Browse Articles

Discover research articles across all indexed journals

Effect of Sr interlayer on the epitaxy and band alignment of MgO-buffered Si(100)

Journal of Applied Physics Pablo Espinosa Argaiz, Hanran Jin, Agham B. Posadas et al. Jun 28, 2026 DOI: 10.1063/5.0326426

Magnesium oxide (MgO)-buffered silicon is an effective pseudo-substrate that enables the epitaxial integration of functional oxides on silicon. Its high thermal stability also serves as a good diffusion barrier that prevents silicon migration to the oxide layer and provides both electrical and optical isolation. We report on the process of forming epitaxial MgO thin films on Si(100) by molecular beam epitaxy using a Sr submonolayer to limit bulk Si oxidation even in the presence of oxygen. The films are characterized using x-ray diffraction, x-ray reflectivity, x-ray photoelectron spectroscopy, reflection-high-energy electron diffraction, scanning transmission electron microscopy, and electron energy loss spectroscopy. The in-plane epitaxial relationship is MgO 〈100〉||Si 〈100〉 with a 4:3 coincident site arrangement between the MgO and Si conventional unit cells. The effect of the Sr submonolayer on the band alignment between MgO and Si is also measured and theoretically modeled using first principles calculations.

Comment on “Reduction of magnetic-field-induced shift in quantum frequency standards based on coherent population trapping” [J. Appl. Phys. 137, 164402 (2025)]

Journal of Applied Physics E. A. Tsygankov Jun 28, 2026 DOI: 10.1063/5.0307718

In the work of Tsygankov et al. [Phys. Rev. A 109, 053703 (2024)], it was demonstrated that the phase modulation of the two-photon detuning leads to the multipeak structure of the coherent population trapping resonance. Recently, an article [Vishnyakov et al., J. Appl. Phys. 137, 164402 (2025)] was published where an interplay between side peaks from hyperfine transitions mFg=∓1⇆mFg=∓1 and the central one from the magneto-insensitive one in 87Rb atoms is used to reduce the frequency sensitivity of the resonance to magnetic field’s variations. In this Comment, I address an interpretation given in the work of Vishnyakov et al. [J. Appl. Phys. 137, 164402 (2025)] that the multipeak structure is due to additional sidebands of the optical field’s spectral components, which are provided by modulation. It is demonstrated that in this case, the peaks should have amplitudes that are not observed experimentally and contradict analytical results of Tsygankov et al. [Phys. Rev. A 109, 053703 (2024)].

Comparison of discharge and surface characteristics of single-crystal and polycrystalline lanthanum hexaboride emitters in a hollow cathode

Journal of Applied Physics Ryohei Takagi, Shinatora Cho, Hiroki Watanabe et al. Jun 28, 2026 DOI: 10.1063/5.0333874

The applicability of single-crystal lanthanum hexaboride emitters in hollow cathodes was investigated through comparative operational tests and surface analyses with polycrystalline emitters. The discharge voltage of the single-crystal emitter was slightly higher than that of the polycrystalline emitter, but the difference was not significant, while the electron temperature and electron density were nearly identical. This behavior is presumably due to the fact that the low-work function crystal planes were not effectively utilized in the single-crystal emitter. The single-crystal emitter exhibited superior resistance to contamination, preserving surface integrity even in high-temperature regions, while the polycrystalline emitter accumulated more carbon and oxygen contamination. However, although the sample number was limited to two, rapid increases in discharge current caused cracks due to thermal shock in both of the two single-crystal emitters tested. In one case, a complete brittle fracture was observed, as evidenced by hackle patterns, rib marks, and fatigue striations. In contrast, no cracking or fracture was observed in the polycrystalline emitter, likely because grain boundaries mitigated the thermal stress. These results highlight a critical trade-off: single-crystal emitters offer contamination resistance, but require careful thermal design to prevent fracture, whereas polycrystalline emitters provide structural robustness at the expense of contamination susceptibility. This study provides guidance for selecting lanthanum hexaboride crystal structures in hollow cathode applications.

A symmetric unified transport and charge model for metal–oxide–semiconductor field-effect transistor from diffusive to ballistic regimes

Journal of Applied Physics Chien-Ting Tung Jun 28, 2026 DOI: 10.1063/5.0339948

This paper presents a symmetric unified transport compact model for metal–oxide–semiconductor field-effect transistors (MOSFETs) that bridges drift-diffusion (DD) and ballistic transport (BT) regimes. The proposed model self-consistently accounts for both current and charge across the DD–BT transition. Quantum capacitance and carrier transport are incorporated into the charge density formulation. Drain-side velocity saturation and the source-side thermal velocity limit are unified within a single framework using a physically motivated high-field scattering length, enabling accurate modeling from DD square-law behavior to the ballistic limit. In addition, a physical channel charge and capacitance model is developed to capture capacitance reduction in the quasi-ballistic regime, which is not considered in standard compact models. The model is verified using theoretical analysis and experimental data from MOSFETs with multiple channel lengths, achieving accurate fitting using only physically motivated model parameters. The formulation is continuous and symmetric, and it passes both DC and AC symmetry tests.

Influence of negative ions on the stoichiometry and structure of carbon nitride films deposited by reactive magnetron sputtering

Journal of Applied Physics Christian Wieschhoff, Chantal Theile-Rasche, Fuzeng Wang et al. Jun 28, 2026 DOI: 10.1063/5.0335780

Magnetron-sputtered CNx thin films are primarily employed as hard, low-friction protective and tribological coatings, as solar cells, and for catalytic applications. Lower growth rates and a reduced N content, favoring graphitic sp2 structures, hinder industrial scalability due to prolonged deposition times and produce softer, less dense films with inferior hardness, elasticity, and wear resistance. Carbon nitride films deposited by magnetron sputtering exhibit growth behavior strongly influenced by plasma–surface interactions. However, nitrogen resputtering and reduced film growth rates are commonly attributed to chemical etching by positive ions. We propose an additional, unreported power-dependent mechanism involving negative ions formed at the carbon target. These ions are accelerated through the plasma sheath, reaching the substrate with high kinetic energy and inducing both chemical and physical resputtering. This effect is localized to the geometrical projection of the target, as shown by spatially resolved analysis: ellipsometry reveals thickness reduction, and x-ray photoelectron spectroscopy and Raman spectroscopy indicate nitrogen depletion within this region. Correlation between stoichiometry and structural signatures confirms the decisive role of negative ions in modifying the film composition and microstructure. At the same time, the composition of the gas mixture exerts only a minor effect.

Stress-induced diffusion suppression and defect-related B-mode breakdown in thermal SiO2 on Czochralski silicon

Journal of Applied Physics Yoshio Murakami Jun 28, 2026 DOI: 10.1063/5.0332409

We present an analytical model describing the degradation of the dielectric breakdown field in thermal SiO2 films grown on Czochralski (CZ) silicon substrates containing void-type defects, such as crystal-originated particles. The model quantitatively reproduces the experimentally observed inverse square-root dependence of the breakdown field on oxide thickness, as well as the distinct breakdown characteristics between dry and wet oxidation. Within the framework of the classical Deal–Grove oxidation theory, we incorporate the effect of locally enhanced stress at concave defect regions. The stress is assumed to suppress the oxidant diffusion coefficient, leading to a reduction of the parabolic oxidation rate constant and consequently to localized oxide thinning. This geometrical thinning enhances the local electric field and induces defect-related B-mode breakdown. The present formulation provides a physically consistent explanation of oxide-thickness-dependent breakdown behavior in defect-containing CZ silicon and offers a unified interpretation of stress-induced degradation mechanisms in thermal oxides.

Tamping-induced densification and transient phase transformation in heterogeneous Ni–Al cold spray: An atomic-scale study

Journal of Applied Physics Xueyan Cui, Zemin Sheng, Xiao Liu et al. Jun 28, 2026 DOI: 10.1063/5.0314361

Current cold spray research relies predominantly on simplified single-particle impact models, which cannot capture the critical effects of multi-particle interactions and complex thermal histories on coating microstructures, particularly in dissimilar material systems. This study employs molecular dynamics simulations to investigate sequential deposition of Ni–Al heterogeneous particles onto an aluminum substrate. Results reveal three distinct velocity-dependent regimes of coating evolution: (1) At sub-critical velocities (500 m/s), insufficient localized plasticity results in porous deposits with unclosed interfacial voids; (2) within the optimal 750–1000 m/s window, a pronounced tamping effect from subsequent impacts synergizes with strain localization facilitated by rigid Ni particles, driving extensive strain field overlap and layer densification; (3) at hyper-critical velocities (1250 m/s), global thermomechanical instability causes severe substrate erosion. Microstructural analysis reveals a fundamental asymmetric thermomechanical response: the softer Al phase undergoes transient local melting, deforming via viscous flow, while the harder Ni phase predominantly retains its solid crystalline structure, deforming through dislocation-mediated plasticity. Quantitative dislocation analysis shows the total dislocation segment count (Nseg)—a proxy for work hardening capacity—peaks at 1000 m/s, then declines sharply at 1250 m/s due to complete defect annihilation in molten Al and onset of dynamic recovery in solid Ni. This work establishes a physics-based processing window (750–1000 m/s) for Ni–Al/Al systems that balances mechanical densification with thermodynamic stability, highlighting the pivotal roles of cumulative heating and asymmetric phase transformations in cold spray additive manufacturing.

Study of the plasma dynamic response mechanism of Q235 steel under magnetic field-assisted combined laser irradiation

Journal of Applied Physics Chen Zheng, Shuang Li, Wenhui Fang et al. Jun 28, 2026 DOI: 10.1063/5.0332189

This study investigates magnetic field-assisted combined laser irradiation of Q235 steel, constructing a two-dimensional coupled simulation model integrating the two-temperature model and magnetohydrodynamics, to explore the intrinsic mechanisms of plasma evolution and surface morphology reconstruction under the synergistic effect of magnetic field and combined laser. The results show that magnetic field control induces oscillations in laminar velocity and suppresses plasma expansion. The Lorentz force effectively constrains the plasma, enhancing its aggregation, and shrinking the emission region, thereby increasing local energy density and enhancing detection sensitivity. The coupling effect of the magnetic field and laser drives the flow field to transition to vortex flow, promoting reactant mixing and heat transfer. The magnetic field enhances the plasma spectral response, increasing spectral line intensity and the number of characteristic peaks, while also elevating the electron temperature and driving the electron density to a plateau. The magnetic field enhances plasma mass transfer, buffering combustion wave recoil damage, optimizing solidification behavior in the remelted zone, and controlling surface roughness.

Phase 3 Trial of Oral Infigratinib in Children with Achondroplasia

New England Journal of Medicine Ravi Savarirayan, Julie Hoover-Fong, Melita Irving et al. Jun 28, 2026 DOI: 10.1056/nejmoa2604565

Investigating grain boundary segregation in latent space via dimensionality reduction and descriptor-based interfacial diagrams

Journal of Applied Physics Aidan H. Gesch, Jingyi Zhou, Chongze Hu Jun 28, 2026 DOI: 10.1063/5.0333193

We perform hybrid molecular dynamics/Monte Carlo simulations to investigate Ag segregation at representative Cu Σ5 grain boundaries (GBs) and compute smooth overlap of atomic positions (SOAP) vectors to characterize the local environment of each atom. The resulting high-dimensional SOAP vectors are subsequently transformed into a latent representation using both linear and non-linear dimensionality reduction methods. Among these approaches, principal component analysis demonstrates the most robust performance, as it not only effectively distinguishes the atoms in the GB regions from those in the bulk phases, but also captures the Ag segregation behavior at Cu GBs. In contrast, non-linear reduction methods work well only for pristine GBs and become less efficient for Ag-segregated boundaries. Furthermore, we show that the mean and variance of the SOAP vectors can serve as effective fingerprints for describing key structural features and local chemistry of GBs in three-dimensional (3D) space. By mapping these descriptors as a function of temperature and composition, we construct descriptor-based interfacial diagrams that correlate strongly with conventional GB diagrams, including those associated with segregation and disorder. This study not only demonstrates the critical roles of developing GB descriptors for GB structural analysis in latent representations, but also significantly enriches the family of interfacial diagrams.

A non-Foster superconducting broadband matching network

Journal of Applied Physics A. K. Yi, P. Stark, C. Bartram Jun 28, 2026 DOI: 10.1063/5.0332649

The nonlinear inductance of the Josephson junction has enabled the development of a wide range of continuous-variable amplifiers and qubit-based devices with unprecedented sensitivity. We present an alternative use of the Josephson junction in the context of broadband impedance matching. The idea poses a potential solution to a longstanding problem in the field of high energy particle physics. The axion, a compelling candidate for the dark matter, converts to a weak electromagnetic signal at an as-yet unknown frequency. As such, the ideal axion detector does not compromise bandwidth for sensitivity, a trade-off intrinsic to all linear, time-invariant, and passive circuits. We propose a circuit that uses a Josephson junction in an impedance matching network to overcome these gain-bandwidth constraints and increase the scan rate of axion searches. The Josephson junction can be biased to exhibit negative inductance capable of canceling geometric inductance similar to a capacitor but across a wider frequency range.

All-optically controlled artificial synaptic device based on PZT photochromism for biomimetic visual memory imaging systems

Journal of Applied Physics Xiyue Fang, Shan Yang, Jiarong Zhang et al. Jun 28, 2026 DOI: 10.1063/5.0332044

Neuromorphic vision systems are critical for high-efficiency edge intelligence, yet mainstream electrically controlled synaptic devices suffer from irreversible ion migration and poor biomimetic imaging capability. Herein, we propose an all-optically controlled artificial synaptic device based on the photochromic effect of lead zirconate titanate ceramics. By adopting an asymmetric strategy of 395 nm ultraviolet light writing and 808 nm infrared light erasing, it simulates biological synapses’ bidirectional plasticity. A biomimetic visual memory imaging system was further constructed, which exhibits long-term paired-pulse facilitation (PPF) beyond short-term plasticity. The PPF index (18%–85%) is flexibly tunable via pulse interval, duration, and background light intensity, realizing dynamic imaging that mimics the brain's memory-forgetting-reconsolidation process. This all-optical scheme offers a highly programmable platform for biomimetic visual systems integrating sensing, memory, and computation.

Octave-spanning terahertz quarter-wave plates based on over-coupled Fabry–Pérot resonances in reflective metal–dielectric–metal metasurfaces

Journal of Applied Physics Tae Gwan Park, Chun-Chieh Chang, Antoinette J. Taylor et al. Jun 28, 2026 DOI: 10.1063/5.0332813

Compact devices for broadband polarization control in the terahertz (THz) regime remain challenging to realize due to the intrinsic phase dispersion associated with birefringent materials and resonant structures. Here, we demonstrate achromatic THz quarter-wave plates with near-unity efficiency and operating under a wide range of incidence angles, based on over-coupled metal–dielectric–metal reflective metasurfaces. The devices operate as single-port anisotropic Fabry–Pérot cavities, in which the phase dispersion of the over-coupled resonances is engineered to maintain an approximately constant relative phase delay between orthogonal field components over a broad frequency range. Four complementary metasurface designs operating at an incidence angle of 45° collectively cover the 0.25–3 THz frequency range accessible to a typical THz time-domain spectroscopy system. Each device exhibits an approximately octave-wide operational bandwidth, with axial ratios below 3 dB and polarization-conversion efficiencies exceeding 80% across most of the operating band. Systematic structural optimization suppresses coupling to diffraction and guided-wave modes, thereby further extending the usable bandwidth while preserving the required phase relationship between orthogonal polarizations. The demonstrated metasurfaces are compatible with wafer-scale fabrication processes, and experimental results show excellent agreement with simulations. These findings establish over-coupled reflective metasurfaces as a robust, scalable, and versatile platform for broadband THz polarization control.

Fabry–Pérot quasi-bound states in the continuum-enabled active terahertz absorption in bulk Dirac semimetal metasurface

Journal of Applied Physics Yu Zhong, Xin Huang, Qi Lin et al. Jun 28, 2026 DOI: 10.1063/5.0339192

Actively tunable terahertz absorbers featuring both high quality factors and spectral stability are highly desirable for narrowband modulation and sensing, yet achieving these two properties simultaneously remains challenging. Here, we propose a bulk Dirac semimetal metasurface that supports a Fabry–Pérot bound state in the continuum (F-P BIC) arising from doubly degenerate magnetic-dipole modes at the Γ point. By tuning the spacer thickness, the ideal F-P BIC evolves into a quasi-BIC with finite radiative leakage, thereby enabling ultra-narrowband perfect absorption at critical coupling, with the narrowest bandwidth reduced to 1.45 × 10−4 THz. Coupled-mode-theory analysis and full-wave simulations reveal two critical-coupling branches with a total quality factor as high as 1.8 × 104. Electrical tuning of the Fermi energy of the bulk Dirac semimetal modulates the non-radiative loss channel, while a geometric compensation strategy maintains perfect absorption at an almost fixed operating frequency, thereby enabling bandwidth tunability. In addition, the absorber exhibits good angular robustness up to 30°. These results provide a practical route toward high-Q, electrically tunable, and frequency-stabilized terahertz absorbers.

Effects of shock-induced α (bcc) → ɛ (hcp) phase transition on spall failure in Fe–Mn alloys

Journal of Applied Physics Jackson L. Smith, Gregory Kennedy, William A. Abraham et al. Jun 28, 2026 DOI: 10.1063/5.0333004

Plate-impact experiments were conducted on Fe–Mn alloys containing 4, 7, and 11 at. % Mn to investigate the role of shock-induced α(bcc) → ɛ(hcp) phase transformations on wave dissipation and subsequent spall failure. Increasing Mn content systematically reduced the transformation threshold pressures from 13 GPa for pure Fe to 9.19 ± 0.56, 7.66 ± 0.45, and 4.64 ± 0.31 GPa for Fe–4Mn, Fe–7Mn, and Fe–11Mn, respectively. In addition, the phase transformation broadened the shock front, with rise times nearly doubling due to kinetic delays, latent heat absorption, and structural rearrangements. Time-resolved metrics including the decompression strain rate, velocity pullback, recompression slope, and oscillation periods, respectively, link the transformation-induced changes in effective stiffness, wave attenuation, and void-growth kinetics to the observed spall failure response, including generation of multiple spall planes revealed in soft-recovered impacted samples of Fe–Mn alloys. The spall strength, determined from analysis of pullback signals, increased by 78%–90% due to the preceding phase transformation, demonstrating that transformation-mediated loading and unloading strongly influences spall failure. The findings highlight that compositional tuning promoting shock-induced phase transformation can enable damage mitigation caused by spall failure.

A self-consistent field–matter approach for pump–probe measurements in ultrafast materials

Journal of Applied Physics M. Rimbert, Q. Fornasiero, J.-F. Lampin et al. Jun 28, 2026 DOI: 10.1063/5.0336165

Quantitative interpretation of ultrafast pump–probe experiments requires a consistent treatment of the excitation stage, particularly under strong optical pumping where absorption saturation and interference effects become significant. We present a time-domain self-consistent framework that couples electromagnetic field propagation to semiconductor Maxwell–Bloch dynamics in thin absorbing layers. The model explicitly accounts for state filling, nonlinear absorption, and standing-wave effects without introducing phenomenological generation terms or adjustable scaling parameters. The approach is applied to low-temperature-grown GaAs layers deposited on gold mirrors, corresponding to a low-Q cavity configuration. Simulations quantitatively reproduce both the linear reflectivity oscillations as a function of layer thickness and the nonlinear saturation behavior observed experimentally. The maximum pump-induced reflectivity change is predicted from intrinsic material parameters alone. This framework provides a physically consistent basis for analyzing pump–probe measurements in multilayer absorbing structures and offers a predictive tool for the modeling and design of nonlinear semiconductor absorbers, including semiconductor saturable absorber mirrors.

Low-frequency and broadband waterborne muffler based on low acoustic impedance arc-shaped metamaterials

Journal of Applied Physics Chao Wang, Zhoufu Zheng, Yutong Qin et al. Jun 28, 2026 DOI: 10.1063/5.0335787

Low-frequency noise control in ship seawater pipeline systems remains challenging, as mufflers are required to deliver good broadband performance within compact spaces. Inspired by bladder mufflers that exploit the strong impedance mismatch between low-impedance air and water for efficient sound reflection, this work introduces low-impedance arc-shaped metamaterials (ASMs) into conventional expansion-chamber mufflers and proposes a compact waterborne muffler. Based on different integration methods between the ASM and the expansion chamber, three muffler configurations are developed: Model B (circular chamber with annular ASM), Model C (circular chamber with revolved ASM), and Model D (square chamber with planar ASM). The equivalent acoustic parameters of the ASM are calculated and analyzed using homogenization theory. Results demonstrate that increasing the central angle of the arc-shaped beam or adjusting the deflection angle of the metamaterial significantly reduces its equivalent acoustic impedance, thereby enhancing low-frequency noise-reduction performance. Numerical simulations show that, compared with conventional expansion-chamber mufflers, the introduction of low-impedance ASM significantly improves the transmission loss (TL) in the low-frequency range and broadens the effective noise-reduction bandwidth. As a proof of concept, a muffler specimen based on Model B is fabricated and tested in a water-filled circulating pipeline system. The measured TL agrees well with simulations, yielding an average TL of 15.7 dB and an average insertion loss (IL) of 10.9 dB in the 200–2000 Hz band. This work provides a new approach for low-frequency noise control in fluid-filled pipeline systems and holds potential for applications in marine engineering and ocean equipment.

Determination of the mass transport parameters in thin membranes by phase-sensitive photoacoustics in the optically transparent and mixed regimes

Journal of Applied Physics Pawel Rochowski Jun 28, 2026 DOI: 10.1063/5.0340944

The research complements and extends the scope of the work reported in “LED-based multibeam photoacoustics combined with electrical circuit-based modelling for the analysis of multispecies mass transport through thin membranes” (arXiv:2602.20902). In particular, this work investigates the impact of the sample’s absorption properties on the ability to quantify slow mass transport processes in thin membranes under optically transparent and semi-opaque conditions. The theoretical framework is based on Green’s function approach as formalized by Mandelis. Owing to the separation of photoacoustic and mass transport timescales, the heat distributions are assumed to follow the temporal mass concentration profiles predicted by a Fickian diffusion process. The approach is further examined and validated using experimental data on pigment transport into a thin porous membrane. Detailed experimental results are provided in the referenced paper.

Tunable extinction and near-perfect absorption in graphene plasmonic terahertz metasurfaces

Journal of Applied Physics Mohammad Esmaeil Daraei, Mehdi Abedi-Varaki, Ignas Nevinskas Jun 28, 2026 DOI: 10.1063/5.0337878

An extinction-centered framework is established for designing tunable graphene plasmonic metasurfaces in the terahertz (THz) regime. A deeply subwavelength, radially symmetric graphene resonator is analyzed using finite-difference time-domain and finite element method simulations, with explicit separation of absorption, scattering, and extinction cross sections. The structure supports localized plasmonic modes with normalized extinction that approaches or exceeds unity, demonstrating a strong resonant coupling between incident radiation and graphene plasmons over an effective electromagnetic area comparable to or larger than the physical footprint. The dominant resonance exhibits independent tunability via electrical gating, material loss, geometric scaling, and dielectric environment. Chemical potential controls resonance frequency, while carrier relaxation time primarily governs linewidth and peak extinction. Environmental permittivity and geometrical scaling enable predictable resonance positioning while preserving near-optimal efficiency. Using this extinction-driven design principle, we realize a graphene metamaterial absorber with electrostatically tunable near-unity THz absorption. The strong field confinement further yields high refractive index sensitivity and competitive sensing figure of merit values. These results establish extinction cross section as a unifying physical metric for tunable THz graphene metasurfaces, absorbers, and sensing platforms.

Nonradiative carrier capture by point defects in irradiated GaN

Journal of Applied Physics Alexander S. Hauck, Miaomiao Jin, Blair R. Tuttle Jun 28, 2026 DOI: 10.1063/5.0325688

In this work, accurate electronic structure calculations are employed to investigate key radiation-relevant defects in gallium nitride, including point defects (vacancies, interstitials, and antisites) as well as the gallium–nitrogen divacancy. Nonradiative carrier capture via multiphonon emission was explored for each of the thermodynamic charge transition levels identified for these defects. Benchmarking was performed using a carbon substitutional defect on a nitrogen site, yielding results that agree well with previous electronic structure and photoluminescence results. Seven defect charge transitions were found to have capture coefficients above 10−10 cm3/s at 300 K: octahedral Gai (+3/+2) electron capture, octahedral Gai (+2/+1) electron capture, tetrahedral Gai (+1/0) electron capture, VN (+1/0) electron capture, VGa (0/+1) hole capture, split Ni (0/−1) electron capture, and VN (0/−1) electron capture. These transitions play a central role in governing defect charge-state populations and the resulting carrier recombination dynamics under irradiation. Previous displacement damage studies found relatively high concentrations of vacancies and nitrogen interstitials; therefore, VGa (0/+1) hole capture, split Ni (0/−1) electron capture, and VN (0/−1) electron capture are likely key contributors to radiation-induced performance degradation in GaN devices.