Browse Articles
Discover research articles across all indexed journals
Increased critical current density in iron selenide telluride crystals doping with trace amount of cobalt
Iron selenide telluride superconductors, succeeding copper oxide superconductors, have refuted the long-standing belief that superconductors are incompatible with ferromagnetic elements. Moreover, their pronounced sensitivity to chemical doping offers a distinct advantage for the investigation of superconductivity mechanisms, thereby enriching the academic discourse in the field. This study employed a self-flux method to synthesize CoxFe1−xSe0.4Te0.6 crystals with trace cobalt (Co) doping at levels below 1%. Extensive structural elucidation and low-temperature physical property assessments have been conducted on the doped crystals, providing a detailed understanding of their material properties and behavior under cryogenic conditions. Our findings revealed that trace Co doping enhances the critical current density under high magnetic fields. Utilizing the Dew-Hughes model, we quantitatively assessed the pinning force and determined that Co doping effectively modulates it, corroborating the observed enhancement in critical current density. These insights advance our understanding of the role of dopants in iron-based superconductors and offer significant theoretical underpinnings for the development of high-performance iron-based superconducting materials.
Breaking the mold: Overcoming the time constraints of molecular dynamics on general-purpose hardware
The evolution of molecular dynamics (MD) simulations has been intimately linked to that of computing hardware. For decades following the creation of MD, simulations have improved with computing power along the three principal dimensions of accuracy, atom count (spatial scale), and duration (temporal scale). Since the mid-2000s, computer platforms have, however, failed to provide strong scaling for MD, as scale-out central processing unit (CPU) and graphics processing unit (GPU) platforms that provide substantial increases to spatial scale do not lead to proportional increases in temporal scale. Important scientific problems therefore remained inaccessible to direct simulation, prompting the development of increasingly sophisticated algorithms that present significant complexity, accuracy, and efficiency challenges. While bespoke MD-only hardware solutions have provided a path to longer timescales for specific physical systems, their impact on the broader community has been mitigated by their limited adaptability to new methods and potentials. In this work, we show that a novel computing architecture, the Cerebras wafer scale engine, completely alters the scaling path by delivering unprecedentedly high simulation rates up to 1.144 M steps/s for 200 000 atoms whose interactions are described by an embedded atom method potential. This enables direct simulations of the evolution of materials using general-purpose programmable hardware over millisecond timescales, dramatically increasing the space of direct MD simulations that can be carried out. In this paper, we provide an overview of advances in MD over the last 60 years and present our recent result in the context of historical MD performance trends.
Effect of layering characteristics on compressive mechanical properties and damage mechanisms of rocks: Experiments and models
The investigation of layered rock mechanical properties is important for rock stability analysis. To examine the effects of layer inclination angle (LIA) and layer thickness (LT) on the compressive mechanical properties and damage mechanism of layered rock, this paper proposes a new method of preparing layered rock specimens using similar materials and conducting uniaxial compression tests. At the same time, PFC2D numerical analysis software is used to establish the discrete element numerical model of layered rock under uniaxial compression to deepen its microscopic damage mechanism. The results show that the LIA significantly affects the anisotropic mechanical properties of the rock, and the different LIA lead to significant differences in the crack extension paths and failure modes, which can be summarized into four types of cracks and four failure modes. The increase in LT under the effect of different LIA shows different mechanisms of action, which is enhanced in 0° and 90°, weakened in 45° and 75°, and insignificant in 15°, 30° and 60°. In addition, the expansion of micro-cracks in layered rocks are all dominated by interlayer shear cracks first, and then conduct to the rock portion to tensile cracks. The findings of this research offer valuable insights for stability assessment and design of layered rock structures in engineering applications.
Insights into metabolic changes during epidermal differentiation as revealed by multiphoton microscopy with fluorescence lifetime imaging
Abstract Rapid developments in the field of organotypic cultures have generated a growing need for effective and non-invasive methods for quality control during tissue development. In this study, we correlate metabolic changes with epidermal differentiation and demonstrate that multiphoton microscopy with fluorescence lifetime imaging (MPM-FLIM) can be applied to monitor epidermal differentiation of keratinocytes with respect to proliferative and differentiated states. In a 2D keratinocyte tissue culture model, increased expression of differentiation markers keratin-1 and keratin-10 was induced with calcium supplementation. An accompanying shift from glycolysis to mitochondrial respiration was detected in metabolic flux assays. Analysis of MPM-FLIM images acquired at 750 nm and 900 nm excitation revealed a decreased relative fraction of intracellular NADH and FAD after high calcium treatment, consistent with increased oxidative phosphorylation. Epidermal differentiation could be monitored over a 96 h period. Discrimination analysis based on k-means clustering generated clusters that correlated well with the duration of high Ca2+ treatment, suggesting that MPM-FLIM can provide useful parameters for monitoring keratinocyte differentiation.
Environment-limited transfer of angular momentum in Bose liquids
Impurity motion in a many-body environment has been a central issue in the field of low-temperature physics for decades. In bosonic quantum fluids, the onset of a drag force experienced by point-like objects is due to collective environment excitations, driven by the exchange of linear momentum between the impurity and the many-body bath. In this work we consider a rotating impurity, with the aim of exploring how angular momentum is exchanged with the surrounding bosonic environment. In order to elucidate these issues, we employ a quasiparticle approach based on the angulon theory, which allows us to effectively deal with the non-trivial algebra of quantized angular momentum in the presence of a many-body environment. We uncover how impurity dressing by environmental excitations can establish an exchange channel, whose effectiveness crucially depends on the initial state of the impurity. Remarkably, we find that there is a critical value of initial angular momentum, above which this channel effectively freezes.
Impact of digital health on the quality of primary care for people with chronic noncommunicable diseases: A scoping review protocol
Background Chronic Non-Communicable Diseases (NCDs) represent a significant global challenge, especially in low- and middle-income countries. The introduction of digital health in Primary Health Care (PHC) has the potential to improve the quality of care for people with NCDs by offering tools such as telemedicine, mobile applications and other information and communication technologies. The aim of this study is to identify and map global experiences of using Information and Communication Technologies (ICTs) in primary care for non-communicable diseases and assess their impact on the quality of care in PHC. Methods This study presents a scoping review protocol based on the Joanna Briggs Institute criteria and the PRISMA-ScR guidelines. The review will be carried out in nine stages, including defining the aim and research questions, developing inclusion and exclusion criteria, and searching, selecting, extracting and analyzing the evidence. The databases consulted include MEDLINE/PubMed, JBI Evidence Synthesis and Open Science Framework. Results The review will identify and map global experiences in the use of ICTs in primary care for NCDs and assess their impact on the quality of care in PHC. It is hoped to find studies that address the use of digital technologies for early detection, management and follow-up of NCDs, as well as their integration with traditional health systems. Conclusions The integration of digital technologies into PHC has the potential to improve the quality of care, but it can also accentuate inequities. It is necessary to consider digital health literacy, access to tools, and legal and ethical aspects of data protection. The review will highlight the need for robust policies and adequate infrastructure to support the effective implementation of digital health in PHC.
An in-vitro assessment of the irrigants and irrigation protocols effect on the ProRoot MTA marginal leakage in the furcal perforations
Resolving dispersive diffusion in layered perovskites with photocurrent-detected transient gratings
Coexistence of excitons and free charge carriers can complicate conventional spectroscopic studies of transport mechanisms in layered perovskite solar cells. Because of their large concentrations and absorbance cross sections, excitons tend to dominate spectroscopic signals and obscure observations of free charges in this class of systems. To investigate the effects of interstitial organic molecules on charge transport in photovoltaic devices, we apply a newly developed four-pulse transient grating method with photocurrent detection to layered perovskites possessing a range of quantum well thicknesses. In this method, a phase-stabilized “pump” pulse-pair photoexcites a carrier density grating in the active layer of a photovoltaic cell, whereas transport is time-resolved using the carrier density grating generated by a subsequent “probe” pulse-pair. Carrier diffusion mechanisms are revealed by measuring the recombination-induced nonlinear response of the device while varying the delay between pulse-pairs and phase difference between density gratings. Like drift velocity dispersion, our data suggest that encounters with inorganic–organic interfaces broaden the range of diffusivities in addition to skewing the distributions toward slower transit times. Rather than tunneling through the potential energy barriers associated with the organic material, the experimental measurements support a physical picture in which the photoexcited carriers traverse circuitous paths through the active layer while occupying the phases of the thickest quantum wells.
Comparative efficacy of different antihypertensive drug classes for stroke prevention: A network meta-analysis of randomized controlled trials
Objective The study aimed to compare the effectiveness of various antihypertensive drugs in preventing strokes in hypertensive patients. Methods We conducted a comprehensive search of PubMed, Embase, the Cochrane Library, and ClinicalTrials.gov to identify randomized controlled trials (RCTs) investigating the efficacy of antihypertensive drugs in stroke prevention from inception until April 2023. A network meta-analysis in a Bayesian framework was performed using the random-effects model. Results This study included 88 RCTs involving 487,076 patients to investigate the effects of antihypertensive drugs in preventing stroke. Among these trials, 58 RCTs specifically focused on comparing the impact of such drugs on hypertensive subjects. In overall population, Angiotensin-converting enzyme inhibitor (ACEIs), Angiotensin receptor blockers (ARBs), Calcium channel blockers (CCBs), and Diuretics (DIs) demonstrated superiority over placebo in in reducing stroke, all-cause mortality, and cardiovascular mortality. CCBs and DIs outperformed β adrenergic receptor blockers (BBs), ACEIs, and ARBs in stroke reduction. However, when focusing on hypertensive patients, ACEIs, CCBs, and DIs proved superior to placebo in reducing stroke, all-cause mortality, and cardiovascular mortality. ARBs reduced stroke and all-cause mortality but lacked efficacy in reducing cardiovascular mortality. Of the various CCB subclasses, only the Dihydropyridines displayed efficacy in preventing stroke, all-cause mortality, and cardiovascular mortality. Among diuretic subclasses, thiazide-type DIs exhibited no efficacy in preventing all-cause mortality. ACEIs+CCBs were more effective than ACEIs or ARBs monotherapy in reducing stroke, more effective than ACEIs, ARBs, CCBs, or DIs monotherapy in reducing all-cause mortality, and more effective than ARBs in reducing cardiovascular mortality. Conclusion These findings suggest that ACEIs, dihydropyridine CCBs, and thiazide-like diuretics may provide superior prevention against stroke, all-cause mortality, and cardiovascular mortality in hypertensive patients. Combinations of ACEIs and CCBs may provide enhanced protection of stroke than ACEIs or ARBs monotherapy.
Exploring the efficiency of chemically activated palm frond carbon in heavy metal adsorption a modeling approach
Abstract The industry’s unregulated discharge of unprocessed trash is a major contributor to environmental contamination. Drinking water contaminated by heavy metals is a serious environmental and public health problem. Cadmium (Cd (II)) is one heavy metal frequently found in wastewater. Adsorption is the most widely used method for treating water contaminated with heavy metals due to its great performance, affordability, and ease of use. This work examined the potential for heavy metal adsorption in palm fronds, a chemically treated agricultural waste, using H3PO4-derived activated Carbon (also known as chemically treated Carbon from palm fronds, or CTCPFs) for Cd(II) adsorption. Extensive batch tests investigated the effects of pH, initial metal concentration, dosage of CTCPFs, and contract duration on adsorption at room Temperature (25 ± 1 °C). Using BET techniques, the surface area and porosity of the sample were measured, and the surface morphology was examined using SEM. FT-IR and XRD measurements were made. After 90 min, 99.65% of the Cd (II) had been removed. Cd (II) was efficiently adsorbed by CTCPFs (> 99%) at pH = 5,C0 = 50 mg/l, CTCPFs dosage 1 g /250 ml at 45 ℃ and contact time 90 min. According to the findings, CTCPFs are a cost-effective, efficient, and environmentally friendly adsorbent that can treat heavy metal-contaminated industrial wastewater as impure water. They also show promise in removing Cd (II) under neutral conditions.
Transient Raman observation and bond properties of a mixed dihalide radical anion in water
An elusive short-lived mixed dihalide radical anion (BrCl·−), produced in water by radiation-induced reactions, has been observed and analyzed by time-resolved resonance Raman spectroscopy (TRRR) and density functional theory. The Raman spectrum of the radical consists of a prominently enhanced stretching vibration, represented by a band at 212 cm−1 and its overtones. Calculations by range-separated hybrid density functionals (ωB97x and LC-ωPBE) reproduce the experimental vibrational frequency well, with a corresponding bond length of 2.713 (±0.028) Å. A first order anharmonicity of ∼1.42 cm−1 determined for the Br–Cl stretching mode in the radical suggests a convergence of vibrational states at an energy of ∼1.01 eV, using the Birge–Sponer extrapolation. This value, estimated for the radical confined in the solvent cage, compares fairly well with the calculated gas-phase energy, 1.06 eV, required for the radical to dissociate into Br· and Cl− fragments. The Raman detection of a closely related radical, ICl·−, in water was unsuccessful. The reaction pathways and equilibria have been analyzed to discuss the observability of mixed dihalide and analogous radical species.
Post-exercise differential response of central and brachial blood pressure in patients with coronary artery disease: A randomized crossover trial
The post-exercise hypotension response is controversial among patients with coronary artery disease (CAD). Factors behind this disparity may include post-exercise differential effects on central and brachial blood pressure (BP), exercise intensity and inter-individual variability. Thus, we investigate group and individual central and brachial BP responses 5, 15 and 30-min after combined exercise of different intensities in participants with and without CAD. Seventeen participants with stable CAD and eighteen aged-matched controls (52–81 years) completed an acute bout of high and moderate-intensity combined exercise. Brachial and central systolic (cSBP) pressures were assessed via oscillometry and carotid tonometry, respectively. Central pulse wave velocity was also measured. Group mean changes were examined with linear mixed models, and bSBP and cSBP post-exercise individual responsiveness quantified via the region of practical equivalence and highest density interval, a Bayesian decision rule. Regardless of exercise intensity, cSBP was persistently increased during recovery in participants with CAD (difference 30 –baseline (d30-bas) = 10, 95% CI: 4 to 17 mmHg, p = 0.001) but reduced in controls (d30-bas = -13, 95% CI: -19 to -7 mmHg, p = 0.003). bSBP was unchanged in both groups (CAD: d30-bas = 1, 95% CI: -3 to 6 mmHg, p = 0.995, control: d30-bas = -4, 95% CI: -2 to 8 mmHg, p = 0.999). Most participants with CAD exhibited sustained elevations in cSBP (n = 10), while most controls were post-exercise hypertensive responders (n = 11) with changes >|5| mmHg. We found differential post-exercise effects on central and brachial BP independent from combined exercise intensity but not clinical population. Clinical trials.gov registration ID: NCT06617117
Novel strategy for whole-genome sequencing of hepatitis A virus using NGS illumina technology and phylogenetic comparison with partial VP1/2A genomic region
Selective adsorption mechanism of a new combined collector on the surfaces of quartz and potassium feldspar
This study presents a novel methodology for the separation of quartz and feldspar under neutral and weakly alkaline conditions. Ethyl-bis(dodecyl dimethyl ammonium bromide) (Gemini) is introduced as a new collector in the flotation process, combined with sodium oleate (NaOL) to enhance separation efficiency. The investigation focuses on the adsorption mechanism of these combined collectors on mineral surfaces. While the individual collectors, Gemini and NaOL, were ineffective in differentiating between quartz and feldspar, their combination resulted in significantly improved separation outcomes. Flotation tests indicated that at a pulp pH of 7, with Gemini and NaOL at concentrations of 12 × 10−5 mol l−1 and molar ratios of 1:1 and 1:2, the flotation recovery of quartz was 46.51% and 40.57% higher than that of potassium feldspar, respectively. Zeta potential measurements, Fourier transform infrared spectroscopy, x-ray photoelectron spectroscopy analyses, and molecular dynamics simulations demonstrate that the Gemini collector predominantly influences the flotation performance of quartz and feldspar. NaOL molecules do not directly adsorb onto the quartz surface; instead, they co-adsorb via electrostatic interactions with Gemini, which minimally affects the interaction dynamics. In contrast, NaOL preferentially adsorbs onto the aluminum, silicon, and other reactive sites on the feldspar surface through its –COO functional group, leading to competitive adsorption with Gemini and consequently diminishing Gemini’s effectiveness on feldspar. This study elucidates the selective separation mechanism of quartz and feldspar using Gemini and NaOL and aims to provide insights into employing combined collectors in diverse separation scenarios to enhance quartz quality.
Compliance with smoke-free laws in hospitality venues in Ethiopia: A cross-sectional observational study in 10 cities
Background The 2019 Ethiopia’s comprehensive tobacco control proclamation mandates 100% smoke-free public places and workplaces. Despite the proclamation, compliance remains uncertain, particularly at hospitality venues (HVs). The aim of this study was to evaluate the extent of compliance with smoke-free laws in HVs and to also understand the factors associated with non-compliance. Methods This cross-sectional observational study was conducted in 10 cities in Ethiopia—Addis Ababa, Adama, Assosa, Bahir Dar, Dire Dawa, Gambella, Harar, Hawassa, Jigjiga, and Semera-Logia -between December 5th and 28th, 2022. Data were collected electronically using smartphones, utilizing a pre-tested, standardized checklist and covert observation. The subjects were selected through multi-stage cluster sampling. A total of 1,370 HVs (hotels, restaurants, bars, bars and restaurants, café and restaurants, butcher houses and restaurants, groceries, and nightclubs/ lounges) were observed. Specific and composite compliance indicators were computed for indoor and outdoor spaces. Poisson regression analyses identified factors associated with indoor active smoking and non-compliance. Statistical significance was set at P<0.05. Data were analyzed using SPSS version 26. Results Among the 1,370 HVs included in this study, 1,368 had indoor spaces, 327 had both indoor and outdoor spaces, and two had only outdoor spaces. Active smoking was observed in 32.2% (95% CI:30–35) of indoor HVs, with the highest rates in nightclubs/lounges (68.6%) and bars (65.7%). Semera-Logia reported the highest prevalence of active smoking (70.4%). Adherence with ‘no smoking’ signage was low (35.2%), while ashtrays, lighters, and designated smoking areas (DSAs) were rarely present. Outdoor active smoking was observed in 46.5% (95% CI:41–52) of HVs. Only 12.8% of indoor spaces were fully adherent to the smoke-free law requirements. Venues in Semera-Logia were over twice as likely to have active smoking (adjusted prevalence ratio [aPR]: 2.71; 95% CI: 2.00–3.66) compared to Addis Ababa. Bars and nightclubs/lounges had significantly higher prevalence of active smoking than cafés/restaurants. ‘No smoking’ signs were associated with reduced prevalence of indoor active smoking (aPR: 0.77; 95% CI: 0.67–0.89), while smoking within a 10-meter range (aPR: 2.67; 95% CI: 2.13–3.32), the presence of lighters (aPR: 1.69; 95% CI: 1.41–2.02), and the sale of tobacco products (aPR: 1.58; 95% CI: 1.34–1.86) were all associated with higher prevalence of indoor active smoking. Conclusion Compliance with ‘no active smoking’ and adherence to smoke-free laws in HVs remain low, particularly in bars, nightclubs/lounges, and Semera-Logia, with high rates of active smoking both indoors and outdoors. Enhanced enforcement and targeted are needed to educate the public and HV owners about the risks of SHS and the importance of tobacco control laws.
Within-project and cross-project defect prediction based on model averaging
Multi-center decomposition of molecular densities: A numerical perspective
In this study, we analyze various Iterative Stockholder Analysis (ISA) methods for molecular density partitioning, focusing on the numerical performance of the recently proposed Linear approximation of Iterative Stockholder Analysis (LISA) model [Benda et al., J. Chem. Phys. 156, 164107 (2022)]. We first provide a systematic derivation of various iterative solvers to find the unique LISA solution. In a subsequent systematic numerical study, we evaluate their performance on 48 organic and inorganic, neutral and charged molecules and also compare LISA to two other well-known ISA variants: the Gaussian iterative stockholder analysis and Minimum Basis Iterative Stockholder analysis (MBIS). The study reveals that LISA-family methods can offer a numerically more efficient approach with better accuracy compared to the two comparative methods. Moreover, the well-known issue with the MBIS method, where atomic charges obtained for negatively charged molecules are anomalously negative, is not observed in LISA-family methods. Despite the fact that LISA occasionally exhibits elevated entropy as a consequence of the absence of more diffuse basis functions, this issue can be readily mitigated by incorporating additional or integrating supplementary basis functions within the LISA framework. This research provides the foundation for future studies on the efficiency and chemical accuracy of molecular density partitioning schemes.
Isolation and characterization of 24 phages infecting the plant growth-promoting rhizobacterium Klebsiella sp. M5al
Bacteriophages largely impact bacterial communities via lysis, gene transfer, and metabolic reprogramming and thus are increasingly thought to alter nutrient and energy cycling across many of Earth’s ecosystems. However, there are few model systems to mechanistically and quantitatively study phage-bacteria interactions, especially in soil systems. Here, we isolated, sequenced, and genomically characterized 24 novel phages infecting Klebsiella sp. M5al, a plant growth-promoting, nonencapsulated rhizosphere-associated bacterium, and compared many of their features against all 565 sequenced, dsDNA Klebsiella phage genomes. Taxonomic analyses revealed that these Klebsiella phages belong to three known phage families (Autographiviridae, Drexlerviridae, and Straboviridae) and two newly proposed phage families (Candidatus Mavericviridae and Ca. Rivulusviridae). At the phage family level, we found that core genes were often phage-centric proteins, such as structural proteins for the phage head and tail and DNA packaging proteins. In contrast, genes involved in transcription, translation, or hypothetical proteins were commonly not shared or flexible genes. Ecologically, we assessed the phages’ ubiquity in recent large-scale metagenomic datasets, which revealed they were not widespread, as well as a possible direct role in reprogramming specific metabolisms during infection by screening their genomes for phage-encoded auxiliary metabolic genes (AMGs). Even though AMGs are common in the environmental literature, only one of our phage families, Straboviridae, contained AMGs, and the types of AMGs were correlated at the genus level. Host range phenotyping revealed the phages had a wide range of infectivity, infecting between 1–14 of our 22 bacterial strain panel that included pathogenic Klebsiella and Raoultella strains. This indicates that not all capsule-independent Klebsiella phages have broad host ranges. Together, these isolates, with corresponding genome, AMG, and host range analyses, help build the Klebsiella model system for studying phage-host interactions of rhizosphere-associated bacteria.
Leuconostoc lactis strain APC 3969 produces a new variant of cyclic bacteriocin leucocyclicin Q and displays potent anti-Clostridium perfringens activity
Adsorption of methanol on cationic cobalt clusters in the gas phase
Knowledge about the adsorption and activation of methanol on metal catalysts is essential to obtain insights into the conversion of methanol to sustainable chemicals. In this work, the adsorption of methanol on Con+ (n = 1–60) clusters is investigated using low-pressure collision cell experiments in combination with time-of-flight mass spectrometry. Experiments are conducted using both methanol and deuterated methanol in order to examine potential isotope effects and to gain insights into the reaction mechanism. Kinetic data and Rice–Ramsperger–Kassel–Marcus calculations indicate the absence of methanol desorption for n &lt; 10 cluster sizes, suggesting dissociative chemisorption of methanol for those sizes. For larger clusters, the reaction involves a combination of association and desorption, with a pronounced size dependence of the corresponding reaction rates. This size dependence is anti-correlated with the promotion energy of an electron from an occupied frontier orbital to the lowest unoccupied d-state.