Browse Articles
Discover research articles across all indexed journals
The panel threshold analysis of digitalization on manufacturing industry’s green total factor productivity
Nanoscale Manipulation of Single-Molecule Conformational Transition through Vibrational Excitation
Prevalence and correlates of symptoms of depression, anxiety, and psychological distress among women of reproductive age with delayed conception in urban and peri-urban low to mid-socioeconomic neighborhoods of Delhi, India: A cross-sectional study
Introduction One in six people of reproductive age experience infertility in their lifetime. Infertility can have significant impacts on mental health. Psychological distress is a broad term encompassing emotional suffering and mental health discomfort that can include symptoms of anxiety and depression but is not limited to these conditions. We investigated the prevalence of symptoms of depression, anxiety, and psychological distress and their associated risk factors among women of reproductive age with delayed conception. Methods A total of 1530 women were recruited from community settings in Northern India. Quantitative data were collected using a 4-item Patient Health Questionnaire-4 (PHQ-4) which is an ultra-brief self-report questionnaire consisting of a 2-item depression scale (PHQ-2) and a 2-item anxiety scale (generalized anxiety depression-2). Data were collected between July 2020 and August 2021. Descriptive analysis was conducted to summarise the characteristics and prevalence of symptoms of depression, anxiety, and psychological distress. Logistic regression was used to identify risk factors for psychological distress. Results We obtained responses from all 1,530 women using these scales. Over half (54.31%) of participants had psychological distress, of whom 38.10% were experiencing mild distress, 10.59% moderate distress, and 5.62% severe distress. Additionally,16.07% of participants reported symptoms of anxiety and 20% reported symptoms of depression. Factors associated with psychological distress were: (i) a higher total number of children that women intended to have in their lifetime, (ii) longer duration of trying to get pregnant (> 18 months), (iii) continuous effort trying to achieve pregnancy, (iv) women’s perception that conception is taking long, (v) social isolation, (vi) being emotionally or verbally abused by husband and family members, and (vii) having other co-morbidities such as hypertension, irregular menstrual cycles, irregular bleeding between regular cycles, abnormal vaginal discharge or pain during sex. Conclusion This study demonstrates the high mental health burden faced by women with delayed conception in low- to mid-socioeconomic neighbourhoods of North India including high levels of anxiety and depression. To better support individuals and couples achieve their reproductive goals, we advocate for the integration of psychosocial interventions to improve mental health outcomes and promote the well-being of those facing delays in achieving pregnancy. Specifically, addressing social isolation, fostering supportive networks, combating violence towards women, and incorporating fertility counselling and group-based psychosocial interventions within community and healthcare settings are needed to alleviate mental health symptoms among women who have difficulties in conceiving. However, the successful implementation of these recommendations may be challenged by the availability of the state’s healthcare resources, necessitating tailored strategies with contextual adaptations.
Cognitive analysis and path construction of Chinese students’ mathematics cognitive process based on CDA
Atomically Dispersed Ta–O–Co Sites Capable of Mitigating Side Reaction Occurrence for Stable Lithium–Oxygen Batteries
Experimental assessment of damage and microplastic release during cyclic loading of clear aligners
The widespread adoption of clear aligners in orthodontic treatments in recent years has necessitated a more precise examination of the mechanical properties of the devices currently available in orthodontics. Recent studies indicate that aligners, when exposed to the forces exerted during swallowing, undergo fatigue-like phenomena, leading to chip formation and cracks. The cumulative damage results in a compromised fit between the tooth and aligner, which is crucial for the effective execution of orthodontic treatment. Additionally, the formation of chips poses a potential risk to patients, as there is a possibility of inadvertently ingesting microplastics that become detached from the aligner over time. This study attempts to assess the release of microplastics from the aligners subjected to cyclic compressive loading. Three different aligners (Essix Ace, Ghost Aligner and Invisalign) are tested to simulate swallowing conditions over the aligner usage period. The mechanical performance is studied in terms of the energy absorbed by the aligner, which shows that the Essix Ace has a stable energy absorption behaviour, while the energy absorbed by the Invisalign is significantly higher than their counterparts. Ghost Aligner did not perform well in the cyclic compression tests. The microplastics (MPs) released by the aligners are examined under an optical microscope. A dimensional analysis based on k-means image segmentation and edge detection algorithm is developed to analyse the MPs. The dimensional analysis of the MPs revealed that the ingestion of the MPs released by all the three aligners does not pose a health risk.
Trends of climate variability and its association with farmers’ perceptions of climate change in Gassera district, southeastern Ethiopia
Fossil bird skull suggests Antarctic waterfowl survived Cretaceous mass extinction
Standardized Approach for Diversification of Complex Small Molecules via Aryl Thianthrenium Salts
Does management support drive sustained agile usage? a serial mediation model and cIPMA perspective
Agile software development is immensely popular in the industry, but most teams struggle to sustain its use. Human factors like management support, agile training, agile mindset, and team resilience are often neglected, hindering long-term success. However, research has not explored their underlying mechanisms in depth. Therefore, this study examines if management support impacts the sustained usage of agile methodologies within software development teams. It subsequently investigates the individual and serial mediating effects of agile training, the agile mindset, and team resilience on this relationship. Additionally, it compares the importance and performance of management support, agile training, the agile mindset, and team resilience in infusing agile practices. Finally, it determines these antecedents’ necessity for the enduring success of agile application. Data collected from 391 agile software development professionals using a structured questionnaire. Partial-least-squares structural equation modelling, importance-performance map analysis and necessary condition analysis were used to investigate relationships. The findings underscore the pivotal role of management support in infusing agile practices. Agile training, mindset, and team resilience emerge as critical mediators, with a strong serial mediation effect. While management support is paramount, its practical implementation falls short within teams. All four antecedents are found to be necessary for optimal agile sustainment. Thus, this study significantly advances theoretical understanding by introducing a serial mediation model that elucidates their mechanisms in impacting agile infusion. It extends prior organisational-level findings to the team-level. The study’s quantitative verification of qualitative findings strengthens their generalisability to a broader spectrum of teams. It pioneers in expounding the constructs’ relative importance, performance and necessity, to offer actionable insights for agile practitioners. Finally, it provides methodological guidance to apply importance performance map analysis and necessary condition analysis in agile software development research.
Breast cancer classification based on hybrid CNN with LSTM model
Building support for children and families affected by stroke (BUILD CARE): Study protocol
Childhood stroke is a rare condition that significantly impacts affected children and their families due to children’s frequently persisting cognitive, physical, and behavioural problems. Existing research on adult stroke shows that the built environment plays a major role in their (partial or possible) recovery and everyday life, but its role has been overlooked in children population. This multidisciplinary research study aims to investigate (1) the role of informal (i.e., home, neighbourhood, school) and formal (i.e., hospital, rehabilitation clinic, outpatient clinic) care environments in the everyday life of children and families confronted with childhood stroke; (2) the families’ financial burden resulting from this rare disease and their economic situation likely affecting the access to care, informal care provision and ability to carry out home modifications.; as well as (3) children’s stroke-related cognitive impairments affecting their experiences of the built environment and their care. The research consists of the preparatory research phase, where existing materials are explored, and three main research phases, each related to one or multiple project objectives. A multi-method approach is adopted, including qualitative (in-depth interviews and participatory creative methods) and quantitative (online questionnaire and cognitive assessments) research methods. Participants are children affected by stroke and their families in Austria, Belgium and Germany. This is a 3-year project that will continue until the end of August 2025. Ethical approvals in all countries were obtained at the time of protocol submission, and data collection for all three research phases started in the second half of 2023 and is currently ongoing. This project will offer first insights into the role of built (care) environments in the experiences of families affected by childhood stroke. Findings are expected to deliver information on their design to improve the life of children affected by this rare disease and their families.
Durability and environmental evaluation of rice husk ash sustainable concrete containing carbon nanotubes
Daily briefing: Genetically modified pig-organ transplant trial gets green light
Hydrogen Tunneling and Conformational Motions in Nonadiabatic Proton-Coupled Electron Transfer between Interfacial Tyrosines in Ribonucleotide Reductase
Global burden of cardiovascular diseases attributable to diet low in seafood omega-3 fatty acids from 1990~2021 and forecasting the future trends: A population-based study
Background This research investigates the worldwide influence of cardiovascular diseases (CVD) associated with low intake of seafood omega-3 fatty acids, based on data from the 2021 Global Burden of Disease Study. Method The study evaluated the effects of insufficient seafood omega-3 fatty acid consumption on CVD at international, regional, and country levels. It analyzed variations across different demographics, including age and gender, and explored the relationship between disease burden and the Socio-Demographic Index (SDI). Additionally, it utilized an ARIMA model to predict the incidence of CVD connected to this dietary deficiency until 2050. Result In 2021, diets deficient in seafood omega-3 fatty acids contributed to roughly 737.88 thousand deaths and 17.87 million disability-adjusted life years (DALYs) from CVD, with a noted decrease in this health impact over the period studied. The most substantial effects were seen in the elderly, particularly those aged 75 and above, with males experiencing a higher disease impact. Future forecasts suggest probable declines in disease rates across all SDI areas. However, nations in North Africa and the Middle East are projected to encounter growing difficulties related to CVD stemming from low seafood omega-3 intake by 2030 and 2050. Conclusion These results highlight the critical need for preventive strategies against CVD and stress the significance of dietary management.
Comparison of optical coherence tomography vs. fluorescein angiography-based macular neovascularization classifications in age-related macular degeneration
Modulation of Molecular Quadrupole Moments by Phenyl Side-Chain Fluorination for High-Voltage and High-Performance Organic Solar Cells
Comparison of survival outcomes and anatomically specific severe injuries following traffic accidents among occupants of standard and K-car vehicles: A retrospective cohort study at a teaching hospital in Japan
Road traffic accidents are a global health concern. K-car vehicles, also known as "mini vehicles," are defined as those having an engine displacement <660 cc, vehicle length <3.4 m, width <1.48 m, and height <2.0 m. K-cars have become increasing popular not only in Japan but also in other countries. Compared with standard vehicles, the occupant space of a K-car vehicle is considerably smaller; thus, passengers may be more vulnerable to the external forces generated in a collision, which in turn can lead to deformation of the occupant space and less protection against injuries. However, data are scarce regarding whether K-car vehicles are related to poorer survival outcomes and severe trauma. We conducted a retrospective cohort study involving patients who were injured in four-wheeled vehicle accidents between 2002 and 2023 and admitted to a community teaching hospital in Japan. The vehicle configuration was divided into standard and K-car vehicles. The primary endpoint was in-hospital mortality. Other outcomes included severe trauma, defined as Injury Severity Score (ISS) >15, and anatomically specific severe injury of the head and neck, chest, abdomen, pelvis, and extremities, defined as Abbreviated Injury Scale score ≥3. Of 5331 eligible patients, 2384 (44.7%) were K-car vehicle occupants. In propensity score-matched analysis with 1947 pairs, we observed an increase for in-hospital mortality in the K-car vehicle group (2.6% vs. 4.0%, odds ratio 1.53, 95% confidence interval 1.07–2.19). Compared with standard vehicles, K-car vehicles were associated with a greater risk of severe trauma and serious injuries of the head and neck, chest, abdomen, pelvis, and extremities. These study data should be used to encourage vehicle occupants and automobile manufacturers to consider objective facts regarding the safety of vehicles in a traffic accident.