Browse Articles

Discover research articles across all indexed journals

Investigation on shock-induced luminescence of transparent alumina nanocrystalline ceramics

Journal of Applied Physics Mingxuan Tang, Wenshuo Yuan, Lei Yang et al. Jun 28, 2026 DOI: 10.1063/5.0335217

High-density nanocrystalline transparent ceramics of cubic alumina (γ-Al2O3) were fabricated using nanocrystalline γ-Al2O3 powder as the starting material under a temperature–pressure condition of 4.2 GPa and 300 °C. Subsequently, the optical transmission and shock-induced luminescence performance of the as-fabricated transparent ceramics, serving as optical window materials, were characterized under varying shock pressures via plate impact experiments on a two-stage light gas gun. The experimental results show that, in contrast to the optical signal attenuation observed in single-crystal sapphire under shock loading, the γ-Al2O3 nanocrystalline transparent ceramic windows still maintain good optical transparency for 1550 nm wavelength laser within the shock pressure range of approximately 36–96 GPa. Meanwhile, at similar shock pressures, the absolute radiance of the intrinsic shock-induced luminescence from the nanocrystalline γ-Al2O3 transparent ceramics is an order of magnitude lower than that of c-cut single-crystal sapphire. This demonstrates that the nanocrystalline alumina window material possesses superior shock optical transparency and weaker shock-induced luminescence compared to single-crystal sapphire.

Application of cosmic ray muon imaging technology in the detection of internal structures of cultural relics

Journal of Applied Physics Jianming Zhang, Jie Pang, Weichang Chen et al. Jun 28, 2026 DOI: 10.1063/5.0326969

The internal structural conditions of large-scale stone carvings are difficult to assess using conventional nondestructive testing techniques because of their large size, complex geometry, and long service history. In this work, the 3D internal structure of the stone carvings at Mingshan Temple was investigated using cosmic ray muon imaging. Muon flux data acquired from multiple observation points and directions were used to derive path-integrated density distributions. A 3D density inversion model incorporating geometric constraints was then developed, and an iterative reconstruction algorithm with an adaptive-relaxation factor was applied to image the cavity roof structure and the overlying mountain body. A refined 3D model, constructed by integrating unmanned aerial vehicle-derived digital elevation data with interior point-cloud measurements of the grotto, was introduced as a geometric prior to improve reconstruction stability under complex structural conditions. The results reveal a distinct low-density anomaly on the southern side of the roof slab of cave 8, consistent with the gullies observed on site, demonstrating the effectiveness of the proposed approach. These results indicate that cosmic ray muon imaging provides a promising nondestructive tool for internal structural investigation and risk assessment of large-scale stone cultural heritage.

From discovery to device: The orbital Hall effect in memory applications

Journal of Applied Physics Beichun Feng, Ping Wang, Jinyu Duan et al. Jun 28, 2026 DOI: 10.1063/5.0325538

The electron possesses two intrinsic forms of angular momentum: spin and orbital angular momentum. Over the past decade, the spin angular momentum of the electron has been extensively harnessed in spintronic devices, leading to many milestone achievements. In solids, however, the orbital degree of freedom has often been regarded as quenched due to the crystal field effect. Recently, studies leveraging the orbital angular momentum of electrons have unveiled a fascinating discovery: an orbital Hall effect can be observed in materials with weak spin–orbit coupling under an electric field, in which an orbital current can be generated to manipulate the magnetization of ferromagnetic materials and to design novel memory devices. In this review, we summarize key advances in the orbital Hall effect and orbital torque devices. After introducing the physical mechanism of the orbital Hall effect and related phenomena, we highlight orbital torque and associated device concepts. Several challenges facing the development of practical orbital torque devices are then discussed. This review aims to provide a comprehensive overview of the mechanism, detection, and functionalized devices of orbitronics and to explore their potential applications in memory devices, computing components, and terahertz emitters.

Intense cavitation-assisted electric discharge as a promising tool for water treatment

Journal of Applied Physics Alexander Gutsol, Yuriy Mirochnik, Andrey Starikovskiy Jun 28, 2026 DOI: 10.1063/5.0319343

This study investigates interrelations between one-electrode Cavitation-Assisted Electric Discharge (CAED), two-electrode CAED, and recently discovered Intense CAED (I-CAED). The one-electrode CAED is a self-triggered nanosecond discharge with pulse energy in the micro-Joule range, which can be generated even by a DC voltage. I-CAED consists of a non-equilibrium part within a low-pressure cavitating region and a micro-spark traversing a liquid film. We hypothesize that CAED propagates from the high-voltage electrode as an ionization wave through bubbles of saturated vapor. Subsequently, the streamer-like discharges in the bubbles may form a continuous plasma channel. Inside the cavitating region, the plasma is strongly non-equilibrium, providing an ideal environment for generating chemically unstable species such as hydrogen peroxide (H2O2). Plasma of I-CAED spark is characterized by high electron density and near-thermal equilibrium, emitting a continuous ultraviolet spectrum. The combination of these different discharge parts makes I-CAED in water a highly effective tool for the Advanced Oxidation Process, particularly in water disinfection. Experimentally demonstrated Electric Energy per Order value for disinfection of E. coli-contaminated water is as low as 0.135 ± 0.035 kWh/m3/order. Estimates show that the implementation of “dry electrodes” configuration reduces the erosion rate of the electrode material by at least one order of magnitude. Spectral analysis reveals that the continuum emission generated by I-CAED in proximity to metal electrodes deviates from the spectra of discharges spatially decoupled from the electrodes. We assume that this spectral divergence is attributable to blackbody-like emission originating from metallic nanoparticles form during the electrode's erosion process.

Investigating spin and orbital effects via spin–torque ferromagnetic resonance

Journal of Applied Physics J. L. Costa, E. Santos, A. Y. M. Tani et al. Jun 28, 2026 DOI: 10.1063/5.0320961

In this work, we experimentally investigate spin and orbital torque phenomena using the spin–torque ferromagnetic resonance technique in a series of bilayer systems composed of different normal metal materials. Permalloy and Ni were employed as ferromagnetic layers to probe the spin and orbital torque responses. For the SiO2/FM/NM bilayers, we extracted the damping-like and field-like torque components, as well as the damping-like torque efficiency for each sample, and compared our results with previously reported numerical and experimental data in the literature. Additionally, we experimentally demonstrate the presence of an out-of-plane torque component, which we attribute to interfacial mechanisms and associate with a spin–orbital polarized current along the z-direction. This interpretation is supported by the azimuthal angular dependence of the applied magnetic field. Our results provide compelling evidence of orbital torque associated with the orbital Hall effect in several materials, thereby broadening the prospects for magnetization switching driven by orbital torque.

Strain-induced topological transitions in black phosphorus metasurfaces for modulating near-field radiative heat transfer

Journal of Applied Physics Zihan Zhuang, Ceji Fu Jun 28, 2026 DOI: 10.1063/5.0337355

We demonstrate the strain-induced hyperbolic–elliptic topological transition in the near-field radiative heat transfer based on black phosphorus metasurfaces. By applying tensile strain in the zigzag (ZZ) direction, the polariton dispersion shows an extreme in-plane transition—from open hyperbolic to closed elliptic, associated with dramatical modulation effects on the heat flux. First-principles calculations show that a 6% ZZ tensile strain drives an effective-mass switch of electrons along the two crystal axes, which alters the anisotropy conductivity and triggers dispersion transitions. As a result, radiative channels in both frequency and momentum space are redistributed. The transition behavior can be further tuned by varying the tensile strain and electron doping concentration. Furthermore, the strain-induced modulation remains robust over a wide range of metasurface geometries, including different grating periods and filling factors. The proposed structure provides a compact framework for controlling nanoscale thermal radiation via strain-engineered dispersion tailoring in anisotropic two-dimensional systems.

Erratum: “Two-carrier model-fitting of Hall effect in semiconductors with dual-band occupation: A case study in GaN two-dimensional hole gas” [J. Appl. Phys. 137, 025702 (2025)]

Journal of Applied Physics Joseph E. Dill, Chuan F. C. Chang, Debdeep Jena et al. Jun 28, 2026 DOI: 10.1063/5.0329983

Plasmonically pumped WS2 monolayers: Combined experimental and theoretical insights into enhanced photocatalytic hydrogen production

Journal of Applied Physics Mohsin Ijaz Jun 28, 2026 DOI: 10.1063/5.0340475

Highly enhanced excitation density in transition metal dichalcogenides through integration with a plasmonic resonator due to the combined effect of Purcell’s enhancement and plasmonic hot electron injection highlights the promise for photocatalytic applications. Here, we report an unambiguous evidence of plasmon-enhanced photocatalytic hydrogen (H2) production from WS2 monolayers integrated with silver (Ag) nano-gratings. The coupling leads to significantly enhanced optical absorption and emission due to a combination of Purcell enhancement and plasmon-induced hot electron generation. Angle-resolved optical spectroscopy is used to identify resonant excitation conditions, which are subsequently employed in photoelectrochemical measurements, demonstrating enhanced photocurrent under resonance. Numerical modeling further confirms strong near-field enhancement and high hot electron density at the WS2/Ag interface. These findings establish plasmonically coupled WS2 platforms as promising candidates for efficient solar-to-H2 generation.

Propagation mechanism of non-step-flow direction BPDs into 4H-SiC epitaxial layers and their stacking fault expansion behavior

Journal of Applied Physics Alecsander N. Imhof, Nadeemullah A. Mahadik, Simon Sung et al. Jun 28, 2026 DOI: 10.1063/5.0324647

Basal plane dislocations (BPDs) are a primary reliability concern for SiC power electronics. Almost all BPDs propagating from the substrate to the epitaxial layer in 4H-SiC have line directions and Burgers vectors almost parallel to the step-flow growth direction. A novel and unexpected propagation mechanism of a BPD with the dislocation vectors 120° to the step-flow direction is reported. Direct imaging with multiple techniques, including after carrier injection, was performed to investigate the propagation mechanisms, microstructural analysis, and associated stacking fault (SF) expansion. It was found that the Burgers vector of this BPD was 13[2¯110] as opposed to the typical ±13[112¯0] and that its propagation was made possible through the interaction between the BPD and a threading mixed dislocation (TMD), which provided spiral growth steps in multiple directions. The interaction also causes the multiplication of SFs, which is described. Additionally, the TMD gets deflected on to the basal plane inside the epitaxial layer and forms a Frank + Shockley fault. The three physical mechanisms identified in SiC wafers increase a power device’s on-state resistance and reverse current leakage, thereby jeopardizing the device’s reliability.

Comparative study of sintered and eutectic ZrB2–SiC composites: Hardness, micro-scale fracture behavior, and interfacial effects

Journal of Applied Physics Shuntaro Ida, Teiichi Kimura Jun 28, 2026 DOI: 10.1063/5.0336219

ZrB2–SiC pseudo-binary composites were prepared using three distinct methods: spark plasma sintering (SPS), laser melting (LM), and arc melting (AM). The composites produced by SPS exhibited densely sintered microstructures, whereas those produced by AM exhibited typical eutectic microstructures. Both sintered and eutectic microstructures were observed in the composites prepared using LM. Nanoindentation test results indicated that the eutectic microstructures exhibited enhanced fracture toughness. In the sintered microstructure, the cracks propagated predominantly along the interfaces. In contrast, in the eutectic microstructure, the cracks tended to traverse the grain interior. The interfacial microregions exhibited intermediate hardness between those of the individual components of the sintered microstructure. However, in the eutectic microstructure, the hardness of the interfaces was comparable to that of SiC, suggesting that hardening occurred owing to dislocation accumulation in ZrB2 at the eutectic interfaces. These results demonstrate that the suppression of interfacial crack propagation at eutectic interfaces compared to sintered interfaces can be attributed to the enhanced plasticity of ZrB2 and interface strengthening via work hardening, which contribute to the overall higher fracture toughness of the eutectic microstructure.

Validation of 266 nm UV Raman thermometry using the alpha-to-beta quartz transition

Journal of Applied Physics Keegan Orr, Sophia V. R. Rocco, Suzanne M. L. Sheehe Jun 28, 2026 DOI: 10.1063/5.0336704

Ultraviolet Raman scattering is a promising diagnostic for temperature measurements relevant to dynamic compression experiments, where improved signal strength and reduced background are critical. In this work, we experimentally validate Raman thermometry at 266 nm using crystalline quartz heated through the α to β phase transition in a tube furnace. Quartz provides a useful benchmark because of its well-characterized transition temperature near 846 K at ambient pressure. Temperatures inferred from the Stokes to anti-Stokes intensity ratio are compared with thermocouple measurements and with the observed phase transition. Single-shot Raman temperatures track the thermocouple closely, with an empirical single-shot scatter of approximately ±15 K under the present conditions. Temporal averaging reduces shot-to-shot scatter and improves agreement between the Raman temperatures and thermocouple readings to within approximately 8 K, while the transition is identified within 5 K of the accepted value. Measurements are performed using the fourth harmonic of a nanosecond pulsed Nd:YAG laser at 266 nm. The shorter excitation wavelength provides enhanced Raman scattering efficiency and reduced visible background relative to conventional visible excitation. Comparison with 532 nm Raman measurements acquired in the same experimental geometry demonstrates substantially improved signal-to-noise ratio for the UV configuration. These results establish 266 nm Raman thermometry as a reliable and accurate temperature diagnostic under controlled heating conditions and provide a quantitative benchmark for future application in dynamic compression and shock physics experiments.

Compact Nandavarta-shaped metamaterial sensor for microwave detection of edible-oil adulteration

Journal of Applied Physics Sayed Mahmud, Shafaiyat Arefin Oman, Md. Azam Hossen et al. Jun 28, 2026 DOI: 10.1063/5.0334717

This paper presents a compact dual-band metamaterial absorber sensor based on a Nandavarta-shaped labyrinth resonator for microwave detection of edible-oil adulteration. The device addresses a critical food-safety gap by quantifying mineral-oil adulteration levels (0%, 10%, and 20%) in four commonly consumed edible oils through dielectric perturbation of two K-band resonances. The proposed 9 × 9 mm2 unit cell consists of a patterned copper meta-surface, a 1.6 mm FR-4 substrate, and a continuous copper ground plane. Four identical resonators arranged in a symmetric 2 × 2 configuration provide strong inductive–capacitive loading and enhanced near-field confinement. Full-wave CST simulations show two near-perfect absorption peaks at 18.015 and 20.13 GHz with absorption of 98.82% and 99.58%, respectively, along with polarization-insensitive and angle-stable performance. Metamaterial behavior is confirmed through effective-parameter retrieval and an equivalent RLC circuit model. Sensing is demonstrated using a 1 mm oil superstrate with controlled mineral-oil adulteration, producing distinct and monotonic resonance shifts. Experimental measurements using a vector network analyzer validate the simulated results.

Effect of hydrogen absorption on magneto-resistance curves of GMR wire with Fe–Si–B/Pd layer

Journal of Applied Physics Daiki Oshima, Takeshi Kato, Satoshi Iwata Jun 28, 2026 DOI: 10.1063/5.0337294

In this study, we investigated the effect of hydrogen absorption on the magneto-resistance (MR) properties of giant magneto-resistance (GMR) wires with a hydrogen-absorptive Pd layer and a magnetostrictive Fe–Si–B layer. The hard-axis MR curves of Pd-coated GMR wires fabricated on a polyethylene naphthalate substrate changed significantly after H2 exposure. This result is explained by the isotropic lattice expansion of Pd and the geometrical shape of the GMR wire, defined by microfabrication, indicating that mechanical stress was directionally exerted along the length of the wire. We successfully demonstrated that hydrogen can be detected based on changes in the MR properties of GMR wire, which can be fabricated at low cost using lithography techniques.

Mechanisms of nucleation, dislocation formation, and stress evolution during atomistic growth of SiC films on miscut 4H-SiC substrates

Journal of Applied Physics Kevin W. Kayang, Balaji Raghothamachar, Michael Dudley et al. Jun 28, 2026 DOI: 10.1063/5.0324186

Atomistic simulations are performed to investigate the vapor-phase deposition and growth of silicon carbide (SiC) thin films on 4H-SiC substrates with varying miscut angles and substrate temperatures. Substrate temperatures of T = 2200, 2300, and 2400 K and miscut angles of θ=0°, 2°, 4°, and 8° are considered to reveal the atomic-scale mechanisms governing crystal nucleation, polytype evolution, defect formation, and film stress. Crystal nucleation is found to initiate only after complete surface coverage by an amorphous adatom layer, followed by growth through atomic rearrangement into predominantly hexagonal (2H/4H) stacking. Local cubic stacking faults form when limited surface mobility inhibits relaxation into the hexagonal stacking sequence. The thickness of the amorphous surface layer, ranging from approximately 0.1 to 3 nm, decreases systematically with increasing substrate temperature and is strongly influenced by the substrate miscut angle. Dislocations with Burgers vectors of 1/3⟨11¯00⟩, 1/3⟨12¯10⟩, and 〈0001〉 form during growth, with their density and temporal evolution governed by the coupled effects of substrate temperature and miscut angle. Increasing substrate temperature significantly reduces dislocation density and promotes dislocation annihilation, particularly for low-miscut angle substrates. The deposited films exhibit tensile residual stresses that increase monotonically during growth, while the stress magnitude decreases by approximately 10% with each 100 K increase in substrate temperature. These results identify substrate miscut angle and temperature as key physical parameters controlling defect formation, microstructural evolution, and stress relaxation during SiC thin-film growth, providing mechanistic insight relevant for optimization of low-defect SiC films for wide-bandgap semiconductor applications.

The influence of the interfacial metal thickness of a bilayer-metal electrode on metal/insulator electron energy barriers measured using internal photoemission spectroscopy

Journal of Applied Physics Jessica Haglund, John F. Conley Jun 28, 2026 DOI: 10.1063/5.0334286

Metal/insulator interfaces impact the performance of electron devices through a variety of process dependent extrinsic effects. Bilayer-metal electrodes employing a reactive interfacial metal are often used to promote the adhesion of an overlying inert cap metal to an oxide. Bilayer-metal stacks have been proposed to decouple the influence of some extrinsic effects, such as interfacial defects from others such as strain and metal grain size, to assist in the optimization of silicon quantum bits. In this work, we used internal photoemission spectroscopy to directly measure the influence of the interfacial Ti thickness on the electron energy barrier at the Pt/Ti/Al2O3 bilayer-metal/insulator interface of Pt/Ti/Al2O3/TiN devices. We found that a 0.5 to 1.0 nm thick layer of Ti was sufficient to completely dominate the electron energy barrier. Insertion of a Ti layer also resulted in band tailing, likely due to oxygen scavenging, but had no impact on the bottom Al2O3/TiN electrode barrier.

Anisotropic transport and scaling trends of pentagonal two-dimensional NiN2 metal–oxide–semiconductor field-effect transistors

Journal of Applied Physics Justin Wong, Michael Spinazze, Youngki Yoon Jun 28, 2026 DOI: 10.1063/5.0337264

Pentagonal 2D materials have attracted significant interest for their unique physical properties and low-symmetry lattices. In this work, we investigate the transport properties of pentagonal monolayer NiN2 in sub-10 nm metal–oxide–semiconductor field-effect transistors using non-equilibrium Green’s function simulations with machine-learning tight-binding Hamiltonians. Our simulations reveal direction-dependent behavior, with devices oriented along the 45° axis exhibiting more pronounced short-channel effects than those along the 0° direction. N-type devices consistently deliver higher ON current than p-type devices due to the larger density of states near the conduction band edge, while p-type subthreshold performance degrades more significantly than n-type devices at short channel lengths due to relatively smaller hole effective mass and larger source-to-drain tunneling. Using a high-κ HfO2 gate dielectric, both n- and p-type NiN2 devices with channel lengths (Lch) of 5–10 nm meet the International Roadmap for Devices and Systems high-performance 2037 targets, while the high-density specifications are satisfied for Lch ≥ 6 and 8 nm, respectively. These findings highlight monolayer NiN2 as a promising material platform for future 2D-material electronics and offer valuable guidance for their device design.

Investigation of the environmental influence on C(V) characteristics of gallium nitride metal–insulator–semiconductor high-electron-mobility transistors

Journal of Applied Physics B. Weber, M. Dammann, P. Brückner et al. Jun 28, 2026 DOI: 10.1063/5.0325135

This study examines the impact of humidity and temperature on the reliability of silicon nitride (SiN) passivated 80 μm gallium nitride (GaN) metal–insulator–semiconductor high-electron mobility transistor (HEMT) test structures. Degradation is determined by threshold voltage shifts in the capacitance–voltage C(V) characteristics. High temperature and humidity, while maintaining a constant gate and drain bias, are deleterious to reliability, leading to pronounced positive threshold voltage shifts (ΔVth). In contrast to previous humidity studies on Schottky-gate GaN HEMTs, which reported negligible humidity-induced threshold shifts, the present work shows that GaN MISHEMTs exhibit a strong sensitivity of ΔVth to humidity. A lifetime analysis based on Peck’s model was conducted to quantify these effects, yielding a humidity acceleration factor B = 0.021 at 85 °C and an activation energy Ea = 0.45 eV in ambient air. It has been shown that increasing the relative humidity (RH) from 0% to 40% reduces the time to failure by approximately one order of magnitude. A comparison of different SiN passivation thicknesses reveals that thick gate passivation substantially mitigates humidity-induced degradation. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) analysis showed that degradation mainly occurs in the access region rather than the intrinsic region. The presence of oxidized SiN passivation and cracks was revealed by both ToF-SIMS and scanning electron microscopy/element-dispersive x-ray analysis of these regions. The epitaxial layers and the SiN passivation are identical to those of short-channel (100 nm) GaN HEMTs, meaning that these findings can be transferred.

A first-principles investigation of superconducting properties of AlCeH6

Journal of Applied Physics Zahra Alizadeh, M. R. Mohammadizadeh Jun 28, 2026 DOI: 10.1063/5.0311317

Ternary hydrides are promising candidates for low-pressure hydrogen-rich superconductors. In this work, we investigate AlCeH6 using first-principles density functional theory, including both harmonic and anharmonic phonon calculations. The compound crystallizes in a rhombohedral R3¯m structure composed of corner-sharing [AlH6] octahedra that form an extended hydrogenic framework, with Ce atoms occupying interstitial sites between the octahedra. Electronic structure analysis reveals metallicity with Ce bands near the Fermi level, suggesting a multiband character. Phonon calculations indicate a low-frequency Ce mode stabilized by anharmonic effects, while high-frequency H modes remain largely unchanged. Electron–phonon coupling is dominated by hydrogen vibrations, contributing over 60% of the total λ. The estimated superconducting transition temperatures are Tc = 53−42 K in harmonic and 43–34 K in anharmonic corrections for μ* = 0.10−0.13, with BCS ratios close to the weak-coupling limit, indicating moderate coupling. These results demonstrate that AlCeH6 is a dynamically stable, hydrogen-rich superconductor at ambient pressure and highlight the potential of compositional tuning in ternary hydrides to achieve low-pressure superconductivity.

Response to Comment on “Reduction of magnetic-field-induced shift in quantum frequency standards based on coherent population trapping” [J. Appl. Phys. 137, 164402 (2025)]

Journal of Applied Physics V. I. Vishnyakov, D. V. Brazhnikov, M. N. Skvortsov Jun 28, 2026 DOI: 10.1063/5.0328065

Dr. Tsygankov commented (see the preceding Comment) on our work Vishnyakov et al. [J. Appl. Phys. 137, 164402 (2025)], expressing disagreement with our physical interpretation of the multi-peak structure of the coherent population trapping (CPT) resonance, which can be observed under the Pound–Drever–Hall-like (PDH) regime of excitation. Below, we provide a brief response to the Comment, from which it follows that our physical interpretation remains unchanged.

Voltage polarity-dependent anomalous Hall effect modulation in Fe5GeTe2 via ion gel gating

Journal of Applied Physics Ziyan Luo, Qianni Yang, Jinmin Ding et al. Jun 28, 2026 DOI: 10.1063/5.0335790

Energy-efficient electric-field control of magnetism is critical for low-power spintronic devices and next-generation magnetic storage. Herein, we systematically investigate the anomalous Hall effect in the itinerant van der Waals (vdW) ferromagnet Fe5GeTe2 modulated by an 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ion gel gate. Magnetotransport measurements reveal a giant, polarity-dependent modulation: a positive gate bias induces a ∼312% enhancement in the ordinary Hall coefficient (R0) and a ∼195% increase in the anomalous Hall coefficient (RS) at 200 K, whereas negative bias results in a modest change (<30%). Thickness-dependent studies demonstrate that the gating effect is confined to surface layers, excluding bulk ion intercalation effect. The irreversible, non-volatile modulation behavior—supported by steady gate leakage current—suggests a synergistic mechanism where proposed interfacial electrochemical reactions coexist with electrostatic effects, collectively driving the giant and non-volatile transport response. Our findings clarify the gating mechanism of large organic ions in two-dimensional vdW magnets and establish a robust pathway toward non-volatile Write-Once-Read-Many spintronic memory devices.