Browse Articles
Discover research articles across all indexed journals
An effective strategy to search for 2D piezoelectric materials
Two-dimensional (2D) piezoelectric materials have a great potential for device applications by utilizing their remarkable electromechanical coupling. In this study, we propose a sure independence screening and sparsifying operator algorithm to search for 2D piezoelectric materials, which is culminating in the identification of a novel 2H-MoS2-like crystalline structure. Utilizing first-principles calculations grounded in density-functional theory, we systematically conducted a thorough analysis of their mechanical properties, electronic properties, and piezoelectric responses. The results indicate that 2H-MoS2-like crystalline structures exhibit the most superior piezoelectric characteristics and have an e11 coefficient of up to 5.09 and a d11 coefficient reaching 10.87, showing remarkable piezoelectric performance. Employing Kendall correlation analysis and polynomial regression, we analyzed the relations between physical parameters and piezoelectric properties, yielding empirical equation that encapsulate the piezoelectric nature of this new class of materials, which mostly related to their lattice structures and bandgaps. Then, we investigated the stress, system energy, and piezoelectric response of these materials under various strain conditions, a d11 coefficient reaching 12.07 for WMo3Se8. Our work may broaden the horizon of low-dimensional piezoelectric materials, offering a pathway to tailor materials with desired properties through our proposed effective strategy.
Anisotropy visualisation from X-ray diffraction of biological apatite in mixed phase calcified tissue samples
Abstract X-ray diffraction is widely used to characterise the mineral component of calcified tissue. Broadening of the diffraction peaks yields valuable information on the size of coherently diffracting domains, sometimes loosely described as crystallite size or crystallinity. These domains are markedly anisotropic, hence a single number describing their size is misleading. We present a novel variation on a method for visualising crystallographic anisotropy in X-ray diffraction data. This provides an intuitively interpretable depiction of crystalline domain size and anisotropy. The new method involves creating a polar plot of calculated domain thickness for peaks in a diffractogram versus crystallographic direction. Points with the least error are emphasised. Anisotropic domain dimensions are calculated by refining an ellipsoidal model in a whole pattern fit. These dimensions are then used to overlay an ellipse on the peak broadening plot. This is illustrated by application of the method to calcifications in breast tissue with suspected cancer, which frequently contain whitlockite as well as nanocrystalline apatite. Like most biogenic apatite, this exhibits markedly anisotropic peak broadening. The nature of this anisotropy offers potentially useful information on normal function and pathology of calcified tissue and is a frequently neglected crystallographic feature of these materials.
Two-step growth of crack-free 5 <i>μ</i>m-thick Al0.2Ga0.8N on sapphire substrate with sputtered AlN nucleation layer
For AlGaN-based near ultraviolet laser diodes (UVA LDs) with emission wavelength below 365 nm, there is no such suitable substrate for homoepitaxy to the required AlGaN films. In this study, we proposed a two-step growth (TSG) method of thick Al0.2Ga0.8N layer grown on the sapphire substrate with a sputtered AlN nucleation layer. The influence of growth rate and V/III ratio on the growth mode of an AlGaN layer has been studied in detail. It is found that AlGaN films exhibit larger island size and lower island density with low growth rate and low V/III ratio during the 3D growth stage, which can effectively relax the compressive stress and suppress the dislocation formation of the subsequent thick AlGaN layer. Therefore, a crack-free high-quality 5 μm-thick Al0.2Ga0.8N layer with 85% biaxial relaxation is grown on a sapphire substrate by using the TSG method, revealing the threading dislocation density decreases from 1.2 × 1010 to 6.6 × 108 cm−2. This work paves the way for the realization and improvement of high-performance AlGaN-based UVA emitters.
Establishing the effect of computed tomography reconstruction kernels on the measure of bone mineral density in opportunistic osteoporosis screening
Tunable magnetic phase transition and room temperature magnetocaloric effect in La0.67Ba0.33MnO3 nanoparticles
Critical behaviors and the magnetic properties have been investigated in La0.67Ba0.33MnO3 nanoparticles systematically. We found tunable critical behaviors in a ferromagnetic–paramagnetic (FM–PM) transition. Thermal fluctuation induced finite-size effects in the nanoscale thermodynamic systems result in suppression of FM–PM critical transition temperature (TC) and broadening of singularities due to finite-size thermal fluctuation in the nanoscale thermodynamic system. By fitting the critical behaviors with the particle sizes, we confirmed the finite size induced decreasing of TC in La0.67Ba0.33MnO3. Room temperature magnetocaloric effects with enhanced refrigeration efficiency have been found in the La0.67Ba0.33MnO3 nanoparticle systems. A relative cooling power of 205 J/kg is found around room temperature. The broadening of the critical transition and shift of critical temperature in the nanoparticles made them excellent magnetic refrigeration materials near room temperature.
Pure data correction enhancing remote sensing image classification with a lightweight ensemble model
Mapping the structural–mechanical landscape of amorphous carbon with ReaxFF molecular dynamics
We use ReaxFF molecular dynamics (MD) to investigate the relationship between structural and mechanical properties in bulk and nanostructured amorphous carbon (a-C). The liquid-quench MD method is used to generate isotropic bulk samples with mass densities ranging from 0.96 to 3.29 g/cm3. Structural analysis identifies two types of structures with distinct short- and medium-range order: lower-density sp2-dominated a-C, which is characterized by a bimodal ring-size distribution, and higher-density sp3-dominated tetrahedral amorphous carbon (ta-C), exhibiting a unimodal ring-size distribution. Stress–strain MD simulations and analysis reveal how an atomistic structure impacts elastic properties and post-yield atomic rearrangements. All stretched structures demonstrate elastic isotropy and plasticity driven by a ring-size expansion mechanism reflected in changes in ring statistics. The plastic region is substantially larger in ta-C than in a-C due to the post-yield shift from sp3 to sp2 C dominant bonding. In both a-C and ta-C, ultimate failure occurs when a reactive crack, traversed by long sp chains, forms and propagates predominantly perpendicular to the direction of the applied strain. Oxygen infiltration into the fractured region significantly reduces stress resistance, primarily through the early rupture of long sp chains. MD simulations and analysis are extended to a-C slabs, a-C nanotubes, and partially a-C nanotubes. The latter nanostructure highlights the differences between the elastically isotropic a-C walls, which develop circumferential cracking, and the crystalline walls, which tear along crystallographic directions. These results provide a strong foundation for further computational characterization of a-C materials.
A randomized trial comparing medium cut-off membrane dialyzers with online hemodiafiltration for uremic toxins clearance in hemodialysis patients
Accelerating inverse Kohn–Sham calculations using reduced density matrices
The Ryabinkin–Kohut–Staroverov (RKS) and Kanungo–Zimmerman–Gavini (KZG) methods offer two approaches to find exchange-correlation (XC) potentials from ground state densities. The RKS method utilizes the one- and two-particle reduced density matrices to alleviate any numerical artifacts stemming from a finite basis (e.g., Gaussian- or Slater-type orbitals). The KZG approach relies solely on the density to find the XC potential by combining a systematically convergent finite-element basis with appropriate asymptotic correction on the target density. The RKS method, being designed for a finite basis, offers computational efficiency. The KZG method, using a complete basis, provides higher accuracy. In this work, we combine both methods to simultaneously afford accuracy and efficiency. In particular, we use the RKS solution as an initial guess for the KZG method to attain a significant 3–11× speedup. This work also presents a direct comparison of the XC potentials from the RKS and the KZG method and their relative accuracy on various weakly and strongly correlated molecules, using their ground state solutions from accurate configuration interaction calculations solved in a Slater orbital basis.
Photoinduced magnetooptical response in monolayer transition metal dichalcogenides
Magnetooptical effects, manifesting the interactions between the light and magnetic materials, enable a wide range of the potential applications in sensing, optical isolators, switches as well as data storages. The emergence of monolayer transition metal dichalcogenides allows the alternative chances to unravel their magnetooptical effects under the application of the magnetic field. Here, without relying on the magnetic field, we demonstrate the generation of the magnetooptical effect in monolayer transition metal dichalcogenides driven by the irradiation of an off-resonant circularly polarized light, which breaks the limitation of the absence of the magnetooptical effect in the pristine ones. We find that the induced optical Hall conductivity of monolayer transition metal dichalcogenides can be engineered by the effective energy term depending on the amplitude and frequency of the circularly polarized light. Furthermore, we also present the efficient control of the optical Hall conductivity in monolayer transition metal dichalcogenides by its chemical potential. Our results establish an effective way to produce the remarkable magnetooptical effects in monolayer transition metal dichalcogenides and the avenue for next-generation applications via two-dimensional layered materials.
A parallel texture-based region-growing algorithm implemented in OpenMP
Three-dimensional memory of nuclear organization through cell cycles
The genome in the cell nucleus is organized by a dynamic process influenced by structural memory from mitosis. In this study, we develop a model of human genome dynamics through cell cycles by extending the previously developed whole-genome model to cover the mitotic phase. With this extension, we focus on the role of mitotic and cell cycle memory in genome organization. The simulation progresses from mitosis to interphase and the subsequent mitosis, leading to successive cell cycles. During mitosis, our model describes microtubule dynamics, showing how forces orchestrate the assembly of chromosomes into a rosette ring structure at metaphase. The model explains how the positioning of chromosomes depends on their size in metaphase. The memory of the metaphase configuration persists through mitosis and into interphase in dimensions perpendicular to the cell division axis, effectively guiding the distribution of chromosome territories over multiple cell cycles. At the onset of each G1 phase, phase separation of active and inactive chromatin domains occurs, leading to A/B compartmentalization. Our cycling simulations show that the compartments are unaffected by structural memory from previous cycles and are consistently established in each cell cycle. The genome model developed in this study highlights the interplay between chromosome dynamics and structural memory across cell cycles, providing insights for the analyses of cellular processes.
Saturation genome editing-based clinical classification of BRCA2 variants
Deep learning based screening model for hip diseases on plain radiographs
Introduction The interpretation of plain hip radiographs can vary widely among physicians. This study aimed to develop and validate a deep learning-based screening model for distinguishing normal hips from severe hip diseases on plain radiographs. Methods Electronic medical records and plain radiograph from 2004 to 2012 were used to construct two patient groups: the hip disease group (those who underwent total hip arthroplasty) and normal group. A total of 1,726 radiographs (500 normal hip radiographs and 1,226 radiographs with hip diseases, respectively) were included and were allocated for training (320 and 783), validation (80 and 196), and test (100 and 247) groups. Four different models were designed–raw image for both training and test set, preprocessed image for training but raw image for the test set, preprocessed images for both sets, and change of backbone algorithm from DenseNet to EfficientNet. The deep learning models were compared in terms of accuracy, sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), F1-score, and area under the receiver operating characteristic curve (AUROC). Results The mean age of the patients was 54.0 ± 14.8 years in the hip disease group and 49.8 ± 14.9 years in the normal group. The final model showed highest performance in both the internal test set (accuracy 0.96, sensitivity 0.96, specificity 0.97, PPV 0.99, NPV 0.99, F1-score 0.97, and AUROC 0.99) and the external validation set (accuracy 0.94, sensitivity 0.93, specificity 0.96, PPV 0.95, NPV 0.93, F1-score 0.94, and AUROC 0.98). In the gradcam image, while the first model depended on unrelated marks of radiograph, the second and third model mainly focused on the femur shaft and sciatic notch, respectively. Conclusion The deep learning-based model showed high accuracy and reliability in screening hip diseases on plain radiographs, potentially aiding physicians in more accurately diagnosing hip conditions.
Timing the Taming of Vascular Inflammation
Human responses to the DNA prime/chimpanzee adenovirus (ChAd63) boost vaccine identify CSP, AMA1 and TRAP MHC Class I-restricted epitopes
Background A three-antigen DNA-prime/chimpanzee adenovirus 63 (ChAd63) boost vaccine containing pre-erythrocytic Plasmodium falciparum (Pf) circumsporozoite protein (CSP), Pf apical membrane antigen-1 (AMA1) and malaria multiple epitopes (ME) fused to Pf thrombospondin-related adhesion protein (ME-TRAP) elicited higher vaccine efficacy (VE) in an open label, randomized Phase 1 trial against controlled human malaria infection (CHMI) than the two-antigen vaccine DNA/Human Adenovirus 5 (HuAd5) containing CSP and AMA1. The objective of this follow-up study was to determine whether responses to CSP, AMA1 or TRAP MHC Class I-restricted epitopes were associated with VE. Methodology Protected (n = 6) and non-protected participants (n = 26) were screened in FluoroSpot interferon gamma (IFN-γ) and Granzyme B (GzB) assays using antigen-specific 15mer peptide subpools spanning CSP (n = 9 subpools), AMA1 (n = 12 subpools), and TRAP (n = 11 subpools). Individual antigen-specific 15mers in the subpools with strong responses were then deconvoluted, evaluated for activities, and MHC Class I-restricted epitopes within the active 15mers were predicted using NetMHCpan algorithms. The predicted epitopes were synthesized and evaluated in the FluoroSpot IFN-γ and GzB assays. Results Protected and some non-protected participants had similar responses to individual antigen-specific peptide subpools, which did not distinguish only protected participants. However, deconvoluted antigen-specific positive subpools with high magnitudes of responses revealed individual 15mer peptides containing specific and/or predicted MHC Class I (HLA) epitopes. Responses to epitopes were either IFN-γ-only, IFN-γ and GzB, or GzB-only. Due to limitation of cells, most of the analysis concentrated on the identification of protection associated AMA1 epitopes, since most of the predominant pool specific responses were generated against AMA1 15mer subpools. Furthermore, we previously identified protection associated HLA class I-restricted epitopes in a previous gene-based vaccine trial. Seven predicted minimal epitopes in AMA1 were synthesized and upon testing, five recalled responses from protected participants confirming their possible contribution and association with protection, and two recalled responses from non-protected participants. Two protection-associated epitopes were promiscuous and may have also contributed to protection by recognition of different HLA alleles. In addition, strongly positive antigen-specific 15mers identified within active antigen-specific subpools contained 39 predicted but not tested epitopes were identified in CSP, AMA1 and TRAP. Finally, some non-protected individuals recognized HLA-matched protection-associated minimal epitopes and we discuss possible reasons. Other factors such as HLA allele fine specificity or interaction between other HLA alleles in same individual may also influence protective efficacy. Conclusions This integrated approach using immunoassays and bioinformatics identified and confirmed AMA1-MHC Class I-restricted epitopes and a list of predicted additional epitopes which could be evaluated in future studies to assess possible association with protection against CHMI in the Phase 1 trial participants. The results suggest that identification of protection-associated epitopes within malaria antigens is feasible and can help design potent next generation multi-antigen, multi-epitope malaria vaccines for a genetically diverse population and to develop robust assays to measure protective cellular immunity against pre-erythrocytic stages of malaria. This approach can be used to develop vaccines for other novel emerging infectious disease pathogens.
Reviewers for the <i>Journal</i> , July–December 2024
Correction: Using moss as a bio-indicator to evaluate soil quality in litchi orchard
Radiographic characteristics of impacted teeth: A retrospective study of 2199 radiograph
Objective To analyze the radiological characteristics of impacted teeth in the population of Makkah in Saudi Arabia. Methods A retrospective analysis was conducted on 2199 digital panoramic radiograph (OPG) scans collected from the database of the dental teaching hospital at Umm Al-Qura University, Makkah, KSA. Out of these, 1503 OPGs (749 males and 754 females) met the inclusion criteria, which required clear OPGs with high quality and good visibility of anatomic structures. The study included patients of both genders, aged between 13 and 70, with complete root formation of impacted teeth. Results The analysis of 1,503 patients’ radiographs revealed that 27.70% had impacted third molars, with mandibular molars being more commonly affected than maxillary molars. Additionally, other impacted teeth were observed, including maxillary canines, second premolars, second molars, and supernumerary teeth. Male patients had a slightly higher prevalence of impaction. The majority of impacted third molars were found in the age group of 18-30. The angulation and depth of impacted teeth differed between maxillary and mandibular arches. Most impacted mandibular third molars had a class I relation with the ramus. Conclusion The study provides valuable insights into impacted teeth in Makkah, Saudi Arabia. It highlights a significant occurrence of impacted third molars, as well as other teeth. These findings contribute to a better understanding of impacted teeth and provide important support for dental professionals in their efforts to improve patient outcomes.
Adjusted trajectory of medication exposure taking into account the periodicity of dispensations and the number of dispensed packs and comparative analysis on EFEMERIS database
We presented an adjustment method for the calculation of medication exposure trajectories based on the number of dispensed packs and the type of dispensations (occasional or regular). A comparative study based on the EFEMERIS data was carried out using three different scenarios of trajectory calculation depending on whether or not the number of packs and the periodicity of medication dispensations were taken into account. The impact of the scenario was highlighted using global indicators on the number of Define-Daily Dose (DDD) on all women exposed; the study of changes in individual trajectories from one scenario to another was carried out; we also compared the results of a clustering into four groups. If 65% of the trajectories remained unchanged, we could observe on the rest significant changes in number of DDD and/or on individual exposure profile. We observed 4% of trajectories that were attributed to a different cluster, and the clustering was of better quality with the adjustment method. Depending on the study context, an impact on cluster distribution could be observed for some maternal characteristics and neonatal outcomes. This was the case for a higher occurrence of neonatal pathology for neonates from mothers belonging to the cluster with high doses of psychotropics, thus reinforcing the conclusions of previous studies of a link between high exposure to psychotropic medications and presence of pathology for the newborn.