Browse Articles

Discover research articles across all indexed journals

Canine Olfaction Combined With Bayesian Modeling for Multicancer Detection From Breath Samples: A Phase II Study in India

Journal of Clinical Oncology Sanjeev Kulgod, Basavaraj R. Patil, Shashidhar Kallappa et al. Jul 01, 2026 DOI: 10.1200/jco-25-02310

PURPOSE Low-cost, acceptable, high-sensitivity triage tests are needed to address low cancer prevalence in population screening, particularly in low- and middle-income countries. Breath-based canine olfaction may serve this role, but evidence, to date, has been limited to small, single-cancer studies, largely from high-income settings. We evaluated the analytical validity of a multicancer breath detection system using trained dogs integrated with Bayesian fusion modeling. METHODS We conducted an assessor-masked, multicenter case-control study across six hospitals in Karnataka, India (CTRI/2024/10/075938). A total of 3,275 participants were enrolled (1,773 training; 1,502 testing). The test cohort included 283 treatment-naïve, biopsy-confirmed cancer cases spanning seven major cancer groups and 1,219 controls (healthy volunteers, nononcologic chronic disease, or benign biopsy). Breath was collected using cotton surgical masks, stored under –20°C cold-chain conditions, and evaluated by trained detection dogs. Individual dog indications were integrated using a Bayesian fusion framework incorporating historical dog performance and participant-level covariates. RESULTS The fusion system achieved 90.8% sensitivity (95% CI, 87.2 to 94.5) and 91.3% specificity (95% CI, 89.7 to 92.9), with a receiver operating characteristic AUC of 0.962 (95% CI, 0.952 to 0.969). The sensitivity for early-stage disease (stage I to II) was 90.6% and remained consistent across major cancer types. CONCLUSION In a 1,502-participant test cohort, canine olfaction combined with Bayesian fusion demonstrated high analytical accuracy for multicancer detection from breath. These findings establish analytical validity and support prospective evaluation in true screening populations.

Synergistic Lewis Acid Photocatalysis Over Cluster‐Defect‐Engineered UiO‐66 for Efficient Liquid Biomass Upgrading

Angewandte Chemie International Edition Hao Wang, Li‐Long Zhang, Haimei Xu et al. Jul 01, 2026 DOI: 10.1002/anie.5124107

ABSTRACT Defect engineering provides new opportunities to overcome the intrinsic limitations of metal–organic frameworks (MOFs) in photocatalysis. Herein, a cluster‐defect engineering (CDE) strategy is employed to modify the pristine UiO‐66 framework, wherein Zn incorporation followed by selective acid etching yields defect‐rich A/(Zn,Zr)UiO‐66 catalysts featuring hierarchical porous architectures and abundant Lewis (L) acid sites. Optical and photoelectrochemical analyses confirm that CDE broadens visible‐light harvesting, narrows the bandgap, and prolongs carrier lifetimes. The synergistic interplay between L acid sites and photocatalysis over A/(Zn,Zr)UiO‐66 results in an excellent photocatalytic performance in biodiesel production via oleic acid (OA) esterification with methanol (CH 3 OH) under mild reaction conditions, outperforming pristine UiO‐66. Notably, the optimized A/(Zn,Zr)UiO‐66‐0.2 achieves a remarkable 99.3% biodiesel yield under mild conditions, alongside superior stability and reusability. Further, in situ spectroscopic investigations and density functional theory (DFT) calculations disclose that CDE lowers the coupling barrier of OA and CH 3 O• radicals by strengthening OA adsorption and activation as well as facilitating charge stabilization at unsaturated Zr sites. This work highlights CDE as an ingenious strategy for tailoring the electronic configuration and interfacial chemistry of MOFs, offering a versatile platform for visible‐light‐driven biomass upgrading and sustainable fuel production.

FireSmoke-FL: a privacy-preserving federated learning framework for real-time fire and smoke detection

Scientific Reports Fahad Alblehai, Nasser Alalwan, Ahmed Ibrahim Alzahrani et al. Jul 01, 2026 DOI: 10.1038/s41598-026-59830-y

Evolution and Suppression of Spin Cycloid in Epitaxial BiFeO <sub>3</sub> Thin Films

Advanced Materials Maya Ramesh, Xinyan Li, Shashank Ojha et al. Jul 01, 2026 DOI: 10.1002/adma.202518938

ABSTRACT A systematic study of the effect of film thickness on the stability of the spin cycloid in BiFeO 3 grown epitaxially on TbScO 3 (110) substrates reveals a complex evolution of both the crystal and ferroelectric domain structures as well as the magnetic order. For films thicker than ∼5 nm, the structure remains rhombohedral, but the lattice mismatch is accommodated by the formation of 71° ferroelastic‐closure domains, rather than misfit dislocations, followed by the formation of 109° domains. For films ≲ 5 nm, a mixed‐phase coexistence of a polar, rhombohedral‐like ( R 3 c ) phase and an antipolar ( Pnma ) phase is observed. Scanning nitrogen‐vacancy magnetometry reveals a change in the propagation vector of the spin cycloid with thickness. It evolves from parallel to the ferroelectric domains for 50 nm thick samples and thicker and reorients to perpendicular to the ferroelectric domains for intermediate thicknesses, and vanishes for films ≲ 5 nm, which is reflected in macroscopic spin transport measurements and supported by the simulations. Ultimately, this work provides a deep understanding of the role of film thickness and electrostatic boundary conditions on the ferroelectric domain configuration and, therefore on the spin cycloid to design the device with electric field control antiferromagnetism.

2D Perovskite Engineering Enables Robust Self‐Assembled Monolayers for High‐Performance Perovskite Solar Cells

Advanced Materials Zihan Gu, Kaiyu Wang, Ruigang Yan et al. Jul 01, 2026 DOI: 10.1002/adma.73561

ABSTRACT Self‐assembled monolayers (SAMs) are critical hole‐selective contacts in inverted perovskite solar cells (PSCs), yet their practical implementation is hindered by desorption and aggregation during solution‐based perovskite deposition. Here, we report a transient two‐dimensional (2D) perovskite protection strategy using volatile propylammonium chloride, which temporarily shields SAMs from solvent‐induced degradation and subsequently decouples during thermal annealing. This mechanism preserves the integrity of the SAM interface while enabling uniform crystallization of large‐area perovskite films and efficient charge extraction. Consequently, PSCs achieve a power conversion efficiency (PCE) of 26.14% for 0.05 cm 2 devices, 23.27% for a 5 × 5 cm 2 mini‐module, and 22.34% for a 30 × 30 cm 2 module (615.7 cm 2 active area). Notably, the large‐area module retains 90% of its initial efficiency after 2000 h of continuous maximum power point operation, demonstrating both high performance and operational stability, highlighting a scalable route for reliable perovskite photovoltaics.

A retro-prospective study to determine the patterns of recurrence in gastric and GE junction cancers after curative intent treatment at a tertiary cancer centre of North India.

Journal of Clinical Oncology Abrar Rasool Khanday, Nisar Ahmad Syed, Hussain Mohmad Mir et al. Jul 01, 2026 DOI: 10.1200/jco.2026.44.19_suppl.122

122 Background: Gastric cancer remains one of the leading causes of cancer-related mortality worldwide. Despite advancements in treatment modalities, recurrence continues to pose a significant challenge, severely impacting patient outcomes. This study aimed to analyze recurrence patterns and their associated factors in patients who underwent curative treatment for gastric cancer. Methods: We conducted a retrospective analysis of 446 patients who underwent curative-intent treatment, including surgery, neoadjuvant chemotherapy, and adjuvant therapy. Data on recurrence rates, tumor characteristics, treatment modalities, and surgical techniques were collected and analyzed. Statistical comparisons were performed to evaluate the influence of demographic factors, histological type, tumor location, pathological staging, and treatment approaches on recurrence outcomes. Results: The overall recurrence rate was 28.3%, with the majority occurring within 14 months (median 10 months) post-treatment. Recurrence rates were consistent across age groups, while males exhibited a slightly higher rate (29.8%) than females (23.7%). Tumors in the Pylorus and Antrum had the highest recurrence rates (32.0%), while the fundus showed a remarkably high rate (71.4%) in a small sample size. Poorly differentiated tumors and Signet Ring Cell carcinomas were associated with the highest recurrence rates (60.9%). Treatment approaches significantly influenced outcomes; patients receiving neoadjuvant chemotherapy, surgery, and adjuvant therapy had the lowest recurrence rate (24.1%). D2 lymphadenectomy and total gastrectomy were associated with better outcomes compared to D1 lymphadenectomy and proximal or distal gastrectomy. Advanced pathological staging (T4, N3) and higher tumor regression grades (TRG 4) correlated with higher recurrence rates. Peritoneal recurrence was the most common pattern (44.4%), followed by distant metastases (27.0%) and local recurrence (17.5%). Conclusions: This study highlights the multifactorial nature of gastric cancer recurrence, driven by tumor characteristics, treatment modalities, and surgical techniques. Peritoneal recurrence remains predominant, with most recurrences occurring within the first year post-treatment. These findings emphasize the importance of tailored treatment strategies, meticulous surgical approaches, and close monitoring during the initial months after treatment. Future research should focus on the biological mechanisms of recurrence and the development of targeted therapies to improve long-term survival in gastric cancer patients.

Crystal Engineering of Intrinsic Dynamicity in Metal‐Organic Frameworks for Adaptive Multicomponent Catalysis

Angewandte Chemie International Edition Xu Jia, Chongting Ren, Shengyun Hu et al. Jul 01, 2026 DOI: 10.1002/anie.7413214

ABSTRACT Metal‐organic frameworks (MOFs) provide unique catalytic environments through steric confinement imposed by their pores that govern reactivity, but concomitantly limit complex multicomponent transformations. Here, we first report a crystallography‐guided design of intrinsically dynamic MOFs that overcome this longstanding challenge. A crystallography–catalysis feedback loop with dimensionality and ligand‐flexibility tuning built a homologous Zn‐MOF series, revealing intrinsically dynamic, layer‐pillared Zn‐Bpe as the optimal catalyst. Mechanistic studies with a ligand‐substituted rigid analogue, host‐guest binding, density functional theory (DFT), and ab initio molecular dynamics (AIMD) reveal an adaptive catalytic mechanism where guests induce in situ framework dynamics, enhancing the diffusion of the substrates and the activity of the catalytic center. This dynamicity enables efficient and selective multicomponent couplings, exhibiting broad substrate tolerance and functional group compatibility, including a tandem domino Petasis reaction. Our findings establish intrinsic dynamicity as a generalizable design principle in MOF catalysis, balancing accessibility, selectivity, and structural integrity in complex transformations.

Edge-prior and reliability-guided collaborative learning for white blood cell classification

Scientific Reports Rong Gao, Qi Ke, Aiquan Li et al. Jul 01, 2026 DOI: 10.1038/s41598-026-60469-y

Impact of nurse-initiated early telephone follow-up on unplanned 30-day hospital admissions after first-cycle chemotherapy: A real-world implementation study.

Journal of Clinical Oncology Pimsiri Aksornrung Jul 01, 2026 DOI: 10.1200/jco.2026.44.19_suppl.326

326 Background: Patients receiving chemotherapy may experience treatment-related side effects after discharge, particularly during the first cycle. Patients and caregivers often struggle to differentiate symptoms that can be managed at home from those requiring medical attention, leading to delayed care or unplanned hospital visits. However, structured early follow-up after chemotherapy is not routinely incorporated into post-treatment care. We implemented a nurse-initiated telephone follow-up process and evaluated its impact on unplanned hospital visits within 30 days after chemotherapy. Methods: A nurse-initiated telephone follow-up program was implemented for patients receiving their first cycle of chemotherapy in 2025. Nurses contacted patients on day 1 and day 3 after treatment to assess treatment-related symptoms, provide symptom-specific self-care advice, and screen for warning signs requiring further medical evaluation. Patients with moderate, severe, or persistent symptoms were discussed with the treating physicians. Outcomes were compared with historical pre-implementation data from 2024. The primary outcome was unplanned hospital admissions related to chemotherapy-associated side effects within 30 days. Results: In 2024, a total of 512 patients received first-cycle chemotherapy, with an unplanned 30-day hospital admission rate of 17.38% related to chemotherapy-associated side effects. In 2025, 516 patients were included following implementation of the nurse-initiated telephone follow-up program, with 9% experiencing unplanned hospital admissions within 30 days. Despite differences in patient volume between the two years, the admission rate in 2025 was lower compared with 2024. Follow-up calls in 2025 commonly addressed fatigue, gastrointestinal symptoms, and fever, and early nurse assessment facilitated appropriate escalation or nurse-led management. Conclusions: Compared with historical data from 2024, nurse-initiated telephone follow-up after first-cycle chemotherapy in 2025 was associated with a reduction in unplanned hospital admissions related to treatment-associated side effects within 30 days. This structured follow-up process supports early symptom assessment, timely guidance, and appropriate escalation of care. Integrating nurse-initiated telephone follow-up into routine oncology practice may help reduce avoidable admissions and improve supportive care delivery.

Cyclo‐Polyproline: Chameleonic All‐Peptide Macrocycles With Induced‐Fit Host‐Guest Recognition

Angewandte Chemie International Edition Camilla Di Girolamo, Patricia C. Fleming, Caroline R. Kwawu et al. Jul 01, 2026 DOI: 10.1002/anie.8698780

ABSTRACT We report the design, synthesis, and characterization of a novel class of all‐peptide macrocycles, Cyclo‐Polyprolines ( CP ). Exploiting the precision of Fmoc‐based solid‐phase peptide synthesis (SPPS) and head‐to‐tail macrocyclization, this platform grants unparalleled control over the macrocycle's primary sequence and secondary structure, offering a viable route toward exo ‐/ endo ‐functionalization and addressing a bottleneck of traditional synthetic host macrocycles. The resulting CP scaffold is highly amphiphilic, exhibiting excellent solubility in both organic and aqueous media. Structural analysis via NMR spectroscopy and single‐crystal x‐ray diffraction reveals a distinct chameleonic character: the macrocycle shifts from an all‐junctions‐ cis conformation in organic solvents to a predominantly all‐junctions‐ trans isomer in water. We demonstrate that this transition is driven by a cooperative hydration effect, wherein water molecules stabilize the expanded framework through precise two‐point hydrogen bonding. Demonstrating responsive host‐guest capabilities, CP undergoes induced‐fit isomerization to bind ligands, successfully forming, among other species, an all‐peptide pseudo‐rotaxane. This methodology establishes a robust platform for creating functionalized, proline‐based hosts with significant potential in medicinal chemistry, drug delivery, and organocatalysis, thereby bridging the gap between supramolecular systems and enzyme mimetics.

Comparative efficacy of second- and third-generation fluoroquinolone antibiotics against systemic Escherichia coli infection in broiler chickens in Qalyubia Governorate, Egypt

Scientific Reports Ali M. Asy, Amany O. Selim, Dalia M. Azab et al. Jul 01, 2026 DOI: 10.1038/s41598-026-59593-6

Abstract Avian pathogenic Escherichia coli (APEC) causes severe colibacillosis in poultry. This study compared the efficacy of the third-generation fluoroquinolone levofloxacin and the second-generation enrofloxacin against APEC. In vitro, 155 samples (livers, hearts, and lungs) from broiler farms in Qalyubia, Egypt, yielded 43 E. coli isolates, of which 16 formed strong biofilms. Antibacterial sensitivity testing revealed that levofloxacin achieved a higher susceptibility rate (43.75%) and larger inhibition zones (26 mm) compared with enrofloxacin (18.75%, 13 mm), indicating superior antibacterial activity. In vivo, 150 broiler chicks were experimentally infected with APEC O2 and allocated to five groups: negative control, positive control, levofloxacin-treated, enrofloxacin-treated, and enrofloxacin-colistin combination. Levofloxacin treatment resulted in significantly higher cumulative body weight gain and lower mortality (2460.37, 3.33%), compared with enrofloxacin (2126.09, 6.67%) ( P  &lt; 0.05). Levofloxacin was further associated with improved hematological and biochemical profiles, reduced oxidative stress markers (MDA, SOD, GSH), and lower bacterial counts in visceral organs ( P  &lt; 0.05). Collectively, these findings indicate that levofloxacin offers enhanced therapeutic efficacy over enrofloxacin in the treatment of avian colibacillosis under the conditions of this study.

Electronic Delocalization‐Confinement Coupling in Edge‐Coordinated CQDs@MXene Enables Hydrogen‐Bond Modulation for Ultrafast Proton Transport

Advanced Materials Che Liu, Kaiyang Guo, Yan Liu et al. Jul 01, 2026 DOI: 10.1002/adma.73570

ABSTRACT Efficient proton transport in 2D confined electrodes critically depends on the flexibility of interfacial hydrogen‐bond networks. However, the interfacial issue becomes more pronounced in the 2D confined space. The strong hydrogen bonds between confined water molecules and surface ─O terminations of MXenes immobilize protons and hinder charge storage kinetics. Here, we introduce an edge‐coordination strategy to achieve precise electronic delocalization modulation in Ti 3 C 2 T x MXene by anchoring carboxyl‐functionalized carbon quantum dots (CQDs) at positively charged edges. The CQDs induce substantial electron delocalization on surface ─O sites, which simultaneously weakens rigid hydrogen bonds and facilitates interfacial charge transfer. This regulation establishes a dynamic hydrogen‐bond network that supports continuous Grotthuss‐type proton migration within the confined channels. Consequently, the optimized CQDs@MXene electrode delivers a volumetric capacitance of 2507.2 F cm −3 , retains 65.8% at 1000 mV s −1 , and maintains nearly 100% stability over 10 000 cycles. In situ vibrational spectroscopy and density functional theory reveal that the electron delocalization drives the weak hydrogen‐bond interface and charge transfer coupling governs proton transport kinetics. This work establishes electronic delocalization as an effective paradigm for manipulating hydrogen‐bond dynamics and interfacial charge transport for ultrafast ion transport in confined electrochemical systems.

Heart failure–related mortality in patients with breast cancer: A 26-year national surveillance study (1999–2024).

Journal of Clinical Oncology Muhammad Hassan Ashraf Rai, Mazhar Ali, Muhammad Atif Mazhar et al. Jul 01, 2026 DOI: 10.1200/jco.2026.44.19_suppl.43

43 Background: Heart failure (HF) is a recognized comorbidity in breast cancer patients, affecting both survival and quality of life. This study examines longitudinal trends and demographic and geographic disparities in HF-related mortality over 25 years to inform cardio-oncology care. Methods: CDC WONDER mortality data (1999–2024) were analyzed for women ≥25 years using ICD-10 codes C50 (breast cancer) and I11.0, I13.0, I13.2, and I50 (HF). AAMRs per 100,000 were stratified by race/ethnicity, age, and geography. Joinpoint regression estimated APC and AAPC with 95% CIs; p &lt; 0.05 was considered significant. Results: A total of 72,361 deaths were identified, occurring primarily at home (31.83%) (Table 1). Overall AAMR declined marginally from 2.63 (95% CI: 2.53–2.72) in 1999 to 2.57 (2.49–2.65) in 2024 (AAPC: −0.01; p = 0.95). Two distinct trend segments were identified: a significant decline through 2014 (APC: −3.46; p &lt; 0.001), followed by a significant increase through 2024 (APC: 5.40; p &lt; 0.001). Women aged 65–85+ years had the highest burden (AAMR: 9.44). NH Black women had the highest 2024 AAMR (3.54), compared to NH White (2.68) and Hispanic/Latino (1.39) women. The Midwest had the highest 2024 AAMR (2.80) and the Northeast the lowest (2.13). Non-metropolitan areas had higher AAMRs than metropolitan areas (2.55 vs. 2.11 through 2020). At the state level, Mississippi recorded the highest average AAMR from 1999–2020 (3.34) and remained highest from 2020–2024 (5.14). Conclusions: After more than a decade of decline, HF-related mortality in breast cancer patients has risen sharply since 2014, with persistent disparities among older women, NH Black patients, and those in non-metropolitan and Midwestern areas. These findings identify populations where targeted cardio-oncology interventions are most needed. Deaths and age-adjusted mortality rates (AAMRs) per 100,000 for heart failure in patients with breast cancer, 1999–2024. Variable Deaths AAMR (95% CI), 1999 AAMR (95% CI), 2024 Overall 72,361 2.63 (2.53–2.72) 2.57 (2.49–2.65) NH Black 8,474 2.85 (2.50–3.19) 3.54 (3.25–3.85) NH White 59,963 2.68 (2.58–2.79) 2.68 (2.59–2.78) Hispanic/Latino 2,666 1.37 (1.05–1.75) 1.39 (1.21–1.59) Northeast 13,675 2.44 (2.24–2.64) 2.13 (1.97–2.30) Midwest 18,753 3.24 (3.02–3.45) 2.80 (2.62–2.99) Metropolitan* 44,920 2.48 (2.38–2.58) 2.11 (2.03–2.19)* Non-metropolitan* 12,170 3.23 (2.99–3.48) 2.55 (2.35–2.75)* NH = Non-Hispanic. AAMRs per 100,000, age-adjusted to the 2000 U.S. standard population. *Urbanization data available through 2020 only.

Ligand‐Controlled Chemoselective and Enantioselective Cyclization of Enynes With Aroyl Chlorides

Angewandte Chemie International Edition Zhen‐Yu Wang, Ling‐Xia Zhang, Yuqing Jiang et al. Jul 01, 2026 DOI: 10.1002/anie.2250866

ABSTRACT Herein, we report a palladium‐catalyzed, ligand‐controlled approach for the switchable construction of cyclopropane‐fused heterocycles and seven‐membered N‐heterocyclic compounds via the chemoselective cyclization of enynes with aroyl chlorides. Furthermore, enantioselective synthesis of cyclopropane‐fused heterocycles was achieved using a chiral ligand. To highlight the synthetic utility, late‐stage modifications of acid chlorides derived from natural products and pharmaceuticals were demonstrated. DFT calculations reveal that the ligands play an important role in the chemoselective cyclization process by favoring either β‐H or β‐C elimination of the alkyl‐Pd(II) intermediate.

Assessment of the contact and spatial efficacy of the BiteBarrier perimeter device for area control of Ixodes scapularis

Scientific Reports Maria V. Murgia, Laurie Widder, Catherine A. Hill Jul 01, 2026 DOI: 10.1038/s41598-026-49297-2

Breaking the Voltage‐Loss Bottleneck in Organic Photovoltaics via Interfacial Molecular Orientation Engineering

Advanced Materials Weiwei Wu, Rui Sun, Xiaohei Wu et al. Jul 01, 2026 DOI: 10.1002/adma.73473

ABSTRACT Benefiting from non‐fullerene acceptors, organic photovoltaics (OPVs) have achieved power conversion efficiencies exceeding 21%. However, further progress critically depends on suppressing voltage losses ( V loss ), particularly non‐radiative voltage losses (Δ V 3 ). Here, we employ a precisely controlled donor/acceptor bilayer system, fabricated via a polydimethylsiloxane (PDMS) film‐transfer method, to systematically investigate the intrinsic role of interfacial molecular orientation in governing V loss . Devices with a face‐on/face‐on (P5TCN‐F0/Y6) configuration exhibit markedly reduced Δ V 3 and overall V loss compared with edge‐on/face‐on (P5TCN‐F50/Y6), face‐on/edge‐on (P5TCN‐F0/BTP‐2T), and edge‐on/edge‐on (P5TCN‐F50/BTP‐2T) counterparts. Transient absorption spectroscopy and time‐resolved photoluminescence measurements reveal that the face‐on/face‐on interface enables efficient charge transfer while suppressing charge‐transfer (CT) states recombination. Quantitative analysis further demonstrates that the markedly reduced non‐radiative recombination rate of the CT states is responsible for the enhanced electroluminescence quantum efficiency and the reduced Δ V 3 and V loss . These findings establish interfacial molecular orientation as a key lever for minimizing Δ V 3 without compromising high photocurrent and provide material design principles and morphology control requirements for further breaking the performance bottleneck in bulk heterojunction OPVs.

Interaction of DLL3-targeting CAR-T cells with the JAK1 inhibitor in treating small cell lung cancer.

Journal of Clinical Oncology Mengwei Li, Hua Zhong Jul 01, 2026 DOI: 10.1200/jco.2026.44.19_suppl.286

286 Background: Small cell lung cancer (SCLC) is an aggressive malignancy with limited effective treatment options. DLL3-targeted CAR-T therapy represents a promising immunotherapeutic strategy, but its efficacy is often hampered by tumor intrinsic aggressiveness and CAR-T cell exhaustion. The JAK-STAT signaling pathway is closely associated with tumor proliferation, survival, and immune regulation. However, whether JAK1 inhibition can enhance the anti-tumor activity of DLL3 CAR-T cells against SCLC remains unclear. Methods: Human SCLC cell lines were treated with JAK1 inhibitor alone or in combination with DLL3 CAR-T cells. In vitro assays included Western blot, qPCR, Annexin/PI apoptosis assay, flow cytometry, CCK-8 proliferation assay, Transwell migration and invasion assay, and soft agar colony formation assay. CAR-T cell exhaustion and memory phenotype were evaluated by flow cytometry and RNA-sequencing. Tumor cell killing efficiency was assessed in co-culture system and flow cytometry. Anti-tumor efficacy in vivo was evaluated in NSG mice bearing SCLC subcutaneous xenografts. Results: In vitro, JAK1 inhibition significantly induced apoptosis in SCLC cells, and suppressed cell proliferation, migration, invasion, and colony formation. Notably, JAK1 inhibition reduced the exhaustion phenotype and enhanced the memory-like phenotype of CAR-T cells, as validated by flow cytometry and RNA-seq. In co-culture killing assays, the combination of JAK1 inhibitor and DLL3 CAR-T cells further reduced the proportion of viable tumor cells compared with CAR-T treatment alone. In NSG mouse xenograft models, both CAR-T monotherapy and JAK1 inhibitor monotherapy inhibited tumor growth, while their combination resulted in significantly greater suppression of subcutaneous tumor growth. Conclusions: JAK1 inhibition exerts direct anti-tumor effects on SCLC cells by inhibiting proliferation, migration, invasion, and inducing apoptosis. Furthermore, JAK1 inhibition enhances the anti-tumor function of DLL3 CAR-T cells by mitigating CAR-T exhaustion and promoting memory formation. These preclinical findings support the combination of JAK1 inhibition with DLL3 CAR-T therapy as a novel and promising strategy for the treatment of SCLC.

A Bioinspired Nanozyme Enables Glycoimmune Therapy via Precision Sialoglycan Trimming

Angewandte Chemie International Edition Peixin Guan, Shangfei Li, Song Gao et al. Jul 01, 2026 DOI: 10.1002/anie.1539868

ABSTRACT Aberrant sialoglycan–Siglec interactions constitute an emerging glycoimmune checkpoint driving tumor immune evasion, yet selective intervention remains challenging for current cancer immunotherapies. Existing strategies, including Siglec blockade and sialidase treatment, are constrained by instability, immunogenicity, and limited tumor targeting. Here we report a molecularly imprinted nanobiomimetic enzyme (MINBE) that integrates a template‐defined catalytic pocket with a pH‐responsive protective inorganic‐polymer architecture, enabling selective editing of tumor‐associated sialic acids and immune modulation. MINBE is engineered utilizing a sialic acid‐containing disaccharide template to encode an imprinted catalytic nanocore, while inorganic scaffolds and polymer shielding enhance stability during systemic circulation. In the acidic tumor microenvironment, the pH‐responsive inorganic layer dissociates to expose its hydrolytic core for desialylation, thereby disrupting sialoglycan–Siglec signaling. Concomitantly, this activation is accompanied by the release of Mn ions, which promote dendriticcell activation. Both in vitro assays and in vivo studies in tumor‐bearing mice showed efficient tumor desialylation and pronounced tumor growth inhibition. This molecular imprinting encoded design provides a generalizable strategy for programmable sialoglycan editing, with potential applicability to modulate glyco‐immune checkpoints across tumor types and other glycan‐driven processes beyond cancer.

From muscles to motion: the role of sensor layout and physiological factors in hand motion decoding

Scientific Reports Daniel Andreas, Anany Dwivedi, Claudio Castellini et al. Jul 01, 2026 DOI: 10.1038/s41598-026-59979-6

Abstract Despite substantial progress in decoding biosignals for human motion prediction, the influence of participant- and experiment-related factors on the decodability of these signals has received comparatively little attention. This study evaluates the continuous prediction of hand and wrist joint flexion using the MyoKi database, which comprises surface electromyography, inertial measurement units, and force myography data from 35 participants without disabilities performing 74 daily-life tasks. Unlike existing datasets, MyoKi includes tasks that mimic real-world scenarios by allowing natural movement variations and muscle fatigue. Using a long short-term memory neural network, the impact of participant- and experiment-related factors on decoding accuracy was investigated. Our results show that both expanding sensor coverage to additional muscle regions and combining multiple sensor modalities significantly improve decoding performance, with the greatest gains observed for joints controlled by extrinsic muscles. Muscle fatigue, recording time, and participant characteristics such as weight also influenced model accuracy. However, decoding of movements driven by intrinsic hand muscles remains challenging due to anatomical limitations. These findings highlight the importance of sensor placement and multimodal fusion for myoelectric decoding and provide guidance for optimizing sensor configurations in future prosthetic and robotic applications.

Flexible Ag <sub>2</sub> Se‐Based Thermoelectrics: Fundamentals, Processing, and Device Applications

Advanced Materials Jie Qin, Yuchen Yang, Huangshui Ma et al. Jul 01, 2026 DOI: 10.1002/adma.202518096

ABSTRACT Ag 2 Se is widely recognized as a leading n‐type thermoelectric material for flexible and wearable applications owing to its narrow band gap, intrinsically low lattice thermal conductivity, and unusual room‐temperature plasticity. This review systematically summarizes recent advances in Ag 2 Se‐based thermoelectrics, beginning with its fundamental crystal structures, defect chemistry, and electronic band features that govern its semiconducting and superionic transport behavior. Advanced performance‐enhancement strategies are discussed in detail, including nanostructuring, stoichiometry tuning, doping, and the incorporation of inorganic or organic second phases. The progress in fabrication techniques, including vacuum‐assisted filtration, screen printing, magnetron sputtering, thermal evaporation, and additive manufacturing, has also been highlighted. Scalability, flexibility, and mechanical durability are emphasized. Furthermore, the assembly and application of Ag 2 Se‐based flexible thermoelectric devices are reviewed, covering thermoelectric generators, Peltier coolers, electronic skins, and photo‐thermoelectric hybrids. These devices demonstrate strong potential for energy harvesting, localized cooling, and smart sensing. Additionally, the challenges of device stability, large‐area integration, and multifunctional system design are assessed. This review links material‐level insights with device‐level applications to accelerate the deployment of Ag 2 Se‐based thermoelectrics in sustainable energy and wearable electronics.