Browse Articles
Discover research articles across all indexed journals
Efficient cutting stock optimization strategies for the steel industry
This study addresses a cutting stock problem in steel cutting industry by developing a mathematical model in which machine specifications and cutting conditions are constraints. The solution process involves three key steps: (i) Problem representation, where feasible cutting solutions are modeled based on pre-cut steel bars and customer orders, (ii) Problem space reduction, which reduces the problem space by eliminating suboptimal solutions and following manufacturer loss limits, and (iii) Optimal solution search, whereas the optimal solution is identified using a new Adaptive Pathfinding Optimization Algorithm. This algorithm combines a newly proposed Wandering Ant Colony Optimization with a brute force method, and uses specific conditions to determine which of these two approaches to be used to obtain the solution. The proposed algorithm can also be applied to other cutting stock problems, such as paper roll cutting, metal rod cutting, and wood plank cutting. The algorithm was applied to real customer orders in a steel manufacturer and showed significant benefits by reducing the number of planners from four to merely one person and decreasing the cutting planning time from six hours to under one hour. Additionally, the algorithm yields an average cost saving of USD 3.95 per ton, or 52.18% of the baseline.
Applying the active learning strategy to the construction of full-dimensional neural network potential energy surfaces: Critical tests in H2O–He spectroscopic calculation
An uncertainty-driven active learning strategy was employed to achieve efficient point sampling for full-dimension potential energy surface constructions. Model uncertainty is defined as the weighted square energy difference between two neural network models, and the local maximums of uncertainty would be added to the training set by two criteria. A two-step sampling procedure was introduced to reduce the computational costs of expansive double-precision neural network training. A reference potential energy surface (PES) of the 6-D H2O–He system was constructed first by the MLRNet model with a weighted Root-Mean-Square-Error (RMSE) of 0.028 cm−1. The full-dimension long-range function was fitted by a pruned basis expansion method. The current sampling method is reliable for the long-range switched fundamental invariant neural network (LS-FI-NN) to construct spectroscopically accurate PES, where the single precision model achieves a test set RMSE of 0.3253 cm−1 with 472 fitting points and the double precision model is 0.0710 cm−1 with only 613 points. In comparison, the MLRNet requires 652 points to reach a similar accuracy. However, the MLRNet, with fewer parameters, shows lower training errors across all sampling cycles and lower test errors in the first few cycles, indicating its potential with an appropriate sampling procedure. The spectroscopic calculations were performed to validate the accuracy of PESs. The energy levels of the double precision LS-FI-NN showed great agreement with the reference PES’s results, with only 0.0161 and 0.0044 cm−1 average errors for vibrational levels and the band origin shifts.
Investigating the influence of language teachers’ constructivist self-efficacy on their practice of constructivism in Ghanaian language and culture instruction
The education system in Ghana is undergoing a transition from a behaviorist instructional philosophy to a constructivist one, aiming to produce learners who can actively contribute to nation-building. Nonetheless, given the heavy demands on teachers regarding this abrupt shift into constructivist teaching, there is a need to examine teachers’ sense of efficacy in relation to the enactment of the core principles of this novel instructional philosophy—i.e., social, cognitive, and critical constructivism— laid down in the newly introduced standards-based curriculum. An explanatory sequential mixed method was used to obtain data from basic school teachers in the Sunyani-West Municipal of Bono Region, Ghana. Using adapted teacher self-efficacy and constructivist learning environment scales, quantitative data were gathered from 104 teachers. Qualitative data were also gathered from 15 conveniently sampled language teachers to augment the quantitative findings. Using partial least squares structural equation modelling, a significant positive association was discovered between teachers’ efficacy and the practice of social and cognitive constructivism. Nonetheless, teachers’ efficacy did not statistically predict their practice of critical constructivism. The qualitative results showed that sociocultural concerns probably accounted for the insignificant association between efficacy and critical constructivism. It was therefore concluded that sociocultural norms designed for bringing up a child in Ghana tend to inhibit the enactment of critical constructivism. The study recommends that the National Council for Curriculum and Assessment, in partnership with the Ghana Tertiary Education Commission, should update teacher professional development programs in universities and colleges of education to incorporate constructivist principles, particularly critical pedagogy, aiming to produce competent teachers capable of fostering learners’ autonomy, critical thinking, and problem-solving skills as outlined in the Standards-Based Curriculum (SBC).
Frontal polymerization in thin layers: Hydrodynamic effects and asymptotic dynamics
Buoyancy-driven convection currents arise from temperature gradients in thermal frontal polymerization (FP) when the spatially localized polymerization reaction travels perpendicularly to the gravity field. We propose a theoretical study of the system dynamics under adiabatic conditions. The polymer and the reactant mixture are considered to be in the same liquid phase, but the viscosity can increase with the degree of polymerization. We find that the reaction zone propagates as a hot spot-like pattern with a broken symmetry in both the vertical and horizontal directions. Furthermore, the system can reach an asymptotic dynamics characterized by a front with a steady shape that propagates at constant speed with a steady vortex surrounding it. As the strength of the vortex is increased, either by decreasing the reactants’ viscosity or by increasing the layer’s thickness, we observe a transition between (i) a passive regime predicted by pure reaction–diffusion and hydrodynamic models and (ii) an active chemo-hydrodynamic regime where such models separately break down. In the active regime (ii), the front speed decreases as convection intensifies. By means of a scaling analysis, we explain how hydrodynamic currents might lower the velocity of a polymerization wave. As the viscosity of the polymer is enlarged, the flow is shifted ahead of the reaction zone and becomes more symmetrical with respect to the middle of the system, as recently observed in solid–liquid FP experiments [Y. Gao et al., Phys. Rev. Lett. 130, 028101 (2023) and Y. Gao et al., Int. J. Heat Mass Transf. 240, 126622 (2025)].
Agro-physiological and transcriptome profiling reveal key genes associated with potato tuberization under different nitrogen regimes in aeroponics
Nitrogen (N) is a crucial nutrient for the growth and development of potatoes. However, excessive use of nitrogen fertilizers can have detrimental effects on human health, aquatic ecosystems, and the environment. Therefore, understanding the genes involved in nitrogen metabolism is essential for developing future strategies to improve nitrogen use efficiency (NUE) in plants. This study aimed to identify genes associated with high tuber yield in two contrasting potato varieties Kufri Jyoti (N inefficient) and Kufri Pukhraj (N efficient) grown under low and high nitrogen regimes using an aeroponics system. Both varieties were grown in aeroponics with two nitrogen doses (low N: 0.5 mM N; high N: 5 mM N) using a completely randomized design (CRD) with three replications over two years. The phenotypic results confirmed that Kufri Pukhraj was more nitrogen use efficient compared to Kufri Jyoti, particularly under low nitrogen conditions. Additionally, transcriptome analysis produced high-quality data ( ≥ Q20), ranging from 4.35 to 5.46 Gb per sample. Statistically significant genes (p ≤ 0.05) were identified based on the reference potato genome. Differentially expressed genes (DEGs) were categorized as either up-regulated or down-regulated in leaf and tuber tissues. Transcriptome profiling of both tuber and leaf tissues revealed genes associated with traits contributing to high tuber yield under both high and low nitrogen conditions. The DEGs were further characterized through gene ontology (GO) annotation and KEGG pathway analysis. Selected genes were validated through real-time quantitative polymerase chain reaction (RT-qPCR) analysis. In summary, several genes were identified as being involved in high tuber yield component traits in potatoes under different nitrogen conditions. These included glutaredoxin, transcription factors (BTB/POZ, AP2/ERF, and MYB), nitrate transporter, aquaporin TIP1;3, glutamine synthetase, aminotransferase, GDSL esterase/lipase, sucrose synthase, UDP-glycosyltransferases, osmotin, xyloglucan endotransglucosylase/hydrolase, and laccases. Additionally, we identified overexpressed genes including cysteine protease inhibitor 1, miraculin, sterol desaturase, and pectinesterase in Kufri Pukhraj under low N stress. Our study highlights these genes’ roles in enhancing tuber yield in potatoes cultivated under both high and low nitrogen in aeroponics.
A deep learning approach for high-resolution and enhanced efficiency in photonic power dividers
With recent developments, nanophotonics has emerged as a field of intense interest offering improvements in the performance of photonic integrated circuits (PICs). By significantly increasing data rates, transmission speed, and bandwidth and reducing both transmission loss and energy consumption, nanophotonic technologies present significant advantages that could redefine the efficiency and capabilities of PICs. In this study, the design of photonic crystal power dividers is addressed using a two-stage deep learning strategy with Deep Convolutional Generative Adversarial Networks (DCGANs). The study primarily aims for high-resolution designs compared to the existing methods. This approach expands the solution set, allowing for simulation results that more closely align with real-world performance while achieving higher transmission efficiency and output rates within practical computational limits. Previous studies were limited by low-resolution designs and the necessity for extensive optimization processes. Using the DCGAN architecture, high-resolution patterns (200 × 200 pixels) with transmission efficiencies exceeding 95% are achieved. This approach highlights the effectiveness of deep learning in discovering complex nonlinear relationships, successfully producing power dividers capable of arbitrary energy distributions. The innovative method positions the role of deep learning in advancing photonic devices and emphasizes their potential impact on neurocomputing and future hardware development.
Are nanocubes more efficient than nanospheres to enhance the nuclear magnetic relaxation of water protons? A Monte Carlo simulation study
Iron oxide superparamagnetic nanoparticles have been extensively studied as T2 contrast agents in magnetic resonance imaging. The theory of nuclear magnetic relaxation induced by superparamagnetic nanoparticles has been validated by numerous experimental studies in the case of spherical particles. Recently, several studies focused on the synthesis of cubic nanoparticles. Some of them reported significantly higher relaxivities compared to their spherical counterpart and attributed this increase to their specific shapes. This work investigates the impact of cube-shaped nanoparticles on nuclear magnetic relaxation through Monte Carlo methods. Transverse relaxation at high static magnetic field is simulated by modeling the proton diffusion in the magnetic field generated by a cubic or a spherical nanoparticle. The results indicate that, in the case of magnetite nanoparticles, there is no significant difference between both shapes for sizes above 30 nm when particles are compared at equal volumes and magnetization. Below this size, a −40%–15% variation of the relaxation rates is predicted for the cubic case compared to the spherical case. These results are explained using general relaxation models that incorporate the distribution of the magnetic field generated by the nanoparticles. The simulation predictions are compared to some experimental results from the literature, revealing that, in some cases, the magnetic field specific to the nanoparticle shape alone cannot explain the observed increase in the relaxation rate of cubic nanoparticles.
Association between Body Roundness Index and Depression Among Middle-aged and Older Adults in Chinese Communities: An Empirical Analysis Based on CHARLS Data
Background The relationship between depression and obesity has been confirmed by multiple studies. Compared to conventional measurement indicators such as body mass index or waist circumference, the body roundness index (BRI) demonstrates higher accuracy in assessing body fat content, especially visceral adiposity. Nevertheless, despite the advantages of BRI in measuring fat, the specific link between BRI and depression remains unclear. This study aims to clarify the potential correlation using data from the China Health and Retirement Longitudinal Study (CHARLS). Methods This study used CHARLS data from 2015 and 2020. We screened and included 7,258 middle-aged and older adults without depressive symptoms at baseline. We explored the connection between BRI and depression risk through logistic regression analyses, restricted cubic spline analyses, subgroup analyses, and interaction tests Results After adjusting for covariates, a positive correlation was observed between BRI and depression risk. Specifically, a one-unit increase in BRI led to a 14% increase in depression risk (OR = 1.14, 95% CI: 1.09-1.20, P < 0.001). Conclusion BRI is linked to a higher risk of depression in middle-aged and older adults in China and can be used as a simple indicator to predict depression.
Comparison of NiFeCr and NiFe in ferromagnetic Josephson junctions
Josephson junctions containing ferromagnetic materials are under consideration for applications in digital superconducting logic and memory. Some memory applications rely on the ability to reverse the magnetization direction of a “soft” magnetic layer within the junction using a small local magnetic field generated on the chip. It is crucial, therefore, to find a suitable soft magnetic material with a low switching field and low switching energy. A popular magnetic material for such applications is Ni80Fe20, also known as Permalloy; however, Permalloy has a rather large magnetization, leading to large magnetic switching energies. In this work, we explore Cr-doped Permalloy, specifically Ni73Fe18Cr9, which has a saturation magnetization just under two-thirds that of Permalloy. Josephson junctions containing this NiFeCr alloy undergo a 0-π transition at a NiFeCr thickness of 2.3 nm, and the critical supercurrent decays in the alloy over a short characteristic length of 0.36 nm. Switching fields of a few millitesla are promising, but the short decay length and overall small values of the critical current in the Josephson junctions may preclude the use of NiFeCr in current cryogenic memory technologies.
Disentangling signal contributions in two-dimensional electronic spectroscopy in the pump–probe geometry
Since its introduction almost three decades ago, two-dimensional electronic spectroscopy (2DES) has evolved into a mature and powerful technique to reveal the inner workings of quantum systems with high temporal and spectral resolution. In general, this technique can isolate different contributions to the nonlinear response and provides access to different dynamical quantum pathways of the system evolution. Such isolation of pathways can be achieved in different experimental geometries. In its original, fully noncollinear implementation, directional phase matching allows for such signal isolation, while in the modern commonly employed pump–probe geometry, experimentally challenging phase-cycling schemes are employed. Here, we show how rephasing, non-rephasing, and zero- and double-quantum 2DES signals can be isolated in the pump–probe geometry without a need for phase-cycling. For this, we utilize established causality restrictions of the nonlinear response, allowing us to separate the different contributions in the spectral domain. We demonstrate this using data recorded for a molecular J-aggregate, acting as an effective three-level system. This approach bridges the gap between the capabilities of shaper-based and fully noncollinear 2DES and experimentally simpler implementations, such as those based on birefringent common-path interferometers.
Correction: Substance use and disordered eating risk among college students with obsessive-compulsive conditions
Dual-drive DC magnetic sensor based on converse magnetoelectric coupling effect
This study presents an innovative design for a direct current (DC) magnetic sensor that leverages the converse magnetoelectric (ME) coupling effect along with a novel dual ME coupling structure to significantly enhance sensitivity in DC magnetic field detection. A sensitivity model was developed, and the impact of array quantity on both sensitivity and the signal-to-noise ratio (SNR) was analyzed. Comprehensive theoretical analysis and experimental validation were conducted to evaluate the SNR performance of the array structure. The design incorporates periodic magnetic flux changes induced in two Metglas-PZT8-Metglas ME coupling structures by the investigated magnetic field. These changes are detected by a pickup coil, which generates the measurement output. The dual-drive configuration substantially increases signal strength and facilitates precise magnetic field measurements without altering the external magnetic field distribution. By modulating the drive voltage, the sensor's sensitivity is linearly adjustable, thereby mitigating nonlinearity. Furthermore, by examining the phase-frequency characteristics of the output signal, the sensor's capability to determine the direction of the magnetic field was confirmed. This sensor offers low cost, high sensitivity (10.51 mV/μT), low detection limits (1 nT), and a broad dynamic range (1 nT to 300 μT), making it suitable for precise measurements of geomagnetic field strength and direction. This development represents a cost-effective approach to producing compact, efficient DC magnetometers.
On the spectral shape of the structural relaxation in supercooled liquids
Structural relaxation in supercooled liquids is non-exponential. In susceptibility representation, χ″(ν), the spectral shape of the structural relaxation is observed as an asymmetrically broadened peak with a ν1 low- and ν−β high-frequency behavior. In this perspective article, we discuss common notions, recent results, and open questions regarding the spectral shape of the structural relaxation. In particular, we focus on the observation that a high-frequency behavior of ν−1/2 appears to be a generic feature in a broad range of supercooled liquids. Moreover, we review extensive evidence that contributions from orientational cross-correlations can lead to deviations from the generic spectral shape in certain substances, in particular in dielectric loss spectra. In addition, intramolecular dynamics can contribute significantly to the spectral shape in substances containing more complex and flexible molecules. Finally, we discuss the open questions regarding potential physical origins of the generic ν−1/2 behavior and the evolution of the spectral shape toward higher temperatures.
Electric vehicle braking energy recovery control method integrating fuzzy control and improved firefly algorithm
Braking energy recovery is crucial for improving the energy efficiency and extending the range of electric vehicles. If a large amount of braking energy is wasted, it will lead to problems such as reduced range and increased battery burden for electric vehicles. Therefore, an electric vehicle braking energy recovery control model that integrates fuzzy control algorithm with genetic firefly algorithm is proposed. Experimental analysis showed that the decrease in the state of charge of the model was 12.44%, and the braking energy recovery rate reached 52.1% in practical applications. Based on the above data, the proposed method can effectively control the amount of energy recovery. In addition, when the system chip value was 10%, the total amount of recovered energy at the battery end was the highest. Conversely, the total amount of recovered energy at the battery end was relatively small. In summary, the designed electric vehicle braking energy recovery control model can effectively control the amount of braking energy recovery of electric vehicles, ensuring the maximum recovery while also considering the durability and driving stability of the vehicle battery. The method can effectively extend mileage range in the electric vehicle industry, promoting the development and technological innovation of the new energy industry.
Optothermal Raman analysis of thermal conductance and boundary resistance in a subwavelength single nanoparticle
We present optothermal Raman spectroscopy as a powerful technique for characterizing the thermal properties of individual subwavelength nanoparticles. This method enables the extraction of the intrinsic thermal conductance of an individual nanoparticle with an average size representative of the inclusion population and the thermal resistance at the interface between the nanoparticle and its surrounding matrix. By overcoming the spatial resolution limitations of conventional techniques, such as scanning thermal microscopy, and eliminating the need for complex nanoscale heat transfer modeling, optothermal Raman spectroscopy provides direct, size-independent measurements with high accuracy. The technique involves measuring the thermal conductance of target nanoparticles embedded in a matrix of smaller, low-density particles at varying mass fractions. These measurements are then fitted to the effective medium theory to extract both the intrinsic thermal conductance and boundary thermal resistance of the nanoparticles. Validation studies were conducted on monoclinic gallium oxide (β-Ga₂O₃, 590 nm) and zinc oxide (ZnO, 500 nm) particles in a granular silicon matrix, as well as silicon (Si, 100 nm) nanoparticles in a granular carbon matrix. The β-Ga₂O₃ and ZnO particles, with bulk-like thermal properties, served as benchmarks, while the Si nanoparticles exhibited size-dependent thermal behavior. Measurements relied on the resonance frequency of Si as a precise thermometric signal, and results were corroborated by first-principles calculations. By providing direct, reliable measurements without intricate modeling, optothermal Raman spectroscopy offers significant advantages for thermal property characterization. This versatile technique holds great promise for advancing research in materials science and nanotechnology.
Triplet pair dynamics of singlet fission in orthorhombic polycrystalline powder of rubrene as revealed by magnetoluminescence
Singlet fission, which may increase the energy conversion efficiency of solar cells, proceeds via multiple spin levels of a triplet pair. To clarify the spin-related elementary processes of the triplet pair, we measured the magnetoluminescence effect of the fluorescence of rubrene, in the form of orthorhombic polycrystalline powder, in the range of ±300 mT at room temperature. Model simulations using the density matrix method were performed to elucidate how the features of the magnetoluminescence effect depend on the triplet pair dynamics. Simulations of the observed field dependence of the magnetoluminescence effect revealed an anisotropy of 1:100 for the two-dimensional hopping of triplet excitons forming a triplet pair in the ab plane, for which the exchange interaction depends on the separation distance between the two triplet excitons. The effective lifetime of the spin-correlated triplet pair responsible for the magnetoluminescence effect is estimated to be 2.2 ns.
DMCM: Dwo-branch multilevel feature fusion with cross-attention mechanism for infrared and visible image fusion
In response to the limitations of current infrared and visible light image fusion algorithms—namely insufficient feature extraction, loss of detailed texture information, underutilization of differential and shared information, and the high number of model parameters—this paper proposes a novel multi-scale infrared and visible image fusion method with two-branch feature interaction. The proposed method introduces a lightweight multi-scale group convolution, based on GS convolution, which enhances multi-scale information interaction while reducing network parameters by incorporating group convolution and stacking multiple small convolutional kernels. Furthermore, the multi-level attention module is improved by integrating edge-enhanced branches and depthwise separable convolutions to preserve detailed texture information. Additionally, a lightweight cross-attention fusion module is introduced, optimizing the use of differential and shared features while minimizing computational complexity. Lastly, the efficiency of local attention is enhanced by adding a multi-dimensional fusion branch, which bolsters the interaction of information across multiple dimensions and facilitates comprehensive spatial information extraction from multimodal images. The proposed algorithm, along with seven others, was tested extensively on public datasets such as TNO and Roadscene. The experimental results demonstrate that the proposed method outperforms other algorithms in both subjective and objective evaluation results. Additionally, it demonstrates good performance in terms of operational efficiency. Moreover, target detection performance experiments conducted on the M3FD dataset confirm the superior performance of the proposed algorithm.
Strain evolution in La0.6Sr0.4CoO3−<i>δ</i> and SrTi0.3Fe0.7O3−<i>δ</i> multilayer systems
In this work, we investigated La0.6Sr0.4CoO3−δ / SrTi0.3Fe0.7O3−δ multilayer systems with different layer thicknesses. Reciprocal space mapping showed splitting of the reflections in the sample with 5 nm layers while for 15 nm thick layers reflections have been elongated. Using transmission electron microscopy, we investigated this phenomenon at the atomic scale and showed that the alternating 15 nm layers gradually increase their tensile out-of-plane strain, whereas the sample with 5 nm layers maintains a relatively stable strain state. In-plane strain relaxation is similar in both samples. Still, it differs in the strain relaxation mechanism, which involves the formation of amorphous regions in the 5 nm sample and the formation of edge dislocations in the 15 nm sample. Electron energy loss spectroscopy was employed to probe the oxidation states of Co, Fe, and Ti. In both samples, the oxygen vacancy concentration increases toward the surface.
Dimerization of model polymer chains under nonequilibrium conditions
Dimerization and subsequent aggregation of polymers and biopolymers often occur under nonequilibrium conditions. When the initial state of the polymer is not collapsed, or the final folded native state, the dynamics of dimerization can follow a course sensitive to both the initial conditions and the conformational dynamics. Here, we study the dimerization process by using computer simulations and analytical theory, where the two monomeric polymer chains are in the elongated state and are initially placed at a separation distance, d0. Subsequent dynamics lead to the concurrent processes of collapse, dimerization, and/or escape. We employ Langevin dynamics simulations with a coarse-grained model of the polymer to capture certain aspects of the dimerization process. At separations d0 much shorter than the length of the monomeric polymer, the dimerization could happen fast and irreversibly from the partly extended polymer state itself. At an initial separation larger than a critical distance, dc, the polymer collapse precedes dimerization, and a significant number of single polymers do not dimerize within the time scale of simulations. To quantify these competitions, we introduce several time-dependent order parameters, namely, (i) the time-dependent radius of gyration RG(t) of individual polymers describing the conformational state of the polymer, (ii) a center-to-center of mass distance parameter RMM, and (iii) a time dependent overlap function Q(t) between the two monomeric polymers, mimicking the contact order parameter popular in protein folding. In order to better quantify the findings, we perform a theoretical analysis to capture the stochastic processes of collapse and dimerization by using the dynamical disorder model.
Frequency, predictors and outcomes of intradialytic complications in patients on maintenance haemodialysis in Dar es Salaam: Prospective longitudinal study
Introduction Hemodialysis is a crucial renal replacement therapy option for end stage renal disease (ESRD) patients. Currently, there is a rise of patients who require hemodialysis with concurrent rise in intradialytic complications which can potentiate several outcomes some of which are life threatening. This study assessed the frequency, predictors, and outcomes of intradialytic complications amongst ESRD patients on maintenance hemodialysis. Methodology Prospective longitudinal study using self-designed questionnaires including patient’s demographic data and relevant past medical history, pre-hemodialysis assessment and intra-dialysis monitoring was done for 2 months at Aga Khan Hospital and Muhimbili National Hospital, in Dar es salaam, Tanzania. Results 215 patients were enrolled, of which 138(64.2%) were males with mean age 57(SD 15.37), height 1.64(SD 0.08) and weight 69.27(SD 12.62). Most patients 197(91.6%), were on thrice weekly schedule of which the duration of each session in most patients 206(95.8%) was 4 hours. Diabetes mellitus was the most common etiology of ESRD 126 (58.6%), ArterioVenous fistula (AVF) was the most common vascular access for the procedure 90(41.9%) and mostly, high flux dialyzers were used, FX100 & FX80, (211, 98.2%). There was a statistically significant association between pre-dialysis vital signs, blood flow rate and sex (p value < 0.05) with intradialytic hypertension and hypotension. Interestingly, male sex appeared to elicit a protective effect on intradialytic hypotension (p value < 0.001). Conclusion Hemodialysis is a life-saving procedure with multiple complications of which some have detrimental outcomes. Nonetheless, having a good understanding of the factors associated with the complications, appropriate management and ways of preventing them will remarkably improve the procedure and make it a safer renal replacement modality. Carefully, monitoring pre-dialysis vitals and taking necessary measures when deranged, individualized proper machine settings, sufficient fluid removal and standard blood flow rate may improve the dialysis procedure.