Advanced Materials
Articles in this Issue
Electrochemical Chlorine Shuttle from PVC Waste to Vinyl Ether Acceptors for the Synthesis of Biodegradable Polyester Precursors
Abstract Poly(vinyl chloride) (PVC) remains one of the most widely produced polymers globally but poses significant environmental and energetic challenges due to...
Remarkably Enhancing H <sub>2</sub> O <sub>2</sub> Photogeneration by Modulating Pore‐Microenvironment of a Photoactive Covalent Organic Framework
Abstract While research mainly focuses on enhancing photoelectric properties to improve photocatalytic efficiency, the influence of mass transfer has not yet bee...
Regulation of Proton Vehicle Migration for Synergetic Interfacial Stability Enables Long‐Lasting Ah‐Level Zinc‐Ion Batteries
Abstract The practical implementation of aqueous zinc‐ion batteries (AZIBs) is critically constrained by interfacial instabilities caused by parasitic hydrogen e...
Tandem Conversion of Polysulfides via Coupling Ni Single–Atoms and Clusters for Na–S Batteries
Abstract Lithium ion batteries have been trialed for grid−oriented energy storage, yet their large−scale implementation is theoretically limited by the global lithium resource reserv...
Micelle‐Like Electrolyte Design for 4.6 V Li||NCM811 Cells Workable at 70 °C
Abstract Localized high‐concentration electrolytes (LHCE) feature satisfactory anode compatibility for lithium (Li)‐metal batteries (LMBs). However, their applic...
In Situ Self‐Adaptive Structure Evolution Under Volume Fluctuation Toward High‐Performance Silicon‐Based Anode
Abstract Alloy‐type anodes have become the most promising candidates for the next‐generation energy‐dense lithium‐ion batteries, but structural collapse caused b...
Modular Design of Hydrogel Adhesives for Enhanced Tissue Healing
Abstract Hydrogel adhesives exhibit significant potential in various biomedical fields such as wound hemostasis and healing. However, there is a lack of general strategies for prepar...
Dynamic Ni–O Bonding Induced by Orbital Degeneracy Breaking for Efficient Li <sub>2</sub> CO <sub>3</sub> Decomposition
Abstract Lithium carbonate, the primary discharge product in Li–CO 2 batteries with high thermodynamic stability and a wi...
Dual‐Sulfite Electrolytes for Stable Sodium Metal Batteries with a Low N/P Ratio
Abstract Grasping the intricacies of the solid electrolyte interphase (SEI) on sodium (Na) metal anodes is critical for developing sodium metal batteries (SMBs)....
Design of Thermoelectric Materials and Modules for Power Generation Below 300 °C and Cooling Applications Near Room Temperature
Abstract The discovery of Bi 2 Te 3 semiconducting alloys in the 1950s catalyzed...
Pathology‐Driven Design of a Biomimetic Ferromagnetic Nanomedicine for Dual‐Mode Treatment of Ulcerative Colitis and Colitis‐Associated Colorectal Cancer
Abstract The pathological features of ulcerative colitis (UC) involve systemic abnormalities, including immune dysregulation, iron deficiency, and microbiota imb...
Neutrophil/Leukemia‐Tropic Dual‐Drug Nanomedicine Potentiates the Treatment of Acute Myeloid Leukemia
Abstract Acute myeloid leukemia (AML) poses severe clinical challenges due to its heterogeneity and the scattered nature of therapeutic targets. Moreover, suboptimal drug delivery to...
Liquid‐Crystalline Biomineral Nanofibers: 1D Inorganic Materials with a High Aspect Ratio and Anisotropic Self‐Assembled Nanocomposites
Abstract In nature, shark tooth enameloid exhibits an intricate anisotropic structure composed of high‐aspect‐ratio fluorapatite (FAp) fibrous nanocrystals, which impart exceptional...
Facilitating Electrochemical Overall Water Splitting Through Tailoring Halloysite Nanoclay‐Based Nanoarchitectonics of Ionic Environment and Gas‐Bubble Wettability
Abstract Unwanted gas bubble adhesion at the electrode surface and its unfavorable microenvironment compromise water splitting performance by perturbing the acce...
2D Indium Oxide at the Epitaxial Graphene/SIC Interface: Synthesis, Structure, Properties, and Devices
Abstract Scaled and high‐quality insulators are crucial for fabricating 2D/3D hybrid vertical electronic devices such as metal‐oxide‐semiconductor (MOS) based Sc...
Quasi‐2D Morphologies of a Non‐Fullerene Acceptor Y6 by Interfacial Assembly via Langmuir–Schaefer Technique
Abstract Supramolecular organization governs the structure and optoelectronic properties of organic thin films. This study shows that films based on the non‐fullerene acceptor Y6 can...
Temperature Invariant, Nearly Zero Temperature Coefficient of Resistivity in Si‐Doped Titanium Nitrides
Abstract Materials with near‐zero temperature coefficient of resistivity (nz‐TCR) are critical for precision electronics operating across wide temperature ranges...
Potassium Coordination Stabilized Ru <sup>δ+</sup> State on Potassium Titanate Nanowire for Efficient Photothermal CO <sub>2</sub> Methanation
Abstract Photothermal CO 2 methanation offers a solution to achieve both the decarbonization targets and the substitution...
Elucidating the Donor/Acceptor Regulatory Mechanism for CO <sub>2</sub> Electroreduction
Abstract Catalysts with Cu─N x active sites have shown promising performance...
3D Printing High‐Performance Piezoelectric Ceramic with Complex Structure for Ultrasonic Array Transducer
Abstract 3D printing has demonstrated irreplaceable advantages on rapid prototyping and flexible shaping of piezoelectric ceramic fabrication. However, several f...
Lighting Up the Non‐conjugated Polymers in Full Color via Domino‐Effect Triggered Emission
Abstract Non‐conjugated polymers are typically non‐emissive due to their wide energy gaps and limited light absorption. However, activating non‐conjugated (bio)polymers with tunable...
A Zinc Ion Capacitor‐Based Fluidic Memristor
Abstract The intersection of electrochemistry and neuroscience offers profound insights into ionotronic systems. Here, a zinc‐ion capacitor‐based fluidic memristor (ZIC‐FM) is presen...
Tannin‐Mediated Ischemia‐Homing‐Angiogenesis Nanodots (IHAND) for Synergistic Angiogenesis and Heart Failure Prevention Post‐Myocardial Infarction
Abstract Insufficient angiogenic response in the early stage of myocardial infarction (MI) mediates the progression from MI to heart failure. The angiogenic response mainly involves...
Stimuli‐Responsive Static Multimodal and Temporal Multicolor Luminescence Modulation in Lanthanide(III)/Manganese(II) Co‐Doped Cs <sub>2</sub> NaLuCl <sub>6</sub> Perovskites
Abstract Stimuli‐responsive materials that react to various external triggers are in high demand for advanced interactive photonic applications. Despite progress...
Solution Plasma Synthesis of High‐Entropy Alloy Nanoparticles with Self‐Limiting Oxidation for Photothermal CO <sub>2</sub> Reduction
Abstract Transition metal high‐entropy alloys (HEAs) demonstrate exceptional catalytic performance due to their structural complexity, featuring rich local atomi...