Browse Articles

Discover research articles across all indexed journals

Binding mode between peptidyl-tRNA hydrolase and the peptidyl-A76 moiety of the substrate

Journal of Biological Chemistry Yuji Uehara, Ami Matsumoto, Tomonori Nakazawa et al. Apr 01, 2025 DOI: 10.1016/j.jbc.2025.108385

High carrier mobility of diamond (100) enabled by surface modification using doped hexagonal boron nitride

Applied Physics Letters Zhihao Li, Le Chen, Caiyun Liu et al. Apr 01, 2025 DOI: 10.1063/5.0259636

Diamond with high carrier mobility is desirable for the next generation electronic devices for high-speed, high-power, and radio frequency applications, which, however, is difficult to achieve due to the trapped charges at the dielectric/diamond interface. Here, we report the improved carrier mobility of diamond(100) enabled by surface modification with two-dimensional doped hexagonal boron nitride (h-BN). The energetically optimized structures of diamond(100)/h-BN heterojunctions doped with Mg or Si at different atomic layer positions are studied through first principles calculations. The interaction between impurity atoms in h-BN to the diamond surface is particularly investigated according to the doping position. Surprisingly, when Mg doping at the interfacial layer of h-BN/diamond, specifically in the second h-BN layer from the interface, a considerably high hole mobility (∼2645 cm2/Vs) is achieved, in strong contrast to the same doping with Si. The mechanism of interfacial doping enhancement in hole mobility is specially studied. The results of this work provide potential routes for developing high mobility diamond-based electronic devices through surface modifications via h-BN.

Comparative analysis of ensemble learning techniques for enhanced fatigue life prediction

Scientific Reports Sasan Farhadi, Samuele Tatullo, Francesco Ferrian Apr 01, 2025 DOI: 10.1038/s41598-024-79476-y

Correction to “Construction of Ultrastable Ultrathin Black Phosphorus Nanodisks Hybridized with Fe <sub>3</sub> O <sub>4</sub> Nanoclusters and Iron (V)‐Oxo Complex for Efficient Potassium Storage”

Advanced Materials Y. Xiao, F. Liu, H. Shi et al. Apr 01, 2025 DOI: 10.1002/adma.202502942

A high-throughput assay platform to discover small molecule activators of the phospholipase PLC-γ2 to treat Alzheimer's disease

Journal of Biological Chemistry Adam J. Carr, Nicole Hajicek, Andy P. Tsai et al. Apr 01, 2025 DOI: 10.1016/j.jbc.2025.108356

Quasi-<i>in situ</i> redeposition-enabled stabilization of NiFe-based (oxy)hydroxides under high OER current density

Applied Physics Letters Meng-Yuan Xie, Jia-Rong Huang, Hui Wan et al. Apr 01, 2025 DOI: 10.1063/5.0261319

NiFe-based (oxy)hydroxides are promising oxygen evolution reaction (OER) catalysts but suffer from severe Fe dissolution under operational conditions, rapidly resulting in a significant drop in activity. Here, we report a quasi-in situ redeposition strategy enabled by Ce doping to realize rapid capture and deposition of Fe species on the surface of NiFeOOH. During the OER process, dissolved Ce ions, owing to their large ionic radius and strong electrostatic attraction, enhance OH− concentration at the solid–liquid interface, accelerating Fe redeposition and suppressing Fe leaching into the electrolyte. This significantly enhances activity and durability under high-current density. The optimized Ce-NiFeOOH catalyst delivers an overpotential of 294 mV at 1000 mA cm−2 and maintains excellent stability at 500 mA cm−2. This strategy offers a feasible direction to design highly stable transition-metal-based (oxy)hydroxides for the OER.

GA BP prediction model for energy consumption of steel rolling reheating furnace

Scientific Reports Yi Duan, Guang Chen, Xiangjun Bao et al. Apr 01, 2025 DOI: 10.1038/s41598-025-95134-3

Bio‐Inspired, Miniaturized Magnetic Heart Valve System for Superior Performance Cardiovascular Simulator (Adv. Mater. 16/2025)

Advanced Materials Jeongmin Yoo, Gooyoon Chung, Yoonseok Park Apr 01, 2025 DOI: 10.1002/adma.202570124

Programmable Non‐Volatile Photonic Analog‐to‐Digital Converter Based on Back‐End‐of‐Line Compatible Phase‐Change Materials

Advanced Materials GaoFei Wang, Jiabin Shen, Yaping He et al. Apr 01, 2025 DOI: 10.1002/adma.202419444

AbstractHigh‐performance signal processing and telecommunication systems absolutely necessitate analog‐to‐digital converters (ADCs) that offer extensive bandwidth, exceptional precision, and minimal power consumption, in order to efficiently convert real‐world analog signals into digital signals. While current electronic ADCs are constrained by limitations such as low bandwidth, high jitter noise, susceptibility to electromagnetic interference, and excessive energy consumption, photonic ADCs present promising solutions to overcome these challenges. Here, a programmable photonic ADC is developed by integrating phase‐change materials (PCMs) with silicon photonics fabricated using foundry processes. Thanks to the programmability and non‐volatile nature of PCMs, 2‐ and 4‐bit photonic ADCs are demonstrated on a single chip, achieving zero energy consumption during the quantization. Through the experimental demonstration of 65‐state PCMs, photonic ADCs can attain a resolution of 8‐bit, marking a significant milestone as the highest resolution reported to date for ADCs leveraging optical technologies. As a proof of concept, an all‐optical analog‐to‐digital conversion system is demonstrated by integrating 2‐bit photonic ADCs with optical sampling using a mode‐locked laser (MLL). This system achieves the conversion of a 321 MHz radio frequency (RF) signal at a sampling rate of 40 MS s−1. The programmable, energy‐efficient, and high‐speed photonic ADCs represent a significant advancement in the evolution of signal processing systems.

Characterization of quinazolinone calcilytic therapy for autosomal dominant hypocalcemia type 1 (ADH1)

Journal of Biological Chemistry Fadil M. Hannan, Kreepa G. Kooblall, Mark Stevenson et al. Apr 01, 2025 DOI: 10.1016/j.jbc.2025.108404

Superconducting microwave oscillators as detectors for ESR spectroscopy

Applied Physics Letters R. Russo, A. Chatel, N. Brusadin et al. Apr 01, 2025 DOI: 10.1063/5.0260098

Microwave superconducting resonators are extensively studied in fields such as quantum computing and electron spin resonance (ESR) spectroscopy. However, the integration of superconducting resonators with feedback mechanisms to create ultra-low noise oscillators is a relatively unexplored area, and the application of such oscillators in ESR spectroscopy has not yet been demonstrated. In this work, we report the design, fabrication, and application of microwave oscillators based on superconducting resonators for ESR spectroscopy, illustrating an alternative way for the improvement of the performance of oscillator based ESR sensors. Specifically, ESR spectra are obtained by measuring the oscillator's frequency shift induced by the ESR effect as a function of the applied static magnetic field. The oscillators are composed of a single heterojunction bipolar transistor or high electron mobility transistor coupled with NbTi or YBa2Cu3O7 (YBCO) superconducting resonators. The fabricated oscillators operate at frequencies of 0.6 and 1.7 GHz and temperatures up to 80 K (for YBCO resonators) and 8 K (for NbTi resonators). The lowest measured frequency noise is about 9 mHz/Hz1/2 (−139 dBc/Hz), the best spin sensitivity is about 1×1010 spins/Hz1/2, and the best concentration sensitivity is about 3×1018 spins/Hz1/2m3. The approach proposed in this work should allow for significantly better spin and concentration sensitivities compared to those achievable with normal conductors, up to operating frequencies, magnetic fields, and temperatures, where superconductors exhibit substantially lower effective microwave resistance than normal conductors.

Influence of exogenously applied k-carrageenan at various concentrations on plant growth, phytochemical content, macronutrients, and essential oils of Ocimum basilicum

Scientific Reports Mai Hosny Mohamed, Ahmed N. Abdelhamid, Mahmoud A. A. Ali et al. Apr 01, 2025 DOI: 10.1038/s41598-025-93479-3

Abstract Food safety and security are now among the most urgent problems to be resolved as the world’s population continues to grow. Intensive agriculture is required to meet the demands of a growing population and guarantee greater agricultural yield. Chemical pesticides and fertilizers are an essential part of intensive farming. Their extensive use accelerates the depletion of other important and minor nutrients, resulting in poor soil fertility and nutritional imbalance. There are serious health and environmental hazards associated with several of these hazardous agricultural chemicals. In context, for the first time, this study represents an innovative experiment exploring the impact of exogenously applied k-carrageenan on plant growth, physiological parameters, phytochemical content, macronutrients, and essential oil percentage in Ocimum basilicum plants. The investigation assessed the effect of varying k-carrageenan levels; 0.30, 0.60, 0.90, and 1.20 mM versus untreated control. The findings revealed that all k-carrageenan treatments significantly enhanced growth indicators compared to the control. The phytochemical analysis demonstrated that foliar application of k-carrageenan, particularly at 1.20 mM, significantly enhanced total chlorophyll, chlorophyll a, chlorophyll b, and total carbohydrate and essential oil percentage compared to the untreated control. O. basilicum essential oils show rich, nuanced flavors with higher levels of Methyl cinnamate, Camphor, trans-methyl cinnamate, Eucalyptol, Linalool, and β-Caryophyllene among treatments. Treatment effects were also observed in the macroelements content of Nitrogen (N), phosphorus (P), and potassium (K). k-carrageenan-induced alterations were noted in the contents of essential oil compounds. These results suggest that k-carrageenan can be a growth-promoting agent and significantly enhance essential oil yield, particularly in O. basilicum plants.

IRDiRC perspectives on the application of digital biomarkers in therapeutic development for rare diseases

Nature Reviews Drug Discovery Rajesh Krishna, Anneliene H. Jonker, Thomas Morel et al. Apr 01, 2025 DOI: 10.1038/d41573-024-00196-z

Simultaneous Isotropic Omnidirectional Hypersensitive Strain Sensing and Deep Learning‐Assisted Direction Recognition in a Biomimetic Stretchable Device (Adv. Mater. 17/2025)

Advanced Materials Muzi Xu, Jiaqi Zhang, Chaoqun Dong et al. Apr 01, 2025 DOI: 10.1002/adma.202570126

Simultaneous AoLP and DoLP Detection in a Bias‐Switchable PdSe <sub>2</sub> /MoS <sub>2</sub> /PdSe <sub>2</sub> Heterojunction for Polarization Discrimination

Advanced Materials Xiaofei Ma, Zeping Wang, Qinggang Qin et al. Apr 01, 2025 DOI: 10.1002/adma.202500572

Abstract On‐chip polarized photodetectors play a crucial role in advancing ultra‐compact optoelectronic devices for next‐generation technologies. However, simultaneously detecting the angle of linear polarization (AoLP) and the degree of linear polarization (DoLP) within a single device remains a challenging task, particularly due to the inherently weak polarization states found in naturally anisotropic materials. In this paper, it is reported on the development of a twisted monopole barrier photodetector based on a PdSe 2 /MoS 2 /PdSe 2 configuration. This photodetector features a rapid response time of 7–12 µs. In an imaging demonstration, it operates as a single‐polarization photodetector, reconstructing AoLP and DoLP distributions of target objects through bias‐switchable polarization detection across a wide spectral range, all without the plasmonic/metasurface nanostructures or polarization filters. Additionally, it demonstrates bipolar characteristics under zero‐bias conditions at room temperature, enabling dual‐binary coding for polarimetric‐encoded communication. These combination of features positions the photodetector as a highly promising candidate for on‐chip applications.

Stress-induced changes in endogenous TP53 mRNA 5′ regulatory region

Journal of Biological Chemistry Jin Yeong Kim, Alexandra Furney, Brittany Benner et al. Apr 01, 2025 DOI: 10.1016/j.jbc.2025.108418

Hot electron spectroscopy for intrinsic Schottky barrier determination at metal–InGaZnO interfaces

Applied Physics Letters Yuan Kai, Jiawei Wang, Congyan Lu et al. Apr 01, 2025 DOI: 10.1063/5.0248175

In this Letter, a three-terminal hot electron transistor is developed to explore the energy alignment between metal and amorphous indium–gallium–zinc oxide (a-IGZO). Utilizing detailed analysis of the hot electron current as a function of the applied bias voltage, the intrinsic Schottky barrier height is precisely determined at 1.2 eV between metal contact (Au) and a-IGZO. Systematic reduction of the sputtering oxygen flow rate during a-IGZO film deposition from 6 to 4.5 sccm and subsequently to 3 sccm resulted in a progressive decrease in the Schottky barrier height to 0.94 and 0.85 eV, respectively. This could be attributed to the increased concentration of oxygen vacancies in a-IGZO, which induces changes in bandwidth as confirmed by further ultraviolet photoelectron spectroscopy and x-ray photoelectron spectroscopy characterizations. Compared to the methods of traditional thermionic emission theory and Fowler–Nordheim tunneling model to extract Schottky barrier height, this study provides a more feasible approach for evaluating the barriers at the metal–semiconductor interface.

Impact of different capping materials extracts on proliferation and osteogenic differentiation of cultured human dental pulp stem cells

Scientific Reports Nihal A. Sultan, Hamdi H. Hamama, Mohammed E. Grawish et al. Apr 01, 2025 DOI: 10.1038/s41598-025-93759-y

Abstract This study aimed to evaluate the effects of four bioactive capping material extracts on the proliferation and osteogenic differentiation of human dental pulp stem cells. Four capping material extracts were evaluated in this study [Harvard MTA (calcium silicate), Retro MTA (calcium zirconia complex material), Activa Bioactive Base/Liner (bioactive glass-based material) and an experimental MCP-based pulp capping material). The materials prepared according to their manufacturers’ instructions in the form of discs. Each material disc was placed into one insert of a 6-well plate and covered with Dulbecco’s Modified Eagle Medium to produce extracts at 1:1 ratio. Human dental pulp stem cells represent the negative control group, cells cultured in osteogenic media represent the positive control group, while cells cultured on the tested extracts represent the test groups. Each specimen was assessed in triplicate by three independent assays. The proliferation of stem cells was evaluated via MTT assay and cell viability was determined by measuring optical density. Osteogenic differentiation was assessed via the alizarin red stain test by measuring the H-score and calcium concentration. The proliferation and osteogenic differentiation data were analyzed using one-way ANOVA followed by Tukey’s post hoc multiple comparison test (p ≤ 0.05). Regarding MTT assay results, osteogenic media was significantly greater than calcium zirconia complex and MCP-based material. In comparison with negative control and calcium zirconia complexes, calcium silicate significantly increased the optic density. Alizarin red staining revealed significantly low H-scores and calcium concentrations in the four tested capping materials in comparison with control group. The calcium concentration of calcium silicate material was significantly greater than the remaining tested materials.Calcium silicate-based materials seem to have the most reliable performance concerning the proliferation and osteogenic differentiation of human dental pulp stem cells. Newly introduced resin-based materials have shown acceptable results but need further investigation. The present study had a few limitations; mainly the need to perform more laboratory evaluations and in vivo studies.

Superconductivity in PrNiO<sub>2</sub> Infinite‐Layer Nickelates

Advanced Materials Hoshang Sahib, Aravind Raji, Francesco Rosa et al. Apr 01, 2025 DOI: 10.1002/adma.202416187

AbstractSeveral reports about infinite‐layer nickelate thin films suggest that the superconducting critical temperature versus chemical doping phase diagram has a dome‐like shape, similar to cuprates. Here, a highly reproducible superconducting state in undoped PrNiO2 thin films grown on SrTiO3 are demonstrated. Scanning transmission electron microscopy measurements show coherent infinite‐layer phase with no visible stacking‐fault defects, an overall high structural quality where possible unintentional chemical doping or interstitial oxygen, if present, sum well below the measurable threshold of the technique. X‐ray absorption measurements show very sharp features at the Ni L3,2‐edges with a large linear dichroism, indicating the preferential hole occupation of Ni1+‐3 orbitals in a square planar geometry. Resonant inelastic X‐ray scattering measurements reveal sharp magnon excitations of 200 meV energy at the magnetic Brillouin zone boundary, highly resonant at the Ni1 + absorption peak. The results indicate that, when properly stabilized, infinite‐layer nickelate thin films are superconducting without chemical doping.

Inefficient maturation of disease-linked mutant forms of the KCC2 potassium-chloride cotransporter correlates with predicted pathogenicity

Journal of Biological Chemistry Morgan Kok, Ishika Singh, Elias Aizenman et al. Apr 01, 2025 DOI: 10.1016/j.jbc.2025.108399