Browse Articles
Discover research articles across all indexed journals
Functional dynamics of G protein-coupled receptors reveal new routes for drug discovery
Rapid Drying Principle for High‐speed, Pinhole‐Less, Uniform Wet Deposition Protocols of Water‐Dispersed 2D Materials (Adv. Mater. 15/2025)
Multifunctional Terahertz Biodetection Enabled by Resonant Metasurfaces
Abstract Testing diverse biomolecules and observing their dynamic interaction in complex biological systems in a label‐free manner is critically important for terahertz (THz) absorption spectroscopy. However, traditionally employed micro/nanophotonic techniques suffer from a narrow operating resonance and strong absorption band interference from polar solutions preventing seriously reliable, on‐demand biosensor integration. Here, a multifunctional THz plasmonic biosensing platform by leveraging multiple interfering resonances from quasi‐bound states in the continuum designed to noninvasively and in situ track the temporal evolution of molecules in multiple analyte systems, is proposed. In contrast to conventional microphotonic sensors, this platform demonstrates substantially broadband performance and reduced footprints, allowing for simultaneous detection of diverse molecular vibrant at multiple spectral points through robust near‐field interactions. Furthermore, this sensor enables real‐time analysis of amino acid absorption as water evaporates despite its strong overlapping absorption bands in the THz range. By utilizing the real‐time format of the reflectance method to acquire a comprehensive spectro‐temporal data collection, this approach supports developing a deep neural network to discriminate and predict the composition and proportion of multiple mixtures, obviating the need for frequency scanning or microfluidic devices. This approach offers innovative viewpoints for exploring biological processes and provides valuable tools for biological analysis.
Advances and Outlooks for Carbon Nanotube‐Based Thermoelectric Materials and Devices
Abstract The unique structure of carbon nanotubes (CNTs) endows them with exceptional electrical and mechanical properties, along with a high surface area, making them highly beneficial for use as flexible, high‐performing thermoelectric materials. As a result, the application of CNTs in the thermoelectric field has become increasingly widespread. Considering the rapid advancements in this field, this review offers a timely overview of the most recent progress on CNT‐based thermoelectric materials and devices over the past five years. This review begins by introducing the fundamental concepts and thermoelectric mechanisms of CNT‐based thermoelectric materials. Then new strategies are explored to enhance their thermoelectric performance, focusing on doping and composites, while emphasizing the importance of CNT stability as a key research area. Additionally, the latest design concepts and expanded application scenarios for flexible and wearable CNTs‐based thermoelectric devices are summarized. Finally, the current challenges are addressed and future directions for the development of CNT‐based thermoelectric materials and devices are discussed.
Distinct neuronal vulnerability and metabolic dysfunctions are characteristic features of fast-progressing Alzheimer's patients with Lewy bodies
The three dimensional model of extended defects in β-Ga2O3 homoepitaxial film
In this paper, a three dimensional (3D) model was built to elucidate the formation mechanism of the dislocation line, the surface morphology evolution with changing of the cutting angle, and the shape of etched pits after the chemical-mechanical polishing (CMP) process of a (001) homoepitaxial film. The dislocation line of an angle at approximately 60° with respect to the (001) plane observed from the [100] direction originates from the intersection line between the principal (100) plane of the nanopipe and the (11-1) plane in the quasi-tetrahedron region of the (010) plane surface. The surface morphology transition from a groove to a triangular pit is related to inheriting the cutting shape of nanopipes on the (001) surface. The appearance of chevron-shaped etching pits on CMP processed (001) homoepitaxial film can be explained by exposing two lateral (111) and (1-11) facets as sidewall, with the (100) facet remaining as the central core in the defect position after anisotropic wet etching. The 3D model also provides the possibility to explain the different angles and the Burgers vector of dislocation lines in single-crystal substrates, which is due to diverse sidewall planes of the nanopipe intersection with the planes in the quasi-tetrahedron region of the (010) plane.
COVID-19 and neuropathy in type 2 diabetes
Abstract This study investigated the risk factors for COVID-19 and its impact on diabetic peripheral neuropathy (DPN) in patients with type 2 diabetes (T2D). Patients with T2D underwent assessments with the NICE post-COVID questionnaire, DN4 questionnaire, vibration perception threshold (VPT), and corneal confocal microscopy (CCM) before and 11.0 ± 8.9 months after developing COVID-19. Of 76 participants with T2D, 35 (46.1%) developed COVID-19, of whom 8 (22.9%) developed severe COVID-19 and 9 (25.7%) developed long-COVID. The development of COVID-19 was associated with lower systolic blood pressure (P < 0.05). The presence and severity of DPN were not associated with developing COVID-19, severe COVID-19, or long-COVID (P = 0.42–0.94). Women were eight times more likely to develop long-COVID (P < 0.05) and elevated body weight, LDL, and VPT were associated with the development of long-COVID (P < 0.05 − 0.01). The long-COVID group exhibited significant changes in triglycerides and LDL (P < 0.05 for both) and body weight (P < 0.01) at follow-up. Their impact on clinical and neuropathy measures was comparable in patients with and without COVID-19 (P = 0.08–0.99). There was a significant reduction in corneal nerve measures (P < 0.05-0.0001) in patients with and without COVID-19. A low systolic blood pressure, altered lipids, body weight, higher VPT, and gender may determine the impact of COVID-19 in patients with T2D, but there was no evidence of an impact of COVID-19 on the development or progression of DPN.
Buckle‐Barrel Correspondence Based on Topological Polarization Conversion in Mechanical Metamaterials (Adv. Mater. 15/2025)
Anomalous Nonlinear Magnetoconductivity in van der Waals Magnet CrSBr
AbstractNonlinear magnetoconductivity (NLMC) is a nonreciprocal transport response arising in non‐centrosymmetric materials. However, this ordinary NLMC signal vanishes at zero magnetic field, limiting its potential for applications. Here, the observation of an anomalous NLMC controlled by internal order parameters such as the magnetization or Néel vectors is reported. This response is achieved by breaking both inversion and time‐reversal symmetry in artificial van der Waals heterostructures based on the magnetic CrSBr and insulating hBN. The nonreciprocal signal can be tuned between two different states in ferromagnetic monolayer CrSBr and among four different states in antiferromagnetic bilayer CrSBr, thanks to its metamagnetic transition. Remarkably, this output signal in the ferromagnetic (antiferromagnetic) state of CrSBr is three (one) orders of magnitude higher than those previously measured. A conductivity scaling analysis reveals the Berry connection polarizability as the origin of the anomalous NLMC. The results pave the way for high‐frequency rectifiers with magnetically switchable output polarity as well as for an efficient electrical readout of the magnetic state of antiferromagnetic materials.
Bio‐Inspired, Miniaturized Magnetic Heart Valve System for Superior Performance Cardiovascular Simulator
AbstractThe demand for accurate vascular simulators is increasing to facilitate effective clinical studies on cardiovascular diseases. The research presents the miniaturized design and precise programable regulation of an artificial magnetic heart valve inspired by the human aortic valve, demonstrating the diverse types of pulsating waves. The heart valve is constructed using an elastomeric silicone composite embedded with neodymium magnetic micro‐particles. This valve system responds rapidly to changes in magnetic fields controlled by miniaturized electromagnets, enabling precise regulation of fluid pressure and flow rate. This allows for the generation of various pressure waveforms and accurately replicates diverse blood pressure changes with a compact design. The design, working mechanism, fabrication process, and optimization of the magnetically controlled biomimetic heart valve are discussed and its performance as a cardiovascular simulator for human and animal models is evaluated. This artificial valve system has the potential to be utilized in humanoid robots to generate heart‐like pressure, thereby paving the way for replicating human physiological characteristics. This research promises significant advancements in cardiovascular clinical trials and biomedical research along with the development of humanoid robots and biomimetic mechanical systems.
Ultrahigh Specific Strength by Bayesian Optimization of Carbon Nanolattices
AbstractNanoarchitected materials are at the frontier of metamaterial design and have set the benchmark for mechanical performance in several contemporary applications. However, traditional nanoarchitected designs with conventional topologies exhibit poor stress distributions and induce premature nodal failure. Here, using multi‐objective Bayesian optimization and two‐photon polymerization, optimized carbon nanolattices with an exceptional specific strength of 2.03 MPa m3 kg−1 at low densities <215 kg m−3 are created. Generative design optimization provides experimental improvements in strength and Young's modulus by as much as 118% and 68%, respectively, at equivalent densities with entirely different lattice failure responses. Additionally, the reduction of nanolattice strut diameters to 300 nm produces a unique high‐strength carbon with a pyrolysis‐induced atomic gradient of 94% sp2 aromatic carbon and low oxygen impurities. Using multi‐focus multi‐photon polymerization, a millimeter‐scalable metamaterial consisting of 18.75 million lattice cells with nanometer dimensions is demonstrated. Combining Bayesian optimized designs and nanoarchitected pyrolyzed carbon, the optimal nanostructures exhibit the strength of carbon steel at the density of Styrofoam offering unparalleled capabilities in light‐weighting, fuel reduction, and contemporary design applications.
Resveratrol reduces RVLM neuron activity via activating the AMPK/Sirt3 pathway in stress-induced hypertension
Excellent magnetostrictive properties via tuning the crystal structure and grain size
Magnetostrictive materials are of significant interest due to their potential applications in sensors, actuators, and energy converters. For magnetostrictive materials, different preparation processes are crucial to the quality of their magnetostrictive effect. In this work, Ni50Mn27Ga23 alloys in as-cast, directionally solidified, and melt-spun states were synthesized, and their structural, magnetic, and magnetostrictive properties were investigated. The results reveal that grain size and growth orientation are strongly influenced by the preparation method. Smaller grain sizes and increased grain boundaries hinder domain reorientation under external fields, leading to reduced magnetostriction and higher saturation fields. Growth orientation also affects saturation, further impacting both magnetic and magnetostrictive properties. This work provides valuable insights into the structure–magnetostriction relationship, offering guidance for developing excellent magnetostrictive materials.
Error control method using crossed axes strategy in the five-axis thread milling process
Achieving Zero Leakage, Ultralong Lifespan, and Intrinsic Opening Sensing in Microvalves Through Structural Superlubrication and Triboelectric Nanogenerator Technologies
Abstract Valves are critical components in advanced fluid control systems (AFCS) and play a vital role in applications such as soft robotics and medical devices. Traditional mechanical valves often suffer from issues such as leakage and wear, which compromise the efficiency and precision of air‐driven systems. Here, a superlubricity microvalve (SLMV) is developed with characteristics of zero leakage, ultralong lifespan, and self‐sensing capabilities. The SLMV demonstrates zero helium leakage at pressures exceeding 0.9 MPa, and remains defect‐free after one million collision tests and 5000 reciprocating sliding friction tests. Additionally, the valve features self‐powered sensing that can detect its own open status, and thus enhances the self‐feedback control. AFCS equipped with SLMVs may significantly improve the flexibility and functionality of pneumatic robots, facilitating the development of implantable drug delivery devices that are more durable, compact, safe, and reliable.
A PD‐L1 siRNA‐Loaded Boron Nanoparticle for Targeted Cancer Radiotherapy and Immunotherapy
Abstract Although the combination of radiotherapy and immunotherapy is regarded as a promising clinical treatment strategy, numerous clinical trials have failed to demonstrate synergistic effects. One of the key reasons is that conventional radiotherapies inevitably damage intratumoral effector immune cells. Boron Neutron Capture Therapy (BNCT) is a precise radiotherapy that selectively kills tumor cells while sparing adjacent normal cells, by utilizing 10 B agents and neutron irradiation. Therefore, combinational BNCT‐immunotherapy holds promise for achieving more effective synergistic effects. Here it develops a 10 B‐containing polymer that self‐assembled with PD‐L1 siRNA to form 10 B/siPD‐L1 nanoparticles for combinational BNCT‐immunotherapy. Unlike antibodies, PD‐L1 siRNA can inhibit intracellular PD‐L1 upregulated by BNCT, activating T‐cell immunity while also suppressing DNA repair. This can enhance BNCT‐induced DNA damage, promoting immunogenic cell death (ICD) and further amplifying the antitumor immune effect. The results demonstrated that BNCT using 10 B/siPD‐L1 nanoparticles precisely killed tumor cells while sparing adjacent T cells and induced a potent antitumor immune response, inhibiting distal and metastatic tumors.
Viperin expression leads to downregulation of mitochondrial genes through misincorporation of ddhCTP by mitochondrial RNA polymerase
Unveiling the role of temperature in sign reversal of anomalous Hall resistivity in epitaxial Pt(3 nm)/Fe4N(≤6 nm)/MgO heterostructures toward spintronic devices
The interested anomalous Hall effect (AHE) that occurs in heavy nonmagnetic metal/ferromagnetic metal systems holds immense promise for AHE-based spintronic devices design. However, the mechanisms are still under debate due to the complicated interfacial spin–orbit coupling (SOC) effects. Here, the electronic transport properties of Pt (tPt ≤ 6 nm)/Fe4N (tFe4N ≤ 6 nm)/MgO(sub.) heterostructures were investigated. The sign reversal of Hall resistivity ρxy occurs in ultrathin Pt/Fe4N bilayers. The dependence between AHE resistivity ρAH and temperature T changes from ρAH∝T to ρAH∝−T with decreasing Fe4N thickness from 6 to 3 nm in Pt(3 nm)/Fe4N(t nm) (t =6, 5, 4, and 3). Meanwhile, a critical transition temperature Tc appears in Pt (3 nm)/Fe4N (t ≤ 5 nm). The changes from ρxy∝T to ρxy∝−T and the appearance of Tc can be ascribed to the contributions to AHE from the magnetic proximity effect (MPE) and inverse spin Hall effect (ISHE). ρxy induced by MPE increases with increasing temperature, while ρxy caused by ISHE decreases with increasing temperature in Pt (3 nm)/Fe4N (t ≤ 6 nm). Our work demonstrates that the effects of interfacial SOC on AHE unveil the role of temperature in the sign reversal of ρxy, which provides a tunable platform for the development of AHE-based spintronic devices by enabling reversible control of Hall response through thermal modulation.
Genetic editing of primary human dorsal root ganglion neurons using CRISPR-Cas9
Machine‐Learning‐Enhanced Trial‐and‐Error for Efficient Optimization of Rubber Composites
Abstract The traditional trial‐and‐error approach, although effective, is inefficient for optimizing rubber composites. The latest developments in machine learning (ML)‐assisted methodologies are also not suitable for predicting and optimizing rubber composite properties. This is due to the dependency of the properties on processing conditions, which prevents the alignment of data collected from different sources. In this work, a novel workflow called the ML‐enhanced trial‐and‐error approach is proposed. This approach integrates orthogonal experimental design with symbolic regression (SR) to effectively extract empirical principles. This combination enables the optimization process to retain the characteristics of the traditional trial‐and‐error approach while significantly improving efficiency and capability. Using rubber composites as the model system, the ML‐enhanced trial‐and‐error approach effectively extracts empirical principles encapsulated by high‐frequency terms in the SR‐derived mathematical formulas, offering clear guidance for material property optimization. An online platform has been developed that allows for no‐code usage of the proposed methodology, designed to seamlessly integrate into the existing experimental optimization process.