Thermal stability and phase transformation of conductive α-(AlxGa1−x)2O3/Ga2O3 heterostructure on sapphire substrates

B Botong Li S Shisong Luo (Department of Electrical and Computer Engineering, Rice University 1 , Houston, Texas 77005,) J Jaeheon Jung (School of Materials Science and Engineering, Kyungpook National University 3 , Daegu 41566,) B Bobby G. Duersch Q Qinyuan Jiang (Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering) C Cheng Chang L Lucas Lau (Department of Electrical and Computer Engineering, Rice University 1 , Houston, Texas 77005,) Z Zonghao Zhang J Jianhua Li H Hunter Ellis (Department of Electrical and Computer Engineering, University of Utah 1 , Salt Lake City, Utah 84112,) I Imteaz Rahaman (Department of Electrical and Computer Engineering, University of Utah 1 , Salt Lake City, Utah 84112,) S Shengxi Huang R Roy Byung Kyu Chung (School of Materials Science and Engineering, Kyungpook National University 3 , Daegu 41566,) K Kai Fu (State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering) Y Yuji Zhao (Department of Electrical and Computer Engineering, Rice University 1 , Houston, Texas 77005,)

Abstract

Thermal stability and phase transformation of conductive α-(Al0.16Ga0.84)2O3/Ga2O3 heterostructure on sapphire substrates were investigated via in situ high temperature x-ray diffraction, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The conductive α-(Al0.16Ga0.84)2O3/Ga2O3 heterostructure with fluorine (F) doping was grown by mist-chemical vapor deposition on sapphire substrates, achieving a Hall mobility of 28 cm2/(V s). The heterostructure exhibited thermal stability up to ∼550–575 °C before transforming to β-(AlxGa1−x)2O3/Ga2O3. The transformed β-Ga2O3 is mainly polycrystalline rather than a high-quality epitaxial phase. Reciprocal space mapping results reveal that the edge dislocation density remains consistently higher than the screw dislocation density throughout the heating process, indicating that the crystalline imperfection in α-Ga2O3 is dominated by in-plane mosaicity. After the phase transformation from the α phase to the β phase, catastrophic damage to the film and upheaval of the surface were observed by SEM and AFM.

Article Details

Volume / Issue Vol. 128, Issue 21
Published May 25, 2026
ISSN 0003-6951
Publisher American Institute of Physics

Journal Info

Applied Physics Letters

American Institute of Physics

ISSN: 0003-6951 Physical Sciences

Authors (15)

B

Botong Li

S

Shisong Luo

Department of Electrical and Computer Engineering, Rice University 1 , Houston, Texas 77005,

J

Jaeheon Jung

School of Materials Science and Engineering, Kyungpook National University 3 , Daegu 41566,

B

Bobby G. Duersch

Q

Qinyuan Jiang

Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering

C

Cheng Chang

L

Lucas Lau

Department of Electrical and Computer Engineering, Rice University 1 , Houston, Texas 77005,

Z

Zonghao Zhang

J

Jianhua Li

H

Hunter Ellis

Department of Electrical and Computer Engineering, University of Utah 1 , Salt Lake City, Utah 84112,

I

Imteaz Rahaman

Department of Electrical and Computer Engineering, University of Utah 1 , Salt Lake City, Utah 84112,

S

Shengxi Huang

R

Roy Byung Kyu Chung

School of Materials Science and Engineering, Kyungpook National University 3 , Daegu 41566,

K

Kai Fu

State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering

Y

Yuji Zhao

Department of Electrical and Computer Engineering, Rice University 1 , Houston, Texas 77005,