies are in very good agreement with the ones calculated using the fragment-based Hirshfeld methodology, which has been proven to be reliable. Nevertheless, the new procedure relies on the molecular dipole moment, which is observable, while the fragment-based Hirshfeld methodology relies on a definition of a population analysis.
Solid–liquid interface stability in solidification of a binary mixture under conductive transport and convective flow
A linear instability analysis of the planar solid–liquid interface propagating into a binary liquid is revisited for a steady-state mode of crystallization. The model statement includes convective and conductive transport of heat and mass in bulk phases together with these transfer contributions at the solid–liquid interface. Following our analysis [D. V. Alexandrov and P. K. Galenko, “The Mullins-Sekerka theory: 60 years of morphological stability,” J. Appl. Phys. 136 (2024) 055103], it is shown that the directional solidification with the convective and conductive transport also becomes possible only if the finite distance h of the solidification front from the cooling unit (cold boundary) exists and is taken into account in the formal analysis. If the cooling unit is removed from the interface to the spatially infinite distance (as accepted in many previous works), the directional solidification stops. The obtained dispersion relation for the system with the conductive and convective transport takes into account the existence of perturbations appearing from the cooling unit, solid–liquid interface, and bulk liquid. Therefore, the range of instability essentially depends on the distance h and friction velocity of the flow, which characterizes the liquid convection and convective contributions of heat and mass fluxes. Special cases of bounded and unbounded solidification domains that may affect the front instability are investigated. It is shown that within the bounded domain perturbations from convective flow or temperature fluctuations affect the solid–liquid interface more strongly than in the unbounded domain. This effect leads to a broader range of wavenumbers that provide the front instability.
Radical scavenging rate constants determined by spin relaxation times of electron spin polarized radicals as measured by free induction decay signals
Radical scavenging reaction rate constants were measured by monitoring the free induction decay (FID) of the unpaired electron of radicals by using laser-synchronized pulsed-EPR. This method probes large electron spin magnetization arisen from dynamic electron spin polarization (DEP), which remarkably enhances the EPR signal. DEP decays with the longitudinal spin relaxation time, which was observed by using the FID detection method. In the presence of a radical scavenger, the DEP decay time depends on both spin-lattice relaxation and the chemical reaction with the scavenger, the latter of which reduces radical concentration. The plots of DEP decay rates against the radical scavenger concentrations gave the pseudo-first-order reaction rate constants for various radicals. This procedure was applied to determine the radical scavenging reaction rate constants of hydroxycyclohexyl, 2-hydroxypropyl, diphenylphosphinoyl, and α,α-dimethoxybenzyl radicals. The measured rate constants show good agreement with the previously reported values determined by using another method monitoring electron spin echo (ESE) decays of the radicals. We discussed the advantageous and disadvantageous characters of the FID detection method with respect to the existing ESE method in the viewpoints of signal intensity, selectivity of radicals, the simpleness of the measurements, and so on.
Cosmic ray radiography of a human phantom
Cosmic ray muons that reach the earth's surface provide a natural source of radiation that is used for radiography. In this paper, we show that radiography using the cosmic radiation background provides a method that can be used to monitor bulk aspects of human anatomy. We describe a method that can be used to measure changes in patients as a function of time by cosmic ray muon radiography. Modeling shows muon tomography could provide hourly readouts of parameters such as lung density with sufficient sensitivity to detect the time changes in the inflammation of the lungs in, e.g., COVID patients.
Energy decomposition analysis method with the DFT-in-xTB embedding strategy for intermolecular interactions in large systems
In this work, an energy decomposition analysis (EDA) method, termed DM-EDA(EB), is introduced to explore intermolecular interactions in large systems by employing a DFT-in-xTB embedding scheme. DM-EDA(EB) integrates density matrix-based EDA (DM-EDA) with the GFNn-xTB method to decompose the total interaction energy into electrostatic, exchange–repulsion, polarization, and correlation terms. Test cases demonstrate that DM-EDA(EB) can accurately analyze total interaction energies in large systems with the computational efficiency comparable to GFNn-xTB. Notably, by using the appropriate partition strategy, DM-EDA(EB) is able to provide quantificational knowledge of individual interactions in large assemblies.
Experimental investigation on nanowire array irradiated with ultrahigh intensity laser at x-ray free electron laser facility SACLA: Fabrication of nanowire array target and its application to ultrafast time-resolved measurements
Nanowire arrays—vertically aligned metal wires with a few hundred nanometers in diameter—are promising nano-structured targets for high-energy-density physics and related applications. We have been developing ultrafast, time-resolved measurements on laser-irradiated targets using the x-ray free electron laser at the SACLA facility. Here, we present fabrication of various kinds of nanowire array in order to explore the absorption mechanism with ultrahigh intensity laser irradiation, and their application to the laser-irradiation experiment is performed at the SACLA facility. To fabricate nanowire arrays with control over their spatial and material parameters, we have developed an approach using an anodic aluminum oxide template and electroplating processes. The nanowire array samples were applied for ultrahigh intensity laser experiments, which coupled with x-ray free-electron-laser facility SACLA. We characterized fundamental “static” data on transmittance calibration for x-ray shadowgraph measurements. We also evaluated the effect of a pre-pulse on spatial changes of a nanowire, showing that the shape of the nanowires was maintained up to a few picoseconds after laser irradiation. On the preliminary laser-irradiation experiments, we observed time-resolved, two-dimensional x-ray images and observed the x-ray transmittance change due to the heating process.
Simulating many-body open quantum systems by harnessing the power of artificial intelligence and quantum computing
Simulating many-body open quantum systems (OQSs) is challenging due to the intricate interplay between the system and its environment, resulting in strong quantum correlations in both space and time. This Perspective presents an overview of recently developed theoretical methods using artificial intelligence (AI) and quantum computing (QC) to simulate the dynamics of these systems. We briefly introduce the dissipaton-embedded quantum master equation in second quantization, which provides a single master equation suitable for representation by neural quantum states or quantum circuits. The promising performance of AI- and QC-based approaches is demonstrated through preliminary research on simulating the quantum dissipative dynamics of many-body OQSs. We also discuss the limitations and future developments of these methods, which hold promise for overcoming the computational challenges associated with many-body OQS dynamics.
Deciphering the full spectrum of phonon scattering by point defects
The change in mass and induced strain effects at the point defect sites lead to phonon scattering, which, in turn, reduces thermal conductivity. The scattering mechanism of phonons typically depends on the relative relationship between the defects and the phonon wavelength. Traditional views suggest that point defects give rise to additional modes with specific frequency, exhibiting fixed scattering patterns. However, experimental results in real materials reveal controversy and a range of scattering behaviors, suggesting that the interaction between phonons and point defects varies with wavelength. This phenomenon has yet to be systematically studied. This study introduces a novel approach using spectral energy density based on molecular dynamics simulations to explore the scattering behavior of phonons of different wavelengths by point defects in large-scale material systems. We found that multiple scattering patterns coexist in the phonon scattering behavior of point defects, with different phonon frequencies showing varying frequency-dependent scattering rates. We provided profound insights into the design of materials with tailored thermal conductivities, highlighting the significant role of point defects in modulating thermal transport properties.
Non-equilibrium coexistence between a fluid and a hotter or colder crystal of granular hard disks
Non-equilibrium phase coexistence is commonly observed in both biological and artificial systems, yet understanding it remains a significant challenge. Unlike equilibrium systems, where free energy provides a unifying framework, the absence of such a quantity in non-equilibrium settings complicates their theoretical understanding. Granular materials, driven out of equilibrium by energy dissipation during collisions, serve as an ideal platform to investigate these systems, offering insights into the parallels and distinctions between equilibrium and non-equilibrium phase behavior. For example, the coexisting dense phase is typically colder than the dilute phase, a result usually attributed to greater dissipation in denser regions. In this article, we demonstrate that this is not always the case. Using a simple numerical granular model, we show that a hot solid and a cold liquid can coexist in granular systems. This counterintuitive phenomenon arises because the collision frequency can be lower in the solid phase than in the liquid phase, consistent with equilibrium results for hard-disk systems. We further demonstrate that kinetic theory can be extended to accurately predict phase temperatures even at very high packing fractions, including within the solid phase. Our results highlight the importance of collisional dynamics and energy exchange in determining phase behavior in granular materials, offering new insights into non-equilibrium phase coexistence and the complex physics underlying granular systems.
Calculation and verification of optical diffraction performance of random metallic meshes
In this paper, the optical diffraction performance calculation method of random metallic meshes based on the secondary wavelet source far-field coherent superposition is proposed. First, the random mesh pattern to be calculated is processed into a two-dimensional matrix with binary data (0/1). The final diffraction result can be obtained by summing the amplitude distribution of the diffracted light from the binary data 1 (blank region) and 0 (metal line region) in the sample region based on the secondary wave source superposition method. To verify the validity of the calculation, a random metal mesh sample was tested using the crack template method. The calculation results show that the maximum amplitude of the sample's high-order diffraction distribution normalized intensity is −27.5 dB. In comparison, the measured result is −28.2 dB, which is in good agreement with the calculation result. Since it is no longer limited to the periodic regular network structure, the calculation result of optical diffraction performance is greatly simplified. The optical diffraction performance calculation method proposed in this paper is applicable to various network structures, especially for random network structures, whose optical diffraction performance can be obtained without measurement processing. It will effectively promote the research on the optical diffraction performance of random metallic meshes.
Adsorption behavior analysis of CNCl on transition metal-doped fluorinated diamanes: A first-principles study
Cyanogen chloride (CNCl) is a toxic chemical that poses significant risks to human health and the environment; therefore, its level must be accurately monitored. Herein, the adsorption of CNCl by transition metal-doped fluorinated diamanes (F-diamanes) has been extensively studied via first-principles calculations. Key parameters such as adsorption energies, charge transfer amounts, bandgaps, sensitivity, densities of states, projected density of states, charge density differences, and recovery time were systematically analyzed. Results reveal that monometallic doping significantly enhances CNCl adsorption, with increases in adsorption energy by 164%–368% and charge transfer by 1234%–1571%, particularly in the AuFD-CNCl, AgFD-CNCl, and CuFD-CNCl systems, which demonstrated improved sensing performances. Similarly, bimetallic co-doping further strengthened adsorption, with energy enhancements of 277%–309% and charge transfer increases of 1238%–1505%. Au-CuFD-CNCl, Au-AgFD-CNCl, and Cu-AgFD-CNCl systems also showed superior sensing performances. Meanwhile, the recovery time of CNCl molecules on the AuFD, AgFD, Au-CuFD, and Au-AgFD surfaces was drastically reduced to acceptable levels at 279–412 K, leading to their desorption. Therefore, these four systems exhibited excellent reversibility properties, suggesting their applicability in gas-sensing applications. This work can facilitate the applications of doped F-diamanes in environmental conservation, energy storage, and chemical engineering.
Anomalous eddy current loss in soft magnetic materials via Maxwell equations-coupled multiscale micromagnetic simulations
Unveiling the underlying mechanism of iron loss in soft magnetic materials is crucial for advancing power electronics. Despite its significance, anomalous eddy current loss, a part of iron loss, remains insufficiently understood due to the complexity of magnetic domain dynamics. In this study, we performed multiscale micromagnetic simulations, coupling Maxwell equations with the Landau–Lifshitz–Gilbert equation, to investigate how the operating frequency and defect size affect iron losses. Our results revealed that as the frequency increases, localized eddy currents are intensified, leading to increased overall energy dissipation. This frequency-driven transition reflects a shift from domain wall movement to magnetization rotation and is accompanied by an increase in magnetostatic energy. Additionally, the presence of larger defects increases exchange energy and eddy current density, which, in turn, amplifies the total iron loss by promoting domain wall movement. These findings offer valuable insights into the transition in magnetization reversal modes and the associated energy loss mechanisms, providing a foundation for designing low-loss soft magnetic materials.
Challenges in determining the thermal conductivity of core–shell nanowires by atomistic simulation
In the present work, we investigate the thermal conductivity (κ) of different core–shell nanowires using molecular dynamics simulation and Green–Kubo (EMD), imposing a temperature gradient (NEMD) and Müller-Plathe (rNEMD) approaches. We show that in GaAs@InAs nanowires, the interface effect becomes more significant than the nanowire cross-sectional geometry. In particular, κ decreases as the interface area increases, reaching a minimum, and then increases when the interface strain relaxes. This is particularly important for thermoelectric applications, where minimization of κ is desired. In particular, the different methods can predict minima at different core diameters without special considerations. In addition, the NEMD approach and, to a lesser extent, rNEMD tend to overestimate the κ values, which cannot be corrected with the methods available in the literature. By analyzing the temperature and length dependence, (I) we show that interfacial scattering primarily involves phonon–phonon interactions, which mainly affect low-energy modes, a mechanism that effectively reduces κ at low temperatures. (II) The Langevin thermostat tends to pump low-energy modes in the NEMD approach, but this effect decreases with longer nanowires. (III) Energy exchanges in rNEMD stimulate high-energy phonons, derived from the saturation of κ at a much shorter nanowire length than NEMD. These findings highlight the challenges of accurately determining κ of ultrathin core–shell nanowires, where only the EMD approach provides precise results. With the recognition of non-equilibrium contributions to the overestimation of κ by NEMD and rNEMD, these methods can still provide valuable insights for a comprehensive understanding of the underlying thermal transport mechanisms.
Ultra-low lattice thermal conductivity in 18 VEC quaternary Heusler alloys—Efficient thermoelectric materials
Quaternary Heusler alloys are known for their distinctive electrical and thermal properties, present fascinating opportunities for improving thermoelectric performance. By leveraging the unique characteristics of these alloys and employing advanced design strategies, we can drive significant improvements in waste heat treatment. In the present study, we have identified novel stable quaternary Heusler alloys guided by the 18-valence electron rule through ab initio calculations. The ground state properties of presented alloys have studied using the generalized gradient approximation, whereas the accurate bandgap values have been determined using mBJ and GGA + U. The Boltzmann transport equation is used to investigate the thermoelectric properties of the alloys. The alloys are stable at room temperature and even at a high temperature of 900 K. The investigated quaternary Heusler alloys, MgZrFeSn and MgHfFeSn have indirect bandgaps of 0.69 eV and 0.77 eV, respectively, under mBJ approximation. The presence of flatbands and degenerated valley bands near the edges of the conduction and valence bands significantly enhance both the Seebeck coefficient and electrical conductivity of the alloys. Strong interactions between acoustic and optical phonon modes result in low lattice thermal conductivity of 0.58 and 1.49 W/m K at 900 K. This leads to high figure of merit of 1.28 and 1.55 for MgZrFeSn and MgHfFeSn, respectively, indicating their potential for advanced thermoelectric materials.
Polariton-induced Purcell effects via a reduced semiclassical electrodynamics approach
Recent experiments have demonstrated that polariton formation provides a novel strategy for modifying local molecular processes when a large ensemble of molecules is confined within an optical cavity. Herein, a numerical strategy based on coupled Maxwell–Schrödinger equations is examined for simulating local molecular processes in a realistic cavity structure under collective strong coupling. In this approach, only a few molecules, referred to as quantum impurities, are treated quantum mechanically, while the remaining macroscopic molecular layer and the cavity structure are modeled using dielectric functions. When a single electronic two-level system embedded in a Lorentz medium is confined in a two-dimensional Bragg resonator, our numerical simulations reveal a polariton-induced Purcell effect: the radiative decay rate of the quantum impurity is significantly enhanced by the cavity when the impurity frequency matches the polariton frequency, while the rate can sometimes be greatly suppressed when the impurity is near resonance with the bulk molecules forming strong coupling. In addition, this approach demonstrates that the cavity absorption of light exhibits Rabi-splitting-dependent suppression due to the inclusion of a realistic cavity structure. Our simulations also identify a fundamental limitation of this approach—an inaccurate description of polariton dephasing rates into dark modes. This arises because the dark-mode degrees of freedom are not explicitly included when most molecules are modeled using simple dielectric functions. As the polariton-induced Purcell effect alters molecular radiative decay differently from the Purcell effect under weak coupling, this polariton-induced effect may facilitate understanding the origin of polariton-modified photochemistry under electronic strong coupling.
Thermomagnetically controlled setting of double-biased hysteresis in NiFe/IrMn films with a single ferro-antiferromagnet interface
Exchange bias of NiFe/IrMn and NiFe/Cu/IrMn structures was modulated by thermal exposures in a magnetic field. The temperature ramping cycles consisted of three phases: Heating from room temperature (RT) 22 °C to exposure temperature TEXP (heating phase), exposure at TEXP with applied field HEXP (settled phase), and cooling from TEXP down to 22 °C (cooling phase). Contributions of these phases into resulting exchange bias in the exposed sample are distinguished. Dynamic exposure with the field applied during heating and cooling leads to a gradual shift of the RT M(H) loop from negative to positive fields. Static exposure with the field on when the temperature is settled only leads to the formation of a complex transitional hysteresis with two sub-loops. The magnetization at the intermediate state of this hysteresis depends on TEXP with a threshold indicating percolation magnetization reversal in the network of the interfacial grains. The revealed mechanisms of the thermal exposure effects could be helpful in the development of technological processes for definition of magnetic anisotropies in multilayer sensors and memory structures with accurate control of magnetization angles.